Instrukcja obsługi Aruba AP-503H


Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Aruba AP-503H (12 stron) w kategorii Punkt dostępu. Ta instrukcja była pomocna dla 4 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/12
Aruba 503H Hospitality Access Points
Installation Guide
Installation Guide | July 2020 1
The Aruba AP-503H Access Points are high-performance, multi-radio wireless devices that can be deployed in
either controller-based (AOS) or controller-less (Instant) modes in hospitality and branch or teleworker
deployments. The Aruba AP-503H Hospitality Access Points support the full 802.11ax (Wi-Fi 6) featureset with
dual 2x2 MIMO radios, deliver locationing functions, and can serve as a flexible IOT gateway, delivered through
the built-in BLE and 802.15.4 radio.
A variety of mounting scenarios are supported by a range of mount kits (sold separately). Make sure to purchase
the correct mount kit for the intended deployment of the AP.
Hardware Overview
The following sections outline the hardware components of the Aruba AP-503H Access Points.
Figure 1 AP-503H (front view)
1
2Aruba 503H Hospitality Access Points | Installation Guide
Figure 2 AP-503H (side and rear view)
Figure 3 AP-503H (bottom view)
Security
Screw
Reset
DC
Adapter
12V
E0
Console
E1 E2
Aruba 503H Hospitality Access Points | Installation Guide 3
LEDs
The hidden LED displays located on the front panel of the access point indicate the following functions:
System Status
The System Status LED indicates the operating condition of the access point, See Table 1.
Table 1 System Status LEDs
1 Blinking: one second on/one second off, 2 second cycle.
2 Flashing Pattern 1: mostly on, briefly off, 2 second cycle.
3 Flashing Pattern 2: mostly off, briefly on, 2 second cycle.
Radio Status
The Radio Status LED indicates the operating mode of the access point’s radios. See Table 2.
Table 2 Radio Status LEDs
1 Alternating: one second each color, 2 second cycle.
LED Display Settings
The LEDs have three operating modes that can be selected in the system management software:
Default mode: Refer to Table 1 and Table 2
Off mode: LEDs are off
Blink mode: LEDs blink green
Force the LEDs into off mode and back to software defined mode by pressing the reset button for a short
duration. Warning: pressing the reset button for longer than 10 seconds may cause the AP to reset and return to
factory default state.
Color/State Meaning
Off Device powered off
Green- blinking 1Device booting, not ready
Green- solid Device ready, fully functional, no network restrictions
Green- flashing pattern 12Device ready, fully functional, uplink negotiated in sub-optimal speed (<1Gbps)
Green- flashing pattern 23Deep sleep mode
Red System error condition - Immediate attention required
Color/State Meaning
Off AP powered off, or both radios disabled
Green- solid Both radios enabled in access mode
Green- blinking One radio enabled in access mode, other disabled
Amber- solid Both radios enabled in monitor mode
Amber- blinking One radio enabled in monitor mode, other disabled
Green/Amber-
alternating1Green: one radio in access mode
Amber: one radio in monitor mode


Specyfikacje produktu

Marka: Aruba
Kategoria: Punkt dostępu
Model: AP-503H

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Aruba AP-503H, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje Punkt dostępu Aruba

Aruba

Aruba AP-504 Instrukcja

8 Października 2024
Aruba

Aruba AP-318 Instrukcja

29 Września 2024
Aruba

Aruba AP-577 Instrukcja

29 Września 2024
Aruba

Aruba AP-303H Instrukcja

23 Września 2024
Aruba

Aruba 175P Instrukcja

19 Września 2024
Aruba

Aruba 205H Instrukcja

9 Września 2024
Aruba

Aruba AP-93H Instrukcja

9 Września 2024
Aruba

Aruba AP-503H Instrukcja

5 Września 2024

Instrukcje Punkt dostępu

Najnowsze instrukcje dla Punkt dostępu