Instrukcja obsługi Aruba AP-303H


Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Aruba AP-303H (15 stron) w kategorii Punkt dostępu. Ta instrukcja była pomocna dla 3 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/15
Aruba 303H Series Hospitality Access Points
Installation Guide
AP-303H-IG-01 | September 2017 1
The Aruba 303H Series access point is a high-performance dual-radio wireless device for hospitality and branch
deployments.
This access point use Multiple-Input, Multiple-Output (MIMO) technology to provide secure wireless connectivity
for both 2.4GHz 802.11 b/g/n and 5GHz 802.11 a/n/ac WiFi.
Alternatively, the wired Ethernet ports located on the bottom of the device allow users to connect to the device
directly when linked by an Ethernet cable.
The 303H Series access point can be attached to a standard single-gang wall box using the mount provided, or
converted into a desk-mounted remote access point for branch office deployments using the AP-303H-MNTD
mount kit (sold separately).
The 303H Series access point provides the following capabilities:
IEEE 802.11a/b/g/n/ac operation as a wireless access point
IEEE 802.11a/b/g/n/ac operation as a wireless air monitor
Compatibility with IEEE 802.3af/at PoE
Central management configuration
Supports PoE-in (E0 port)/PoE-out (E3 port)
Support for selected USB peripherals
Integrated Bluetooth Low Energy (BLE) radio
Package Contents
303H Series Access Point
Single gang wall-box mounting bracket
(2x) #6-32 slotted screws
T8H Torx security screw
Hardware Overview
The following sections outline the hardware components of the 303H Series access point.
Figure 1 303H Series (front view)
Inform your supplier if there are any incorrect, missing, or damaged parts. If possible, retain the carton, including
the original packing materials. Use these materials to repack and return the unit to the supplier if needed.
PoE-PSE Status
Radio Status
System Status
2Aruba 303H Series Hospitality Access Points | Installation Guide
LED
The LED displays located on the front and bottom of the access point indicate the following functions:
System Status
The System Status LED indicates the operating condition of the access point. See Table 1.
Table 1 System Status LED
1 blinking: 1s on/1s off
2 flashing: on/off repeated in less than 1s
Radio Status
The Radio Status LED indicates the operating mode of the access point’s radios. See Table 2.
Table 2 Radio Status LED
Color/State Meaning
Off Device is powered off
Green/solid Device is ready; fully functional
Green/blinking1Device is booting; not ready
Green/flashing2Device is ready; uplink negotiated at suboptimal speed (<1Gbps)
Amber/solid Device is ready; operating in power-save mode (PoE source: 802.3af)
Amber/flashing Device is ready; operating in power-save mode, with uplink negotiated at
suboptimal speed (<1Gbps)
Red/solid Error condition
Color/State Meaning
Off Meets one of the following conditions:
both radios are disabled
device is powered off
Green/solid Both radios enabled in access mode
Green/blinking1One radio enabled in access mode; one radio
disabled
Amber/solid Both radios enabled in monitor mode
Amber/blinking One radio enabled in monitor mode, other disabled
Alternating3One radio in access mode, other radio in monitor mode
Aruba 303H Series Hospitality Access Points | Installation Guide 3
Network Status (E1-E3)
The Network Status LED, located on the sides of the E1-E3 ports, indicates activity transmitted to/from the wired
ports. See Table 3.
Table 3 Network Status LED
PoE-PSE Status (E3)
The PoE-PSE LED located above the E3 port and indicates when the access point is operating as Power Sourcing
Equipment (PSE), providing Power over Ethernet (PoE) to an external device that is physically connected to the
E3 port by Ethernet cable. See Table 4.
Table 4 PoE-PSE Status LED
LED Display Settings
The LEDs have three operating modes that can be selected in the system
management software:
Default mode: Refer to Table 1 Table 4-
Off mode: LEDs are off
Blink mode: LEDs blink green
Color/State Meaning
Off Meets one of the following conditions:
device is powered off
port is disabled
no link/activity
Green/solid Link established at max speed (1Gbps)
Green/blinking Activity detected across a max speed link
Amber/solid Link established at reduced speed (10/100Mbps)
Amber/blinking Activity detected across a reduced speed link
Color/State Meaning
Off Access point not supplying PoE, or powered off
Green/solid Access point supplying power to a connected device
Green/blinking Negotiating PoE power supplied to a connected device


Specyfikacje produktu

Marka: Aruba
Kategoria: Punkt dostępu
Model: AP-303H

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Aruba AP-303H, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje Punkt dostępu Aruba

Aruba

Aruba AP-504 Instrukcja

8 Października 2024
Aruba

Aruba AP-318 Instrukcja

29 Września 2024
Aruba

Aruba AP-577 Instrukcja

29 Września 2024
Aruba

Aruba AP-303H Instrukcja

23 Września 2024
Aruba

Aruba 175P Instrukcja

19 Września 2024
Aruba

Aruba 205H Instrukcja

9 Września 2024
Aruba

Aruba AP-93H Instrukcja

9 Września 2024
Aruba

Aruba Instant 100 Instrukcja

22 Sierpnia 2024

Instrukcje Punkt dostępu

Najnowsze instrukcje dla Punkt dostępu

Cisco

Cisco MR12 Instrukcja

14 Października 2024
Draytek

Draytek VigorAP 920R Instrukcja

13 Października 2024
Netgear

Netgear WNDAP360 Instrukcja

12 Października 2024
TP-Link

TP-Link Festa F65-Wall Instrukcja

9 Października 2024
D-Link

D-Link DWL-1000AP+ Instrukcja

9 Października 2024
D-Link

D-Link DWL-700AP Instrukcja

9 Października 2024