Instrukcja obsługi Heatmiser DT-W
Heatmiser
Termostaty
DT-W
Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Heatmiser DT-W (13 stron) w kategorii Termostaty. Ta instrukcja była pomocna dla 15 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek
Strona 1/13
1Model: DT-W Model: DT-W
2Wireless Series 2Model: DT-W
Model: DT-W
Wireless Series1
Table of Contents
1
2
3-4
5-6
7-8
9
10-11
11-12
13-14
15
16
16
17
17
18
18
19-22
Product Image
Table of Contents
What is a Room Thermostat?
Installation Procedure
Installing the Batteries
Replacing the Batteries
Pairing with the RC1-W Receiver
Pairing with the UH1-W Wiring Centre
LCD Display
Temperature Display
Locking the Thermostat
Setting the Temperature
Frost Protection
Power On / O
Re-calibrating the Thermostat
Factory Reset
Optional Features
43 Wireless Series Model: DT-W
What is a Room Thermostat?
If your heating system is a boiler with radiators, there will usually be only one room
thermostat to control the whole house. But you can have dierent temperatures
in individual rooms by installing thermostatic radiator valves (TRVs) on individual
radiators.
If you don’t have TRVs, you should choose a temperature that is reasonable for the
whole house. If you do have TRVs, you can choose a slightly higher setting to make
sure that even the coldest room is comfortable, then prevent any overheating in other
rooms by adjusting the TRVs.
Room thermostats need a free ow of air to sense the temperature, so they must not
be covered by curtains or blocked by furniture. Nearby electric res, televisions, wall
or table lamps may also prevent the thermostat from working properly.
A room thermostat simply switches the heating system on and o as necessary.
It works by sensing the air temperature, switching on the heating when the air
temperature falls below the thermostat setting, and switching it o once this set
temperature has been reached.
Setting a room thermostat to a higher temperature will not make the room heat up
any faster. How quickly the room heats up depends on the design & size of the heating
system.
Similarly reducing the temperature setting does not aect how quickly the room cools
down. Setting a programmable room thermostat to a lower temperature will result in
the room being controlled at a lower temperature, and saves energy.
The way to set and use your room thermostat is to nd the lowest temperature settings
that you are comfortable with, and then leave it alone to do its job.
The best way to do this is to set the room thermostat to a low temperature
– say 18°C , and then turn it up by 1°C each day until you are comfortable with the
temperature. You won’t have to adjust the thermostat further. Any adjustment above
this setting will waste energy and cost you more money.
Specyfikacje produktu
| Marka: | Heatmiser |
| Kategoria: | Termostaty |
| Model: | DT-W |
Potrzebujesz pomocy?
Jeśli potrzebujesz pomocy z Heatmiser DT-W, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą
Instrukcje Termostaty Heatmiser
13 Października 2024
10 Października 2024
8 Sierpnia 2024
4 Lipca 2024
3 Lipca 2024
2 Lipca 2024
Instrukcje Termostaty
- Termostaty AEG
- Termostaty SilverCrest
- Termostaty Theben
- Termostaty Siemens
- Termostaty Eberle
- Termostaty BTicino
- Termostaty Emos
- Termostaty Buderus
- Termostaty Danfoss
- Termostaty Delta Dore
- Termostaty Elro
- Termostaty Vemer
- Termostaty Salus
- Termostaty Carrier
- Termostaty Stiebel Eltron
- Termostaty White Rodgers
- Termostaty Horstmann
- Termostaty Oventrop
- Termostaty Seitron
- Termostaty Plieger
- Termostaty Xavax
- Termostaty Fantini Cosmi
- Termostaty Orbis
- Termostaty Grasslin
- Termostaty ICY
- Termostaty Heimeier
- Termostaty Drayton
- Termostaty Watts
- Termostaty TrickleStar
Najnowsze instrukcje dla Termostaty
15 Października 2024
15 Października 2024
14 Października 2024
14 Października 2024
13 Października 2024
12 Października 2024
11 Października 2024
11 Października 2024
10 Października 2024
10 Października 2024