Instrukcja obsługi Heatmiser DS1-EL
Heatmiser
Termostaty
DS1-EL
Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Heatmiser DS1-EL (4 stron) w kategorii Termostaty. Ta instrukcja była pomocna dla 3 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek
Strona 1/4
Wiring Diagram
The Heatmiser DS1-EL dial type thermostat is designed
specically for electric underoor heating.
This thermostat incorporates the following functions;
• Adjustable Switching Dierential
• Digital LCD
• 230v AC, 13A Switching
Introduction 1
4
Model: DS1-EL
RCD
MAINS SUPPL
Y
L N
MATTING OR WIRE
FlOOR PROBE
DS1-EL
Want More Information?
Call our support team on:
+44 (0)1254 669090
Or view technical specications
directly on our website:
www.heatmiser.com
IN ORDER TO AVOID ANY RISK OF ELECTRIC SHOCK, TURN OFF THE POWER TO THE
HEATING SYSTEM.
This dial thermostat is designed to be surface mounted.
1. Separate the front part of the thermostat by unscrewing securing screws on the
bottom face of the thermostat.
2. Mark 2 hole positions on the wall using the backplate as a positioning template. Drill at
the marked positions and insert a wall plug in to each hole.
3. Terminate the thermostat as per wiring diagram and screw the DS1-EL back plate to the
back box.
4. Reconnect the thermostat front plate and insert the securing screws.
Installation
PDF FAQ
2
3
In normal mode, the display shows the actual room temperature. To change the set point,
rotate the dial until the digital LCD displays the new set temperature.
Setting The Temperature
Display Icons
The Heatmiser DS1-EL has a lock facility. To lock the thermostat, press and hold down the
dial for 10 seconds. You will see a lock symbol appear. To unlock, repeat the steps above.
Heating ON Keypad Locked
The Heatmiser DS1-EL oers 1, 2 and 3°C switching dierential.
With a 1°C switching dierential the heating will switch on 1°C below the set
temperature and will turn o when the set temperature is reached.
A 2°C will turn the heating on 2°C below the set temperature.
3°C will switch the heating on 3°C below the set temperature.
To set the dierential, set the DIP switches according to the table below.
This setting is only required when the sensor option is set to Air and Floor mode.
The setting is used to protect the oor surface from overheating.
The oor temperature limit can be set to 20, 28 or 40°C.
To set the required oor limit temperature, set the DIP switches according to the table.
The thermostat has three modes of operation. Select the desired mode,
and set the DIP switches according to the table.
The DIP switches can be accessed from the back of thermostat.
Air Sensor: Uses the built in air sensor only.
Air Sensor & Floor Limiting Sensor: Uses the built in air sensor but also uses the
remote oor sensor to ensure the oor temperature doesn’t overheat.
Floor Sensor: Uses the remote oor sensor only.
Lock Facility
Switching DierentialFloor Temperature Limit
Sensor Option
1 2
1 °C Switching
2 °C Switching
3 °C Switching
20°C
28°C
40°C
Air Sensor
Air & Floor
Floor Sensor
1
2
3
1
2
3
1
2
3
Switch 1 & 2 OFF
Switch 1 ON and Switch 2 OFF
Switch 1 OFF and Switch 2 ON
Switch 5 & 6 OFF
Switch 5 ON and Switch 6 OFF
Switch 5 OFF and Switch 6 ON
Switch 3 & 4 OFF
Switch 3 ON and Switch 4 OFF
Switch 3 OFF and Switch 4 ON
22
2
33
3
11
1
Should the oor temperature be achieved (even if the desired room temperature has
not) the heating will turn o. The Heat Active Icon will ash in this case.
Specyfikacje produktu
| Marka: | Heatmiser |
| Kategoria: | Termostaty |
| Model: | DS1-EL |
Potrzebujesz pomocy?
Jeśli potrzebujesz pomocy z Heatmiser DS1-EL, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą
Instrukcje Termostaty Heatmiser
13 Stycznia 2025
13 Października 2024
10 Października 2024
8 Sierpnia 2024
7 Sierpnia 2024
4 Lipca 2024
3 Lipca 2024
2 Lipca 2024
Instrukcje Termostaty
- Termostaty AEG
- Termostaty SilverCrest
- Termostaty Theben
- Termostaty Siemens
- Termostaty Eberle
- Termostaty BTicino
- Termostaty Remeha
- Termostaty Emos
- Termostaty Buderus
- Termostaty Danfoss
- Termostaty Delta Dore
- Termostaty Vaillant
- Termostaty Worcester
- Termostaty Elro
- Termostaty Junkers
- Termostaty Vemer
- Termostaty Salus
- Termostaty Carrier
- Termostaty Stiebel Eltron
- Termostaty White Rodgers
- Termostaty Horstmann
- Termostaty Oventrop
- Termostaty Seitron
- Termostaty Plieger
- Termostaty Zehnder
- Termostaty Xavax
- Termostaty Fantini Cosmi
- Termostaty Orbis
- Termostaty Grasslin
- Termostaty ICY
- Termostaty Heimeier
- Termostaty Drayton
- Termostaty Watts
- Termostaty TrickleStar
Najnowsze instrukcje dla Termostaty
15 Stycznia 2025
15 Stycznia 2025
14 Stycznia 2025
13 Stycznia 2025
13 Stycznia 2025
15 Października 2024
15 Października 2024
14 Października 2024
14 Października 2024
13 Października 2024