Instrukcja obsługi Chapin 61808
Chapin
pistolet do malowania
61808
Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Chapin 61808 (36 stron) w kategorii pistolet do malowania. Ta instrukcja była pomocna dla 6 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek
Strona 1/36
Model 61808 • 4G/ 15L
011553 R0713
Carefully Read These Instructions Before Use
Chapin International, Inc
P.O. Box 549
700 Ellicott St.
Batavia, NY 14021-0549 U.S.A.
1-800-950-4458
www.chapinmfg.com
WARNING
DO NOT RETURN THIS
SPRAYER TO STORE
Call: 1-800-950-4458
www.chapinmfg.com
WARNING
WARNING: Handling the brass parts of this product will expose you to lead, a chemical
known to the State of California to cause birth defects and other reproductive harm.
Wash hands after handling.
CAUTION
1E
WARNING: Improper use or failure to follow instructions can result in explosive
failure causing serious eye or other injury. For safe use of this product you must read
and follow all instructions. Do not leave a pressurized sprayer in the hot sun. Heat can cause
pressure build-up resulting in possible explosion. Do not store or leave solution in tank after
use. Always wear goggles, gloves, long sleeve shirt, long pants and full foot protection when
spraying. Never use any tool to remove pump if there is pressure in the pressure chamber.
Never pressurize sprayer by any means other than the original pump. Do not attempt to
modify this sprayer. Replace parts only with manufacturer’s original parts. Never spray
ammable, caustic, acidic, chlorine, bleach or other corrosive solutions or
heat, pressure, or gas producing chemicals. Always read and follow chemical
manufacturer’s instructions before use with this sprayer as some chemicals may
be hazardous when used with this sprayer.
• PRE-USE CHECK: Before each use check tightness of hose nut to be sure hose is
securely attached to the shut-off assembly. Insure hose is securely attached to the
pump outlet by tightening hose nut. Insure that all nozzle and wand connections
are tight. Insure the three bolts (underside of base) used to attach the piston
cylinder are tight.
• Do Not exceed a tank solution temperature of 120º F/ 49º C.
NOTE: The tank and hose may have residual water in it due to quality testing
performed on the sprayer.
SK 1158-1
1. Poly
Nozzle Cap
2. Retaining
Nut
3. Nozzle
Body
4. Nozzle
Gasket
5. Elbow
Figure 2Figure 1
Nozzle
Gasket
Retaining Nut
Elbow
Fan Nozzle Tip
2E
APPLICATIONS & USE FOR YOUR SPRAYER
Avoid using a sprayer for general cleaning purposes if plant protection or herbicide chemicals have
already been used in the sprayer. If a sprayer has been used for plant protection or as an herbicide, clean
the sprayer completely (see cleaning section) before using.
Plant Food: Use different spray patterns for optimum foliage feeding or for fungicide and pesticide
application.
Herbicides: Reduce weeds and unwanted plants but avoid using the same sprayer for plant feeding or
protection without thoroughly cleaning (see cleaning section) the sprayer first.
General Household Use: Apply detergents, cleaning solutions, warm water (do not exceed
120°F/49°C) or nontoxic household cleaning chemicals for carpets, floors, walls, glass, counter tops and
ceilings. DO NOT use sprayer that has been used with herbicides, pesticides or other toxic chemicals for
household applications.
General Outdoor Use: Use the sprayer for cleaning windows or with a detergent for general purpose
cleaning.
SPRAYER COMPONENTS & USE INFORMATION
NOZZLE ASSEMBLY
Figure 1
Unscrew the nozzle cap (1) from the nozzle body (3) with retaining nut (2) fastened tightly to the
elbow (5). Unscrew the retaining nut . Push the nozzle body (2) (3) (4) with the nozzle gasket out of
the retaining nut . To reinstall the nozzle, reverse the above instructions.(2)
Figure 2
Unscrew the retaining nut from the elbow and push the fan nozzle tip and gasket out of the retaining
nut. To reinstall the nozzle, reverse the above instructions.
Specyfikacje produktu
| Marka: | Chapin |
| Kategoria: | pistolet do malowania |
| Model: | 61808 |
Potrzebujesz pomocy?
Jeśli potrzebujesz pomocy z Chapin 61808, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą
Instrukcje pistolet do malowania Chapin
17 Września 2024
16 Września 2024
16 Września 2024
16 Września 2024
14 Września 2024
14 Września 2024
13 Września 2024
12 Września 2024
12 Września 2024
10 Września 2024
Instrukcje pistolet do malowania
- pistolet do malowania Worx
- pistolet do malowania Yato
- pistolet do malowania Parkside
- pistolet do malowania Black & Decker
- pistolet do malowania Einhell
- pistolet do malowania Silverline
- pistolet do malowania Ozito
- pistolet do malowania Wagner
- pistolet do malowania Meec Tools
- pistolet do malowania Westfalia
- pistolet do malowania Aerotec
- pistolet do malowania Ferm
- pistolet do malowania Fieldmann
- pistolet do malowania PowerPlus
- pistolet do malowania XU1
- pistolet do malowania EasyMaxx
- pistolet do malowania Metabo
- pistolet do malowania Sun Joe
- pistolet do malowania Tacklife
- pistolet do malowania Magnum
- pistolet do malowania Bort
- pistolet do malowania Power Craft
- pistolet do malowania Pattfield
- pistolet do malowania Defort
- pistolet do malowania Truper
- pistolet do malowania Abac
- pistolet do malowania Meister Craft
- pistolet do malowania Probuilder
- pistolet do malowania Birchmeier
- pistolet do malowania Wagner SprayTech
- pistolet do malowania Elektra Beckum
- pistolet do malowania Paintmaxx
- pistolet do malowania Deco
- pistolet do malowania MSW
Najnowsze instrukcje dla pistolet do malowania
15 Października 2024
15 Października 2024
8 Października 2024
8 Października 2024
8 Października 2024
8 Października 2024
7 Października 2024
4 Października 2024
4 Października 2024
4 Października 2024