Instrukcja obsługi Black & Decker XT2020

Black & Decker Strijkijzers XT2020

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Black & Decker XT2020 (24 stron) w kategorii Strijkijzers. Ta instrukcja była pomocna dla 3 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF

Strona 1/24

www.blackanddecker.com

9 10 11

123

456

English 3

Italiano 7

Español 11

Português 15

∂ÏÏËÓÈÎ· 19

ENGLISH

Intended use

Your Black & Decker iron has been designed for ironing

garments made of linen, cotton, silk, wool and synthetic

materials. This product is intended for household use only.

Safety instructions

◆Warning! When using mains-powered appliances, basic

safety precautions, including the following, should always

be followed to reduce the risk of fire, electric shock and

personal injury.

◆Read all of this manual carefully before using the appliance.

◆The intended use is described in this manual. The use of

any accessory or attachment or the performance of any

operation with this appliance other than those recommended

in this instruction manual may present a risk of personal

injury.

◆Retain this manual for future reference.

Using your appliance

◆Always take care when using the appliance.

◆Do not use the appliance outdoors.

◆Do not operate the appliance if your hands are wet.

Do not operate the appliance if you are barefoot.

◆Guide the power supply cord neatly so it does not hang

over the edge of a worktop and cannot be caught

accidentally or tripped over.

◆Never pull the power supply cord to disconnect the plug

from the socket. Keep the power supply cord away from

heat, oil and sharp edges.

◆If the power supply cord is damaged during use,

disconnect the appliance from the power supply

immediately. Do not touch the power supply cord before

disconnecting from the power supply.

◆Disconnect the appliance from the power supply when not

in use and before cleaning.

Safety of others

◆Do not allow children or any person unfamiliar with these

instructions to use the appliance.

◆Do not allow children or animals to come near the work

area or to touch the appliance or power supply cord.

Close supervision is necessary when the appliance is

used near children.

After use

◆Switch off, remove the plug from the socket and let the

appliance cool down before leaving it unattended and

before changing, cleaning or inspecting any parts of the

appliance.

◆When not in use, the appliance should be stored in a dry

place. Children should not have access to stored

appliances.

Inspection and repairs

◆Before use, check the appliance for damaged or defective

parts. Check for breakage of parts, damage to switches

and any other conditions that may affect its operation.

◆Do not use the appliance if any part is damaged or defective.

◆Have any damaged or defective parts repaired or replaced

by an authorised repair agent.

◆Before use, check the power supply cord for signs of

damage, ageing and wear.

◆Do not use the appliance if the power supply cord or

mains plug is damaged or defective.

◆If the power supply cord or mains plug is damaged or

defective it must be repaired by an authorised repair

agent in order to avoid a hazard. Do not cut the power

supply cord and do not attempt to repair it yourself.

◆Never attempt to remove or replace any parts other than

those specified in this manual.

Electrical safety

◆Always check that the mains voltage corresponds to the

voltage on the rating plate.

◆This product must be earthed.

◆Do not immerse the appliance, power supply cord

or plug in water or other liquid.

◆If it is necessary to use an extension cable, use

an approved 3-core cable suitable for the power

input of this product (see rating plate).

Additional safety instructions for irons

◆Always route the cord carefully to avoid a tripping hazerd.

◆Do not use the appliance near water.

◆Do not place the appliance near heat sources or directly

under cabinets. Do not use the appliance in the presence

of explosive or flammable materials.

◆The filling apperture must not be opened during use.

◆Steam may escape from the soleplate.

◆Surfaces may be hot during use and during the cooldown

period.

◆Set the temperature control dial to the min position

before plugging in or out.

◆Let the appliance cool down before leaving it unattended

and before cleaning or inspecting any parts of the appliance.

◆The power supply cord should not touch the hot soleplate

during use or during the cool down period.

◆Do not touch the soleplate until it has cooled down.

◆Wait until the appliance has cooled down before

emptying the water tank as the water may still be hot.

◆Always diconnect the appliance from the supply before

filling, emptying, cleaning, or carying out any

maintenance on the appliance.

Specyfikacje produktu

Marka:	Black & Decker
Kategoria:	Strijkijzers
Model:	XT2020

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Black & Decker XT2020, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą

Twoje imię*

Twój email*

Napisz tutaj swoje pytanie

Instrukcje Strijkijzers Black & Decker

Black & Decker F985 Instrukcja

11 Października 2024

Black & Decker XT2020 Instrukcja

9 Października 2024

Black & Decker F611 Instrukcja

9 Października 2024

Black & Decker F2000 Instrukcja

6 Października 2024

Black & Decker ICR06X Instrukcja

9 Sierpnia 2024

Black & Decker F65E Instrukcja

9 Sierpnia 2024

Black & Decker ICR09X Instrukcja

6 Lipca 2024

Black & Decker BR950 Instrukcja

6 Lipca 2024

Black & Decker F920C Instrukcja

6 Lipca 2024

Black & Decker ICR2040 Instrukcja

5 Lipca 2024

Instrukcje Strijkijzers

Najnowsze instrukcje dla Strijkijzers

Scarlett SC-131S Instrukcja

13 Października 2024

Bosch TDI953222V Instrukcja

13 Października 2024

Alpina SF-1303 Instrukcja

13 Października 2024

ECG NZ 260 Instrukcja

12 Października 2024

Day 72443 Instrukcja

12 Października 2024

Clatronic DBS 3001 Instrukcja

12 Października 2024

Orbegozo SV 2210 Instrukcja

11 Października 2024

Sunbeam 3980 Instrukcja

10 Października 2024

TriStar ST-8360 Instrukcja

10 Października 2024

Tefal FV9430 Ultimate Autoclean Instrukcja

6 Października 2024