Instrukcja obsługi Yakima RaptorAero

Yakima Bagażnik rowerowy RaptorAero

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Yakima RaptorAero (18 stron) w kategorii Bagażnik rowerowy. Ta instrukcja była pomocna dla 8 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF

Strona 1/18

1033402A-1/18

RaptorAero

Part #1033402 Rev.A

THREADED PLUG (1)

GUIDE PLUG (1)

CLIP (1)

WHEEL TRAY (1)

(JAW)

RED

KNOB

(1)

SPRING (1)

SHORT CARRIAGE

BOLT (1)

WASHER (1)

LOCK WASHER (1)

WING NUT (1)

WHEEL

STRAP (2)

WHEEL TRAY

END CAP (2)

WRENCH (1)

SHORT WHEEL

TRAY BOLT (1)

LONG CARRIAGE

BOLT (2)

SHORT HEX BOLT,

FOR SMALL BAIL (3)

LONG HEX BOLT,

FOR LARGE BAIL (3)

BARREL SLEEVE (3)

SPACER (3)

BACKBONE (3)

NUT (3)

SET OF PADS (3)

SMALL BAIL (3),

MARKED “A”

LARGE BAIL (3),

MARKED “B”

THUMB-WHEEL (3)

(HOOP ASSEMBLY)

(BASEPLATE)

IMPORTANT WARNING: IT IS CRITICAL THAT ALL YAKIMA RACKS AND ACCESSORIES BE PROPERLY AND SECURELY

ATTACHED TO YOUR VEHICLE. IMPROPER ATTACHMENT COULD RESULT IN AN AUTOMOBILE ACCIDENT, AND COULD

CAUSE SERIOUS BODILY INJURY OR DEATH TO YOU OR TO OTHERS. YOU ARE RESPONSIBLE FOR SECURING THE RACKS

AND ACCESSORIES TO YOUR CAR, CHECKING THE ATTACHMENTS PRIOR TO USE, AND PERIODICALLY INSPECTING THE

PRODUCTS FOR ADJUSTMENT, WEAR, AND DAMAGE. THEREFORE, YOU MUST READ AND UNDERSTAND ALL OF THE INSTRUCTIONS

AND CAUTIONS SUPPLIED WITH YOUR YAKIMA PRODUCT PRIOR TO INSTALLATION OR USE. IF YOU DO NOT UNDERSTAND ALL

OF THE INSTRUCTIONS AND CAUTIONS, OR IF YOU HAVE NO MECHANICAL EXPERIENCE AND ARE NOT THOROUGHLY FAMILIAR

WITH THE INSTALLATION PROCEDURES, YOU SHOULD HAVE THE PRODUCT INSTALLED BY A PROFESSIONAL INSTALLER SUCH AS

A QUALIFIED GARAGE OR AUTO BODY SHOP.

1 or 2 bikes .......... 16” min. — 38” max.

MORE THAN 2 BIKES ON ROUND OR SQUARE BARS ONLY:

3+ bikes .......... 18” min. — 38” max.

ELONGATED KEY (2)

SNAP AROUND (3)

BASEPLATE BOLT (2)

WHEELTRAY

BOLT (1)

HEX KEY (1)

FACTORY BARS

ATTACHMENT HARDWARE

(UNIVERSAL MIGHTY MOUNTS)

Crossbar-spread

requirements:

(DISTANCE BETWEEN TOWERS)

faCtory bar weight limits

2 bikes = MAXIMUM LOAD

EACH BIKE = 30 lbs./14 kg

(do not exceed rack weight limit)

ROUND AND SQUARE BARS

ATTACHMENT HARDWARE

1033402A-2/18

Always use the short bolt with small bail — and long bolt with large bail.

Press a pad into the

smaller bail (marked “A”).

• Close and compress the

mount around the bar.

• Insert a short hex bolt into

the hex opening in the barrel

sleeve, and insert into mount.

Press a pad into the backbone.

(You may need to rotate the pad

to ﬁt correctly.)

INSTALL PADS TO ONE SET OF MOUNTS.

Place the mount onto the bar, opening toward the front of the car.

ATTACH SMALL BAIL TO

BACKBONE.

IF THE BOLT DOES NOT EXTEND,

remove the bail, and set the end

into the lower slot.

Bolt threads

MUST extend

below the

closed bail.

If the bolt threads still do not

extend below the closed bail:

Always install the

pad on the bail for

this ﬁtting process.

Attach the thumb-wheel:

If there is any looseness, or the mounts can slide

on the bar, follow the ﬁtting process again.

FACTORY

CROSSBARS ONLY:

Start here to ﬁnd the Universal MightyMount

parts that ﬁt your crossbars.

Remove the ﬁtted mount from the bar.

BAIL

BACKBONE

Repeat the ﬁtting process

until the MightyMount

conforms to the size of your

crossbars when the wheel

is tightened.

• Assemble the remaining mounts, and

carefully set them aside.

• Do not discard the unused parts (you

may use them on future vehicles).

• CONTINUE TO STEP 9.

• Use the larger bail (marked “B”)

with longer bolt.

• Repeat step 2 and 3.

ROUND OR SQUARE

CROSSBARS,

continue to step 7.

Use the upper hinge slot

on the backbone.

1033402A-3/18

INSTALL

RED KNOB

• Choose access from

passenger or driver side.

• Red knob should face you

when the Raptor Aero is

attached to wheel tray.

jAwS

guide

Plug

Red knob

thReAded

Plug

• Place the GUIDE PLUG into the

hole on one side of the jaws.

• Slide the red knob‘s bolt threads

through the guide plug.

guide Plug

• Insert the Threaded Plug into

the other hole.

• Place spring between guide

plug and threaded plug.

• Slide knob through spring

and into threaded plug.

thReAded

Plug

Turn the red knob

clockwise to engage

the threaded plug.

SPRing

Tighten knob completely until

threaded end is exposed.

Slide the “E”clip into groove on end.

A coin or a key may

provide added leverage.

Open red knob

completely.

SKS® Lock Cores are optional.

To install SKS® Lock Cores, refer to lock

instructions.

NOTE: If not using lock,

leave plug in place.

ROUND OR SQUARE BARS: Install the SnapArounds.

—DO NOT INSTALL Universal MightyMounts on round or square bars!

Remove the tabs with

scissors or pliers. Attach 2 SnapArounds

on the front crossbar,

and 1 on the rear

crossbar.

JAW ASSEMBLY (Round, Square, or Factory Crossbars)

square bars onlY : round and square bars :

Loosen the tabs by

bending them repeatedly.

Specyfikacje produktu

Marka:	Yakima
Kategoria:	Bagażnik rowerowy
Model:	RaptorAero

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Yakima RaptorAero, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą

Twoje imię*

Twój email*

Napisz tutaj swoje pytanie

Instrukcje Bagażnik rowerowy Yakima

Yakima HoldUp +2 Instrukcja

3 Października 2024

Yakima JustClick 2 Instrukcja

18 Września 2024

Yakima RidgeBack 5 Instrukcja

10 Września 2024

Yakima FullSwing Instrukcja

9 Września 2024

Yakima RaptorAero Instrukcja

1 Września 2024

Yakima ForkChop Instrukcja

6 Lipca 2024

Yakima DoubleDown Instrukcja

4 Lipca 2024

Instrukcje Bagażnik rowerowy

Najnowsze instrukcje dla Bagażnik rowerowy

Thule T2 Pro XT 9036XT Instrukcja

15 Października 2024

Eufab 16411 Instrukcja

9 Października 2024

Buzz Rack Twinbuzz H Instrukcja

7 Października 2024

Buzz Rack Eazzy H2 Instrukcja

7 Października 2024

Buzz Rack Eazzy H1 Instrukcja

7 Października 2024

Buzz Rack E-Scorpion H2 Instrukcja

7 Października 2024

Buzz Rack Moose 4 Instrukcja

7 Października 2024

Buzz Rack Buzzski H Instrukcja

7 Października 2024

Buzz Rack E-Hornet H3 Instrukcja

7 Października 2024

Buzz Rack Pilot S Instrukcja

7 Października 2024