Instrukcja obsługi V-TAC VT-81013

V-TAC detektor ruchu VT-81013

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla V-TAC VT-81013 (3 stron) w kategorii detektor ruchu. Ta instrukcja była pomocna dla 3 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF

Strona 1/3

MODEL VT-81013

SKU 23429

INPUT VOLTAGE AC: 110-240V, 50/60 Hz

RATED LOAD

Max. 1200W (220-240V/AC)

800W (110-130V/AC)

600W (220-240V/AC)

(110-130V/AC)300W

TIME DELAY Min. 10sec ±3sec

Max. 12min ±1min

DETECTION

RANGE 360°

DETECTION

DISTANCE 3m (radius)

DETECTION

MOTION SPEED 0.6-1.5m/s

WORKING

TEMPERATURE -20°C to +40°C

AMBIENT LIGHT <3-2000 LUX (Adjustable)

In case of any query/issue with the product, please reach out to us at: support@v-tac.eu

For More products range, inquiry please contact our distributor or nearest dealers.

V-TAC EUROPE LTD. Bulgaria, Plovdiv 4000, bul.L.Karavelow 9B

MULTI-LANGUAGE

MANUAL QR CODE

Please scan the QR code

to access the manual in

multiple languages.

INSTRUCTION MANUAL

REAL PRESENCE SENSOR

TECHNICAL DATA

INTRODUCTION & WARRANTY

Thank you for selecting and buying V-TAC product. V-TAC will serve you the best. Please read these instructions

carefully before starting the installation and keep this manual handy for future reference. If you have any another

query, please contact our dealer or local vendor from whom you have purchased the product. They are trained

and ready to serve you at the best. The warranty is valid for 5 years from the date of purchase. The warranty

does not apply to damage caused by incorrect installation or abnormal wear and tear. The company gives no

warranty against damage to any surface due to incorrect removal and installation of the product.

V-TAC LED

RANGE (UPTO 600W)

COMPATIBLE WITH

This marking indicates that this

product should not be disposed

of with other household wastes.

Caution, risk of electric shock.

INSTALLATION

HEIGHT 2-4m

CUTOUT SIZE Ø63x66mm

DIMENSION Ø76x66.2 mm

+LED

FUNCTION

1. Can identify day and night: It can work in the daytime and at night when it is adjusted on the

“sun” position (max). It can work in the ambient light less than 3LUX when it is adjusted on the

“3” position (min). As for the adjustment pattern, please refer to the testing pattern.

2. It detects human breathing and keeps lamp on continuously, When you stand in the place less

than 3m to the sensor.

3. When you walk to the place 3-4.5m to the sensor, it detects human motion and turn on the

lamp and then turn o aer the setted time if there is no movement during the lighting time.

4. Time-Delay is added continually: When it receives the second induction signals within the ﬁrst

induction, it will restart to time from the moment.

5. Time–Delay is adjustable. It can be set according to the consumer’s desire. The minimum time

is 10sec±3sec. The maximum is 12min±1min.

WIRING DIAGRAM

SENSOR INFORMATION

INSTALLATION

• Switch o the power and unload the transparent cover.

• Connect the power to connection terminal of sensor according to connection-wire diagram.

• Install back the transparent cover into the original location.

• Fold the metal spring of the sensor upwards and then put the sensor into the suitable hole or

installation box. Releasing the spring, the sensor will be set in this installation position.

• Aer ﬁnishing installing, turn on the power and then test it.

WARNING

1. Please make sure to turn o the power before starting the installation.

2. Installation must be performed by a qualiﬁed electrician.

1. Turn the LUX knob clockwise on the maximum (sun). Turn the TIME knob anti-clockwise on the

minimum (10s).

2. When you switch on the power, the light will be on at once. And 10sec±3sec later the light will

be o automatically. Then if the sensor receives induction signal again, it can work normally.

3. When you walk to the place less than 3m to the sensor, it detects human breathing and keeps

lamp on. When you walk to the place more than 3m and then the lamp will be o aer the set-

ted time if there is no another movement.

4. When you walk to the place 3-4.5m to the sensor, it detects human motion and turn on the

lamp as the setted time.

5. When the sensor receives the second induction signals within the ﬁrst induction, it will restart to

time from the moment.

6. Turn LUX knob anti-clockwise on the minimum (3). If the ambient light is less than 3LUX (dark-

ness), the inductor load could work when it receives induction signal.

• Electrician or experienced human can install it.

• Can not be installed on the uneven and shaky surface.

• In front of the sensor there shouldn’t be obstructive object aecting detection.

• Avoid installing it near the metal and glass which may aect the sensor.

• For your safety, please don’t open the case if you ﬁnd hitch aer installation.

TEST

NOTES

• The load don’t work:

a. Check the power and the load.

b. Whether the indicator light is turned on aer sensing? If yes, please check load.

c. If the indicator light does not turn on aer sensing, please check if the working light corresponds

to the ambient light.

d. Please check if the working voltage corresponds to the power source.

• The sensitivity is poor:

a. Please check the ambient temperature.

b. Please check if the signals source is in the detection ﬁelds.

c. Please check the installation height.

• The sensor can’t shut automatically the load:

a. If there are continual signals in the detection ﬁelds.

b. If the time delay is set to the longest.

c. If the power corresponds to the instruction.

Note: when testing in daylight, please turn LUX knob to (SUN) position, otherwise the ☼

sensor lamp could not work!

TROUBLESHOOTING

Specyfikacje produktu

Marka:	V-TAC
Kategoria:	detektor ruchu
Model:	VT-81013

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z V-TAC VT-81013, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą

Twoje imię*

Twój email*

Napisz tutaj swoje pytanie

Instrukcje detektor ruchu V-TAC

V-TAC VT-8092 Instrukcja

8 Października 2024

V-TAC VT-8091 Instrukcja

8 Października 2024

V-TAC VT-81014 Instrukcja

8 Października 2024

V-TAC VT-81013 Instrukcja

8 Października 2024

V-TAC VT-81012 Instrukcja

8 Października 2024

V-TAC VT-81011 Instrukcja

8 Października 2024

V-TAC VT-81010 Instrukcja

8 Października 2024

V-TAC VT-81009 Instrukcja

8 Października 2024

V-TAC VT-81007 Instrukcja

8 Października 2024

V-TAC VT-80360 Instrukcja

8 Października 2024

Instrukcje detektor ruchu

Najnowsze instrukcje dla detektor ruchu

Maxsa 40234 Instrukcja

9 Października 2024

Maxsa 43218 Instrukcja

9 Października 2024

ORNO OR-CR-233 Instrukcja

9 Października 2024

ORNO OR-CR-219 Instrukcja

9 Października 2024

ORNO OR-CR-232 Instrukcja

9 Października 2024

ORNO OR-CR-231 Instrukcja

9 Października 2024

JUNG BTLC17181244 Instrukcja

8 Października 2024

JUNG BTLC17182250 Instrukcja

8 Października 2024

JUNG BTLC17181255 Instrukcja

8 Października 2024

JUNG BTLC17182259 Instrukcja

8 Października 2024