Instrukcja obsługi TP-Link Omada Pro AP7650

TP-Link Punkt dostępu Omada Pro AP7650

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla TP-Link Omada Pro AP7650 (8 stron) w kategorii Punkt dostępu. Ta instrukcja była pomocna dla 2 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/8
Regulatory Compliance
Wall Plate AP
For Class B AP with no adapter:
FCC Compliance Information Statement
Product Name: Omada AP
Model Number: AP7650
Responsible party:
TP-Link USA Corporation
Address: 10 Mauchly, Irvine, CA 92618
Website: https://www.tp-link.com/us/
Tel: +1 626 333 0234
Fax: +1 909 527 6804
E-mail: sales.usa@tp-link.com
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates, uses and can
radiate radio frequency energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the equipment
off and on, the user is encouraged to try to correct the interference by one or more of the
following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
• Consult the dealer or an experienced radio/ TV technician for help.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two
conditions:
1) This device may not cause harmful interference.
2) This device must accept any interference received, including interference that may cause
undesired operation.
Any changes or modifications not expressly approved by the party responsible for compliance
could void the user’s authority to operate the equipment.
Note: The manufacturer is not responsible for any radio or TV inter ference caused by
unauthorized modifications to this equipment. Such modifications could void the user’s authority
to operate the equipment.
FCC RF Radiation Exposure Statement:
This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled
environment. This device and its antenna must not be co-located or operating in conjunction with
any other antenna or transmitter.
“To comply with FCC RF exposure compliance requirements, this grant is applicable to only Mobile
Configurations. The antennas used for this transmitter must be installed to provide a separation
distance of at least 20cm from all persons and must not be colocated or operating in conjunction
with any other antenna or transmitter.”
We, TP-Link USA Corporation, has determined that the equipment shown as above has been
shown to comply with the applicable technical standards, FCC part 15. There is no unauthorized
change is made in the equipment and the equipment is properly maintained and operated.
Issue Date: 2023-03-17
CE Mark Warning
This is a class B product. In a domestic environment, this product may cause radio interference, in
which case the user may be required to take adequate measures.
Frequency band: 5150 - 5250 MHz:
Indoor use: Inside buildings only. Installations and use inside road vehicles and train carriages
are not permitted. Limited outdoor use: If used outdoors, equipment shall not be attached to a
fixed installation or to the external body of road vehicles, a fixed infrastructure or a fixed outdoor
antenna. Use by unmanned aircraft systems (UAS) is limited to within the 5170 - 5250 MHz band.
Frequency band: 5250 - 5350 MHz:
Indoor use: Inside buildings only. Installations and use in road vehicles, trains and aircraft are not
permitted. Outdoor use is not permitted.
Frequency band: 5470 - 5725 MHz:
Installations and use in road vehicles, trains and aircraft and use for unmanned aircraft systems
(UAS) are not permitted.
OPERATING FREQUENCY (the maximum transmitted power)
2412MHz—2472MHz(20dBm)
5150MHz—5250MHz(23dBm)
5250 MHz -5350 MHz (23dBm)

Specyfikacje produktu

Marka: TP-Link
Kategoria: Punkt dostępu
Model: Omada Pro AP7650

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z TP-Link Omada Pro AP7650, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje Punkt dostępu TP-Link

TP-Link

TP-Link Festa F65-Wall Instrukcja

9 Października 2024
TP-Link

TP-Link Festa F65 Instrukcja

5 Października 2024
TP-Link

TP-Link TL-WPA1000 Instrukcja

3 Października 2024
TP-Link

TP-Link Omada EAP773 Instrukcja

3 Października 2024
TP-Link

TP-Link EAP110-Outdoor V3 Instrukcja

1 Października 2024
TP-Link

TP-Link TL-WA1801 Instrukcja

28 Września 2024
TP-Link

TP-Link Omada EAP610-Outdoor Instrukcja

28 Września 2024
TP-Link

TP-Link Omada Pro AP7650 Instrukcja

27 Września 2024
TP-Link

TP-Link Omada Pro AP9650 Instrukcja

25 Września 2024
TP-Link

TP-Link Omada Pro AP9635 Instrukcja

25 Września 2024

Instrukcje Punkt dostępu

Najnowsze instrukcje dla Punkt dostępu

Cisco

Cisco MR12 Instrukcja

14 Października 2024
Draytek

Draytek VigorAP 920R Instrukcja

13 Października 2024
Netgear

Netgear WNDAP360 Instrukcja

12 Października 2024
D-Link

D-Link DWL-1000AP+ Instrukcja

9 Października 2024
D-Link

D-Link DWL-700AP Instrukcja

9 Października 2024
Cambium Networks

Cambium Networks cnPilot e505 Instrukcja

9 Października 2024
Cambium Networks

Cambium Networks cnPilot e425H Instrukcja

9 Października 2024
Cambium Networks

Cambium Networks cnPilot e600 Instrukcja

9 Października 2024
Cambium Networks

Cambium Networks cnPilot e510 Instrukcja

9 Października 2024
Cambium Networks

Cambium Networks cnPilot e502S Instrukcja

9 Października 2024