Instrukcja obsługi Thone TW2

Thone Zatyczka do uszu TW2

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Thone TW2 (4 stron) w kategorii Zatyczka do uszu. Ta instrukcja była pomocna dla 5 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/4
user manual TW2
Pairing mode
Take out both earphones from the charging box (the earphone which
comes out rst from the charging box will be the master device). They
will turn on automatically with the voice prompts “Power on”, then both
earphones are linked with the voice prompt “connected”. The master
device goes into pairing mode and blinks in red and blue colors.
Connect with your device
Open the bluetooth menu of your device and search for the earphones
with pairing name TW2. Click the pairing name “TW2” to connect
with your phone. It wil conrm the connection with the voice prompts
“pairing successful”. The leds on both earphones stop blinking.
Connection nished
When nished, you can put the earphones back in the box, they will
then turn o automatically.
Reconnection
When you take out one or two earphones from the charging box and
the Bluetooth of your phone is turned on, it or they will reconnect
automatically to the device it used the last time.
Pairing & Connection
There is a muti-function button (MFB) on each earphone.
When playing music, click on a MFB to pause/play the song, double
click the right side MFB to play the next track, double click the left side
MFB to go back to the prevoius track.
If you receive a call while playing music, the music will be paused.
Click on either side of the earphones’ MFB to answer the phone call,
double-click to reject the call. While calling, single click a MFB to end
the phone call.
Press and hold the MFB on either side for two seconds to use your
device’s virtual assistant by voice (such as Siri, Google Now, etc).
Press and hold the MFB for four seconds until you hear two
‘beep’ tones and the words “power o”. The other earphones will
automatically turn o too. If you don’t put the earphones back into the
charging box, you need to press and hold the MFB for four seconds
on both sides to turn them back on again. This will be confrmed by the
voice prompt “power on”.
Control
True Wireless
Earphones
Thone
Abel Veldhoven B.V.
Het Groen 1B
5511 AC Knegsel
The Netherlands
www.Thone.pro
info@Thone.pro
True Wireless Two
Dutch Design, Assembled in China
next track
2x
pr ackevious tr
2x
volume dow volume upn
reject call
vi ual assistant power on / offrt
2x
2s 4s
play / pause
answer / end call
Skin irritation
Earphones can lead to ear infections if not properly cleaned. Clean
the earphones regularly with a soft lint-free cloth. Don’t get moisture in
any openings, or use aerosol sprays, solvents, or abrasives. If a skin
problem develops, discontinue use. If the problem persists, consult
a physician.
Hearing loss
Listening to sound at high volumes may permanently damage your
hearing. Background noise, as well as continued exposure to high
volume levels, can make sounds seem quieter than they actually are.
Check the volume after inserting the earphones in your ear and before
playing audio.
WARNING: To prevent possible hearing damage, do not listen at high
volume levels for long periods.
Safety and handling
Driving hazard
Usage while operating a vehicle is not recommended and is illegal
in some areas. Check and obey the applicable laws and regulations
on the use of earphones while operating a vehicle. Be careful and
attentive while driving. Stop listening to your audio device if you
nd it disruptive or distracting while operating any type of vehicle or
performing any activity that requires your full attention.
Handle with care
Handle the earphones and case with care. They contain sensitive
electronic components, including batteries, and can be damaged,
impair functionality, or cause injury if dropped, burned, punctured,
crushed, disassembled, or if exposed to excessive heat or liquid or
to environments having high concentrations of industrial chemicals,
including near evaporating liquied gasses such as helium. Don’t use
damaged damaged products.
Choking hazard
The earphones, the case, and small parts included with in the
packaging may present a choking hazard or cause other injury to small
children. Keep them away from small children.
Batteries
Don’t attempt to replace earphone or case batteries yourself, you may
damage the batteries, which could cause overheating and injury.
Charging
Charge the case with the charging cable and a power adapter
or computer. Only charge with an adapter that is compliant with
applicable country regulations and international and regional safety
standards, including the International Standard for Safety of Information
Technology Equipment (IEC 60950-1). Other adapters may not meet
applicable safety standards, and charging with such adapters could
pose a risk of death or injury. Using damaged cables or chargers, or
charging when moisture is present, can cause re, electric shock,
injury, or damage to the case or other property.
Prolonged heat exposure
Avoid prolonged skin contact with a device, its power adapter, the
charging cable and connector, or a wireless charger when plugged
into a power source, because it may cause discomfort or injury. For
example, while the case is charging using the charging cable and a
power adapter plugged into a power source, don’t sit or sleep on the
case, charging cable, connector or power adapter, or place them
under a blanket, pillow, or your body. Take special care if you have
a physical condition that aects your ability to detect heat against
your body.
Electrostatic shock
When using the earphones in areas where the air is very dry, it is easy
to build up static electricity and possible for your ears to receive a
small electrostatic discharge from the earphones. To minimize the risk
of electrostatic discharge, avoid using the earphones in extremely dry
environments, or touch a grounded unpainted metal object before
inserting the earphones.
Medical device interference
The earphones and case contain components and radios that
emit electromagnetic elds. The earphones and case also contain
magnets. These electromagnetic elds and magnets may interfere
with pacemakers, debrillators, or other medical devices. Maintain
a safe distance of separation between your medical device and the
earphones and case. Consult your physician and medical device
manufacturer for information specic to your medical device. Stop
using the earphones and case if you suspect they are interfering with
your pacemaker, debrillator, or any other medical device.
Contact
In case of complaints, please contact us at info@thone.pro
The led indicators on the earphones are red when they are charging in
the charging box, and o when they are fully charged.
When you take out the earphones from the charging box and the led
indicator of the charging box blinks once, it means the charging box
is low on power. In order to fully recharge the earphones after using
them, you should recharge the box.
As soon as you put the earphones into charging box, they turn o
automatically and start charging.
Charging status display
The charging box led displays the power status while charging
0%-25% Blinks once every two seconds
25%-50% Blinks twice every two seconds
50%-75% Blinks three times every two seconds
75%-100% Blinks four times every two seconds
Fully Charged Stays on
This function can be used when the earphones have pairing issues.
When the earphones are turned o, hold the MFB for ten seconds
on both left and right earphones until you hear a ve tone tune. The
earphones’ led indicators flash in red and blue slowly.
Delete paired device function
Hold both buttons down until you hear “Power o”.
Delete paired device from the earphones, please refer to step:
”Delete paired device function”
Pair and connect to your phone again, please refer to step:
”Pairing & Connection”
If the earphones do not connect
Pair name:TW2
Pair Password: 0000
IOS7.0, Android5.0 and above display the remaining battery power
Earphone prompts:
Power on
Pairing
Connected
Pairing successful
Low battery
Power o
Incomming call
Call rejected
Earphones working status and prompts

Specyfikacje produktu

Marka: Thone
Kategoria: Zatyczka do uszu
Model: TW2

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Thone TW2, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje Zatyczka do uszu Thone

Thone

Thone NC1 Instrukcja

21 Września 2024
Thone

Thone TW2 Instrukcja

16 Września 2024

Instrukcje Zatyczka do uszu

Najnowsze instrukcje dla Zatyczka do uszu

SilverCrest

SilverCrest SKG 16 A1 Instrukcja

12 Października 2024
Maxell

Maxell Dual Driver Instrukcja

9 Października 2024
Soundcore

Soundcore Sleep A20 Instrukcja

9 Października 2024
SBS

SBS Mood Instrukcja

9 Października 2024
SBS

SBS Go Pods Instrukcja

9 Października 2024
Vorago

Vorago ESB-305 Instrukcja

9 Października 2024
Vorago

Vorago EP-104 Instrukcja

9 Października 2024
VXi

VXi Reveal Pro Office Instrukcja

9 Października 2024
VXi

VXi BlueParrott Reveal Instrukcja

9 Października 2024
VXi

VXi V200 Instrukcja

9 Października 2024