Instrukcja obsługi Supermicro X9DRD-iT+
Supermicro
Płyty główne
X9DRD-iT+
Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Supermicro X9DRD-iT+ (121 stron) w kategorii Płyty główne. Ta instrukcja była pomocna dla 14 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek
Strona 1/121
USER’S MANUAL
Revision 1.0
X9DRD-iT+
X9DRD-CT+
X9DRD-CNT+
Manual Revision 1.0
Release Date: June 24, 2014
Unless you request and receive written permission from Super Micro Computer, Inc., you may not
copy any part of this document.
Information in this document is subject to change without notice. Other products and companies
referred to herein are trademarks or registered trademarks of their respective companies or mark
holders.
Copyright © 2014 by Super Micro Computer, Inc.
All rights reserved.
Printed in the United States of America
The information in this user’s manual has been carefully reviewed and is believed to be accurate.
The vendor assumes no responsibility for any inaccuracies that may be contained in this document,
and makes no commitment to update or to keep current the information in this manual, or to notify
any person or organization of the updates. Please Note: For the most up-to-date version of this
manual, please see our website at www.supermicro.com.
Super Micro Computer, Inc. ("Supermicro") reserves the right to make changes to the product
described in this manual at any time and without notice. This product, including software and docu-
mentation, is the property of Supermicro and/or its licensors, and is supplied only under a license.
Any use or reproduction of this product is not allowed, except as expressly permitted by the terms
of said license.
IN NO EVENT WILL SUPER MICRO COMPUTER, INC. BE LIABLE FOR DIRECT, INDIRECT,
SPECIAL, INCIDENTAL, SPECULATIVE OR CONSEQUENTIAL DAMAGES ARISING FROM THE
USE OR INABILITY TO USE THIS PRODUCT OR DOCUMENTATION, EVEN IF ADVISED OF
THE POSSIBILITY OF SUCH DAMAGES. IN PARTICULAR, SUPER MICRO COMPUTER, INC.
SHALL NOT HAVE LIABILITY FOR ANY HARDWARE, SOFTWARE, OR DATA STORED OR USED
WITH THE PRODUCT, INCLUDING THE COSTS OF REPAIRING, REPLACING, INTEGRATING,
INSTALLING OR RECOVERING SUCH HARDWARE, SOFTWARE, OR DATA.
Any disputes arising between the manufacturer and the customer shall be governed by the laws of
Santa Clara County in the State of California, USA. The State of California, County of Santa Clara
shall be the exclusive venue for the resolution of any such disputes. Supermicro's total liability for
all claims will not exceed the price paid for the hardware product.
FCC Statement: This equipment has been tested and found to comply with the limits for a Class
A digital device pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference when the equipment is operated in a commercial
environment. This equipment generates, uses, and can radiate radio frequency energy and, if not
installed and used in accordance with the manufacturer’s instruction manual, may cause harmful
interference with radio communications. Operation of this equipment in a residential area is likely
to cause harmful interference, in which case you will be required to correct the interference at your
own expense.
California Best Management Practices Regulations for Perchlorate Materials: This Perchlorate
warning applies only to products containing CR (Manganese Dioxide) Lithium coin cells. “Perchlorate
Material-special handling may apply. See www.dtsc.ca.gov/hazardouswaste/perchlorate”.
WARNING: Handling of lead solder materials used in this
product may expose you to lead, a chemical known to
the State of California to cause birth defects and other
reproductive harm.
Preface
This manual is written for system integrators, IT professionals, and
knowledgeable end-users. It provides information for the installation and use of the
X9DRD-iT+/-CT+/-CNT+ motherboard.
About This Motherboard
The Super X9DRD-iT+/-CT+/-CNT+ motherboard supports dual Intel E5-2600(v2)
Series Processors (Socket R LGA 2011) that offer QPI (Intel QuickPath Interface)
Technology, providing point-to-point connections with a transfer speed of up to 8.0
TG/s. With the C602 built in, the X9DRD-iT+/-CT+/-CNT+ motherboard supports
Intel® Management Engine (ME), Rapid Storage Technology, Digital Media Interface
(DMI), PCI-E Gen. 3.0 and up to 1866 MHz DDR3 memory. This motherboard is
ideal for high-performance WIO server platforms optimized for Virtualization, Big
Data and Enterprise applications. Please refer to our website (http://www.supermi-
cro.com) for CPU and memory support updates.
Manual Organization
Chapter 1 describes the features, specications and performance of the mother-
board. It also provides detailed information about the Intel C602 chipset.
Chapter 2 provides hardware installation instructions. Read this chapter when in-
stalling the processor, memory modules and other hardware components into the
system. If you encounter any problems, see , which describes troubleChapter 3 -
shooting procedures for video, memory, and system setup stored in the CMOS.
Chapter 4 includes an introduction to BIOS, and provides detailed information on
running the CMOS setup utility.
Appendix A provides BIOS Error Beep Codes.
Appendix B lists Software Installation Instructions.
Appendix C contains UEFI BIOS Recovery instructions.
Preface
iii
Specyfikacje produktu
| Marka: | Supermicro |
| Kategoria: | Płyty główne |
| Model: | X9DRD-iT+ |
Potrzebujesz pomocy?
Jeśli potrzebujesz pomocy z Supermicro X9DRD-iT+, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą
Instrukcje Płyty główne Supermicro
9 Sierpnia 2024
9 Sierpnia 2024
6 Lipca 2024
6 Lipca 2024
6 Lipca 2024
6 Lipca 2024
5 Lipca 2024
5 Lipca 2024
4 Lipca 2024
4 Lipca 2024
Instrukcje Płyty główne
Najnowsze instrukcje dla Płyty główne
8 Października 2024
9 Sierpnia 2024
9 Sierpnia 2024
6 Lipca 2024
5 Lipca 2024
4 Lipca 2024
4 Lipca 2024
4 Lipca 2024
4 Lipca 2024
3 Lipca 2024