Instrukcja obsługi Supermicro P6DNH
Supermicro
Płyty główne
P6DNH
Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Supermicro P6DNH (44 stron) w kategorii Płyty główne. Ta instrukcja była pomocna dla 13 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek
Strona 1/44
®
SUPER
Dual Pentium Pro Processor
SUPER P6DNH
SUPER P6DNH2
USER’S MANUAL
Revision 1.1
®
The information in this User’s Manual has been carefully reviewed and is believed to be
accurate. The vendor assumes no responsibility for any inaccuracies that may be
contained in this document, makes no commitment to update or to keep current the
information in this manual, or to notify any person or organization of the updates.
SUPERMICRO COMPUTER reserves the right to make changes to the product described in
this manual at any time and without notice. This product, including software, if any, and
documentation may not, in whole or in part, be copied, photocopied, reproduced, translated
or reduced to any medium or machine without prior written consent.
IN NO EVENT WILL SUPERMICRO COMPUTER BE LIABLE FOR DIRECT, INDIRECT,
SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES ARISING FROM THE USE OR
INABILITY TO USE THIS PRODUCT OR DOCUMENTATION, EVEN IF ADVISED OF THE
POSSIBILITY OF SUCH DAMAGES. IN PARTICULAR, THE VENDOR SHALL NOT HAVE
LIABILITY FOR ANY HARDWARE, SOFTWARE, OR DATA STORED OR USED WITH THE
PRODUCT, INCLUDING THE COSTS OF THE REPAIRI NG, RE PLA CI NG, OR
RECOVERING SUCH HARDWARE, SOFTWARE, OR DATA.
Unless you request and receive written permission from SUPERMICRO COMPUTER, you
may not copy any part of this document.
Information in this document is subject to change without notice. Other products and
companies referred to herein are trademarks or registered trademarks of their respective
companies or mark holders.
Copyright © 1997 by SUPERMICRO COMPUTER INC.
All rights reserved.
Printed in the United States of America.
i i i
Preface
About This Manual
This manual is written for system houses, PC technicians and
knowledgeable PC end users. It provides information for the instal-
lation and use of the SUPER® P6DNH/P6DNH2 motherboard, which
supports the 200/180/166/150, >200 MHz Intel® Pentium® Pro pro-
cessors, and the i960® RP IO processor.
The Pentium Pro processor has two 64-bit data buses. One bus
interconnects to the built-in L2 cache and the other is an external
bus that interconnects with the system memory, I/O and the other
processor. Both come with ECC (Error Checking and Correction)
allowing for the correction of single-bit data errors and detection of
2-bit errors on the data bus.
Manual Organization
Chapter 1, Introduction, describes the features, specifications and
performance of the SUPER P6DNH/P6DNH2 system board, pro-
vides detailed information about the chipset, and offers warranty
information.
Refer to Chapter 2, Installation, for a list of the equipment needed
for a system based on the SUPER P6DNH/P6DNH2 system board.
This chapter provides you with the instructions for handling static-
sensitive devices, checking and/or configuring the jumpers. Read
this chapter when you want to install or remove SIMM memory mod-
ules and to mount the system board in the chassis. Also refer to
this chapter to connect the floppy and hard disk drives, USB, IDE
interface, parallel port, serial ports, as well as the cables for the
power supply, reset cable, Keylock/Power LED, speaker and key-
board.
Specyfikacje produktu
| Marka: | Supermicro |
| Kategoria: | Płyty główne |
| Model: | P6DNH |
Potrzebujesz pomocy?
Jeśli potrzebujesz pomocy z Supermicro P6DNH, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą
Instrukcje Płyty główne Supermicro
9 Sierpnia 2024
9 Sierpnia 2024
6 Lipca 2024
6 Lipca 2024
6 Lipca 2024
6 Lipca 2024
5 Lipca 2024
5 Lipca 2024
4 Lipca 2024
4 Lipca 2024
Instrukcje Płyty główne
Najnowsze instrukcje dla Płyty główne
8 Października 2024
9 Sierpnia 2024
9 Sierpnia 2024
6 Lipca 2024
5 Lipca 2024
4 Lipca 2024
4 Lipca 2024
4 Lipca 2024
4 Lipca 2024
3 Lipca 2024