Instrukcja obsługi Supermicro H11SSL-I

Supermicro Płyty główne H11SSL-I

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Supermicro H11SSL-I (96 stron) w kategorii Płyty główne. Ta instrukcja była pomocna dla 6 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF

Strona 1/96

USER’S MANUAL

Revision 1.0a

H11SSL-I/C/NC

The information in this User’s Manual has been carefully reviewed and is believed to be accurate. The vendor assumes

no responsibility for any inaccuracies that may be contained in this document, and makes no commitment to update

or to keep current the information in this manual, or to notify any person or organization of the updates. Please Note:

For the most up-to-date version of this manual, please see our website at www.supermicro.com.

Super Micro Computer, Inc. ("Supermicro") reserves the right to make changes to the product described in this manual

at any time and without notice. This product, including software and documentation, is the property of Supermicro and/

or its licensors, and is supplied only under a license. Any use or reproduction of this product is not allowed, except

as expressly permitted by the terms of said license.

IN NO EVENT WILL Super Micro Computer, Inc. BE LIABLE FOR DIRECT, INDIRECT, SPECIAL, INCIDENTAL,

SPECULATIVE OR CONSEQUENTIAL DAMAGES ARISING FROM THE USE OR INABILITY TO USE THIS PRODUCT

OR DOCUMENTATION, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. IN PARTICULAR, SUPER

MICRO COMPUTER, INC. SHALL NOT HAVE LIABILITY FOR ANY HARDWARE, SOFTWARE, OR DATA STORED

OR USED WITH THE PRODUCT, INCLUDING THE COSTS OF REPAIRING, REPLACING, INTEGRATING,

INSTALLING OR RECOVERING SUCH HARDWARE, SOFTWARE, OR DATA.

Any disputes arising between manufacturer and customer shall be governed by the laws of Santa Clara County in the

State of California, USA. The State of California, County of Santa Clara shall be the exclusive venue for the resolution

of any such disputes. Supermicro's total liability for all claims will not exceed the price paid for the hardware product.

FCC Statement: This equipment has been tested and found to comply with the limits for a Class A digital device

pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful

interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can

radiate radio frequency energy and, if not installed and used in accordance with the manufacturer’s instruction manual,

may cause harmful interference with radio communications. Operation of this equipment in a residential area is likely

to cause harmful interference, in which case you will be required to correct the interference at your own expense.

California Best Management Practices Regulations for Perchlorate Materials: This Perchlorate warning applies only

to products containing CR (Manganese Dioxide) Lithium coin cells. “Perchlorate Material-special handling may apply.

See ”.www.dtsc.ca.gov/hazardouswaste/perchlorate

WARNING: Handling of lead solder materials used in this product may expose you to lead, a

chemical known to the State of California to cause birth defects and other reproductive harm.

The products sold by Supermicro are not intended for and will not be used in life support systems, medical equipment,

nuclear facilities or systems, aircraft, aircraft devices, aircraft/emergency communication devices or other critical

systems whose failure to perform be reasonably expected to result in signicant injury or loss of life or catastrophic

property damage. Accordingly, Supermicro disclaims any and all liability, and should buyer use or sell such products

for use in such ultra-hazardous applications, it does so entirely at its own risk. Furthermore, buyer agrees to fully

indemnify, defend and hold Supermicro harmless for and against any and all claims, demands, actions, litigation, and

proceedings of any kind arising out of or related to such ultra-hazardous use or sale.

Manual Revision 1.0a

Release Date: March 09, 2018

Unless you request and receive written permission from Super Micro Computer, Inc., you may not copy any part of this

document. Information in this document is subject to change without notice. Other products and companies referred

to herein are trademarks or registered trademarks of their respective companies or mark holders.

Printed in the United States of America

Preface

About This Manual

This manual is written for system integrators, IT technicians and knowledgeable end users.

It provides information for the installation and use of the H11SSL-I/C/NC motherboard.

About This Motherboard

Built upon the functionality and capability of the EPYC 7000 series processor, the

H11SSL-I/C/NC motherboard provides superior graphics capability and system performance

while consuming little power. Please note that this motherboard is intended to be installed

and serviced by professional technicians only. For processor/memory updates, please refer

to our website at http://www.supermicro.com/products/.

Conventions Used in the Manual

Special attention should be given to the following symbols for proper installation and to prevent

damage done to the components or injury to yourself:

Warning! Indicates high voltage may be encountered when performing a procedure.

Warning! Indicates important information given to prevent equipment/property damage

or personal injury.

Specyfikacje produktu

Marka:	Supermicro
Kategoria:	Płyty główne
Model:	H11SSL-I
Szerokość produktu:	305 mm
Głębokość produktu:	244 mm
Przeznaczenie:	Serwer
Ilość portów Ethernet LAN (RJ-45):	2
Zakres temperatur (eksploatacja):	10 - 35 °C
Zakres wilgotności względnej:	8 - 90 %
Wi-Fi:	Nie
Kod zharmonizowanego systemu (HS):	84733020
Liczba portów USB 2.0:	2
Przewodowa sieć LAN:	Tak
Zakres temperatur (przechowywanie):	-40 - 70 °C
Dopuszczalna wilgotność względna:	5 - 95 %
Producent procesora:	AMD
Ilość portów USB 3.2 Gen 1 (3.1 Gen 1) Typu-A:	2
Obsługiwane rodzaje pamięci:	DDR4-SDRAM
Obsługiwane prędkości zegara pamięci:	2666 MHz
Maksymalna pojemność pamięci:	1024 GB
Obsługa kanałów pamięci:	Ośmiokanałowy
Gniazdo procesora:	Socket SP3
Procesor:	AMD EPYC
Rodzaj płyty:	ATX
Typ BIOS:	AMI
Liczba gniazd M.2 (M):	1
Ilość złączy SATA III:	12
Ilość gniazd USB 2.0:	3
Łącza USB 3.2 Gen 1 (3.1 Gen 1):	2
Złącze TPM:	Tak
Gniazda PCI Express x16 (Gen 3.x):	3
Wspierane interfejsy dysków twardych:	SATA III
Rodzaj interfejsu sieci Ethernet:	Gigabit Ethernet
Kontroler LAN:	Intel I210, Realtek RTL8211E
Liczba portów VGA (D-Sub):	1
Dołączone oprogramowanie:	Super Doctor 5\nWatch Dog\nNMI\nSUM\nIPMI 2.0, KVM w/ dedicated LAN
Obsługa funkcji Plug & Play:	Tak
Korekcja ECC:	Tak
Rozmiar pamięci BIOS:	128 Mbit
Wersja ACPI:	5.1
Moduł TPM (Trusted Platform Module):	Tak
Wersja TPM:	1.2
Model karty graficznej on-board:	Aspeed AST2500
Gniazda PCI Express x8 (Gen 3.x):	3
Napięcie pamięci:	1.2 V
Ilość slotów DIMM:	8
Liczba obsługiwanych procesorów:	1
Ilość portów COM:	1
Obsługuje rozmiary DIMM:	8GB, 16GB, 32GB, 64GB, 128MB
Port IPMI LAN (RJ-45):	Tak