Instrukcja obsługi Supermicro X10DRL-CT

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Supermicro X10DRL-CT (119 stron) w kategorii Moederborden. Ta instrukcja była pomocna dla 10 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/119
USER’S MANUAL
Revision 1.0c
X10DRL-CT
X10DRL-iT
X10DRL-C
Manual Revision 1.0c
Release Date: November 21, 2016
Unless you request and receive written permission from Super Micro Computer, Inc., you may not
copy any part of this document.
Information in this document is subject to change without notice. Other products and companies
referred to herein are trademarks or registered trademarks of their respective companies or mark
holders.
Copyright © 2016 by Super Micro Computer, Inc.
All rights reserved.
Printed in the United States of America
The information in this User’s Manual has been carefully reviewed and is believed to be accurate.
The vendor assumes no responsibility for any inaccuracies that may be contained in this document,
and makes no commitment to update or to keep current the information in this manual, or to notify
any person or organization of the updates. Please Note: For the most up-to-date version of this
manual, please see our website at www.supermicro.com.
Super Micro Computer, Inc. ("Supermicro") reserves the right to make changes to the product
described in this manual at any time and without notice. This product, including software and docu-
mentation, is the property of Supermicro and/or its licensors, and is supplied only under a license.
Any use or reproduction of this product is not allowed, except as expressly permitted by the terms
of said license.
IN NO EVENT WILL SUPER MICRO COMPUTER, INC. BE LIABLE FOR DIRECT, INDIRECT,
SPECIAL, INCIDENTAL, SPECULATIVE OR CONSEQUENTIAL DAMAGES ARISING FROM THE
USE OR INABILITY TO USE THIS PRODUCT OR DOCUMENTATION, EVEN IF ADVISED OF
THE POSSIBILITY OF SUCH DAMAGES. IN PARTICULAR, SUPER MICRO COMPUTER, INC.
SHALL NOT HAVE LIABILITY FOR ANY HARDWARE, SOFTWARE, OR DATA STORED OR USED
WITH THE PRODUCT, INCLUDING THE COSTS OF REPAIRING, REPLACING, INTEGRATING,
INSTALLING OR RECOVERING SUCH HARDWARE, SOFTWARE, OR DATA.
Any disputes arising between the manufacturer and the customer shall be governed by the laws of
Santa Clara County in the State of California, USA. The State of California, County of Santa Clara
shall be the exclusive venue for the resolution of any such disputes. Supermicro's total liability for
all claims will not exceed the price paid for the hardware product.
FCC Statement: This equipment has been tested and found to comply with the limits for a Class
A digital device pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference when the equipment is operated in a commercial
environment. This equipment generates, uses, and can radiate radio frequency energy and, if not
installed and used in accordance with the manufacturer’s instruction manual, may cause harmful
interference with radio communications. Operation of this equipment in a residential area is likely
to cause harmful interference, in which case you will be required to correct the interference at your
own expense.
California Best Management Practices Regulations for Perchlorate Materials: This Perchlorate
warning applies only to products containing CR (Manganese Dioxide) Lithium coin cells. “Perchlorate
Material-special handling may apply. See www.dtsc.ca.gov/hazardouswaste/perchlorate”.
WARNING: Handling of lead solder materials used in this
product may expose you to lead, a chemical known to
the State of California to cause birth defects and other
reproductive harm.
Preface
This ma n u a l i s written for system integrato rs, IT Professionals, and
knowledgeable PC users. It provides information for the installation and use of the
X10DRL-CT/-iT/-C motherboard.
About This Motherboard
The Super motherboard supports dual Intel E5-2600v3/v4 X10DRL-CT/-iT/-C
Series Processors (Socket R3) that offer new Intel Microarchitecture 22nm (E5-
2600v3)/14nm (E5-2600v4) Process Technology, delivering the best balanced
solution of performance, power efciency, and features to address the diverse needs
of next-generation data centers. With the PCH C612 built in, the X10DRL-CT/-iT/-
C motherboard supports Intel® Management Engine, MCTP Protocol, and Node
Manager 3.0. This motherboard is ideal for cost-optimzed and general-purpose
server platforms. Please refer to our website (http://www.supermicro.com) for CPU
and memory support updates.
Manual Organization
Chapter 1 describes the features, specications and performance of the moth-
erboard. It also provides detailed information about the Intel PCH C612 chipset.
Chapter 2 provides hardware installation instructions. Read this chapter when in-
stalling the processor, memory modules and other hardware components into the
system. If you encounter any problems, see , which describes troubleChapter 3 -
shooting procedures for video, memory, and system setup stored in CMOS.
Chapter 4 includes an introduction to BIOS, and provides detailed information on
running the BIOS Setup utility.
Appendix A provides BIOS Error Beep Codes.
Appendix B lists Software Installation Instructions.
Appendix C contains UEFI BIOS Recovery instructions.
Preface
iii

Specyfikacje produktu

Marka: Supermicro
Kategoria: Moederborden
Model: X10DRL-CT
Szerokość produktu: 304.8 mm
Głębokość produktu: 254 mm
Certyfikat środowiskowy (zrównoważonego rozwoju): RoHS
Ilość portów Ethernet LAN (RJ-45): 4
Zakres temperatur (eksploatacja): 10 - 35 °C
Zakres wilgotności względnej: 8 - 90 %
Wi-Fi: Nie
Przewodowa sieć LAN: Tak
Zakres temperatur (przechowywanie): -40 - 70 °C
Dopuszczalna wilgotność względna: 5 - 95 %
Usługa RAID: Tak
Producent procesora: Intel
Ilość portów USB 3.2 Gen 1 (3.1 Gen 1) Typu-A: 2
Obsługiwane rodzaje pamięci: DDR4-SDRAM
Obsługiwane prędkości zegara pamięci: 1600,1866,2133 MHz
Maksymalna pojemność pamięci: 512 GB
Gniazdo procesora: LGA 2011 (Socket R)
Rodzaj płyty: ATX
Układ płyty głównej: Intel® C612
Poziomy raid: 0, 1,5, 10
Typ BIOS: AMI
Ilość złączy SATA III: 8
Ilość gniazd USB 2.0: 2
Złącze TPM: Tak
Gniazda PCI Express x16 (Gen 3.x): 1
Wspierane interfejsy dysków twardych: SATA III
Rodzaj interfejsu sieci Ethernet: 10 Gigabit Ethernet, Fast Ethernet, Gigabit Ethernet
Kontroler LAN: Intel I210
Liczba portów VGA (D-Sub): 1
Korekcja ECC: Tak
Rozmiar pamięci BIOS: 16 Mbit
Wersja ACPI: 4.0
Moduł TPM (Trusted Platform Module): Tak
Wersja TPM: 1.2
Model karty graficznej on-board: Aspeed AST2400
Gniazda PCI Express x8 (Gen 3.x): 2
Napięcie pamięci: 1.2 V
Intel® Xeon series: E5-2600
Ilość slotów DIMM: 8
Liczba obsługiwanych procesorów: 2
Ilość gniazd COM: 1
Maksymalna pojemność pamięci RDIMM: 256 GB
Moc termalna procesora (maksymalna): 145 W
Maksymalna pamięć LRDIMM: 512 GB
Obsługiwana liczba rdzeni procesora: 18
Port IPMI LAN (RJ-45): Tak
Obsługiwana pojemność modułu RDIMM: 4GB, 8GB, 16GB, 32GB
Obsługiwane QPI: 9.6 GT/s
Obsługiwana pojemność modułu LRDIMM: 32GB, 64GB

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Supermicro X10DRL-CT, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą