Instrukcja obsługi Star Micronics mC-Print2
Star Micronics
drukarka
mC-Print2
Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Star Micronics mC-Print2 (3 stron) w kategorii drukarka. Ta instrukcja była pomocna dla 2 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek
Strona 1/3
Connecting a Tablet or PC to the Printer
Open the smartphone/tablet settings screen and select Bluetooth.
Bluetooth interface
Turn on Bluetooth.
Select the displayed device name (mC-Print2-XXXXX).
When “Connected” is displayed, pairing is completed.
mC-Print2-XXXXXmC-Print2-XXXXX
The device name that is displayed during pairing varies depending
on the product. It can be checked from ***Bluetooth Information***
[Dev Name] in the list that is printed at printer test printing. (For test
printing, turn power ON while holding down the FEED button.)
You will need:
• Commercially-available
LAN cable
Printer-side plug
Connect the LAN cable to the printer LAN connector
.
2
Connect the other plug to the connector of the router, hub, or other
LAN device .
Wired LAN interface
Image of connection
<MCP20B only>
DHCP is enabled by default for the wired LAN settings. To con-
tinually use the same IP address, set a static IP address before
use.
For the static IP address setting procedure, refer to the Online
Manual.
1
Easy Setup Guide
3-A Connecting an iOS terminal to the printer
Installing the Printer
This document explains the procedures for use of mC-Print2. Please store it carefully after reading it.
1 Installing the paper roll
4
5
3
2
1
2 Turning ON the main unit power
1
23
5
4
• MCP20
• MCP20B
www.star-m.jp/mcprint-app.html
mC-Print2 Utility Download
www.star-m.jp/mcprint2-oml.html
mC-Print2 Online Manual
What the utility can do
The utility can be used to change the settings of the printer and peripheral devices.
Examples) • Bluetooth pairing • memory switch changes, logo registration
• Bluetooth settings, LAN settings • Sample printing etc.
• Firmware update/diagnosis
● To use the utility, download it from the site at right.
● To perform setup using this manual, proceed to Step 1.
Introduction
Check the Supplied Accessories If any of the package contents are missing or damaged, contact the dealer where the
product was purchased. * Accessories vary depending on the region where the printer was purchased.
Printer
In Case of Trouble
If you experience trouble with the setup procedure, refer to the Online Manual.
Place the enclosed yer close to the printer and use it when necessary.
Pull the open lever and open the printer cover
.
Take the slack of the paper roll before paper setting, insert the paper roll
as shown in the illustration
.
Pull the end of the paper roll out straight and use both hands to
close the printer cover
.
Press the power button and conrm that the LED (blue) illuminates
.
Connect the the power cable to the AC adapter , and connect the
cable connector to the printer as shown in the illustration
. Insert the
plug into the outlet
.
Paper Roll
Easy
Setup Guide
Safety
Instructions
This Manual
Power Cable*AC Adapter
Flyer
(Q&A reference)
USB Cable*
Copyright © 2018 Star Micronics Co., Ltd. 80877991
Initializing the communication settings (For Bluetooth and Wired LAN Interface)
The operation to activate the setting is dierent
depending on the product model.
For MCP20, press and hold the FEED button .
For MCP20B, press the FEED button and se-
lect the type of communication setting to initial-
ize*, then press and hold the FEED button to
conrm.
*Flashing pattern table
Download the Mac CUPS driver or Linux CUPS driver.
For details, refer to the Online Manual.
4
1
3
2
If the communication connection is not success-
ful, follow the procedure below and initialize the
communication setting.
After initialization, perform connection again
starting from the beginning of 3-A, B, or D.
<Procedure>
Check that the printer power is OFF. Insert a
pen with a small tip or similar item and press the
RESET switch on the back . At the same time,
press the power switch on the front of the printer
until the POWER LED turns on (power ON) .
Keep pressing RESET switch until the Network
LED (green) on the front of the printer ashes .
3-B Connecting an Android terminal to the printer
The device name that is displayed during
pairing varies depending on the product.
It can be checked from ***Bluetooth In-
formation*** [Dev Name] in the list that
is printed at printer test printing. (For test
printing, turn power ON while holding
down the FEED button.)
USB interface
Open the smartphone/tablet Settings - Con-
nection screen an h.
Bluetooth interface
Turn on Bluetooth.
Select the displayed device name (mC-Print2-
XXXXX).
W is displayed
in mpleted.
Connect the USB cable to the printer USB
(Type B) connector .
You will need:
• Prepare a USB cable
a n d U S B a d a p t e r
according to the con-
nector shape of the
smartphone or tablet
that you use.
2
Printer-side plug
(Type B) Connect the LAN cable to the printer LAN
connector .
2
Connect the other plug to the connector of
the router, hub, or other LAN device .
Wired LAN interface
You will need:
• Commercially-available
LAN cable
Printer-side plug
Connect the other plug to the connector of
the smartphone/tablet .
3-C Connecting a Mac/Linux terminal to the printer
DHCP is enabled by default for the
wired LAN settings. To continually use
the same IP address, set a static IP ad-
dress before use.
For the static IP address setting proce-
dure, refer to the Online Manual.
◦ IOS is a trademark or registered trademark of Cisco Systems, Inc. in the United States and other countries, and is used based on a license. Lightning is a trademark of Apple Inc. ◦ Android is a trade-
mark of Google Inc. ◦ Mac is a trademark of Apple Inc. in the USA and other countries. ◦ Windows is a registered trademark of the U.S. Microsoft Corporation in the United States, Japan, and other
countries. ◦ The Bluetooth® word mark and logo are registered trademarks owned by Bluetooth SIG, Inc. ◦ For more details, refer to our company’s FAQ site (http://www.star-m.jp/faq/index.html).
3-D Connecting a Windows tablet or PC terminal to the printer
The device name that is displayed during
pairing varies depending on the product.
It can be checked from ***Bluetooth In-
formation*** [Dev Name] in the list that
is printed at printer test printing. (For test
printing, turn power ON while holding
down the FEED button.)
Connect the USB cable to the printer USB
(Type B) connector .
USB interface
2
Be sure to install the Windows driver be-
fore connecting the USB cable.
Connect the LAN cable to the printer LAN
connector .
Connect the other plug to the connector of
the router, hub, or other LAN device .
Wired LAN interface
You will need:
• Commercially-available
LAN cable
Connect the other plug to the connector of
the Windows tablet/PC .
DHCP is enabled by default for the
wired LAN settings. To continually use
the same IP address, set a static IP
address before use.
For the static IP address setting proce-
dure, refer to the Online Manual.
Open the Settings and select [Devices] -
[Bluetooth & other devices].
Turn on Bluetooth.
Bluetooth interface
After a few m
is unavailable” will be displayed, however
pairing is completed.
or
scanner].
When the device appears in “P
ners”, pairing is completed.
mC-Print2-XXXXXmC-Print2-XXXXX
2
Select the displayed device name (mC-Print2-
XXXXX) and click or tap [Add device].
You will need:
• Prepare a USB cable
and USB adapter ac-
cording to the connec-
tor shape of the tablet
or PC that you use.
Printer-side plug
(Type B)
Windows 10
*For procedures regarding Windows 7, 8, or 8.1,
refer to the Online Manual.
<MCP20B only>
<MCP20B only>
1
1
1
1
Initializing the wired LAN settings
Initializing the Bluetooth settings
Initializing the wired LAN and Bluetooth settings
www.star-m.jp/mac-cps.html
● Download the Mac CUPS driver
www.star-m.jp/linux-cps.html
● Download the Linux CUPS driver
www.star-m.jp/mcprint-wsw.html
Download the StarPRNT for
mCollection Windows driver
Installing the Windows driver
Download [mCollection Printer Software].
Extract the downloaded software and execute “Setup.exe”.
Follow the wizard instructions and complete software installation.
The Windows driver is included in the mCollection Printer Software.
The mCollection Printer Software can be used to congure the printer
settings and perform an operation test.
Printer-side plug
Specyfikacje produktu
| Marka: | Star Micronics |
| Kategoria: | drukarka |
| Model: | mC-Print2 |
Potrzebujesz pomocy?
Jeśli potrzebujesz pomocy z Star Micronics mC-Print2, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą
Instrukcje drukarka Star Micronics
7 Października 2024
7 Października 2024
22 Września 2024
16 Września 2024
15 Września 2024
15 Września 2024
15 Września 2024
14 Września 2024
12 Września 2024
12 Września 2024
Instrukcje drukarka
- drukarka Sony
- drukarka Samsung
- drukarka LG
- drukarka Xiaomi
- drukarka Sharp
- drukarka Lenovo
- drukarka Epson
- drukarka Fujitsu
- drukarka Roland
- drukarka Panasonic
- drukarka StarTech.com
- drukarka Canon
- drukarka Fujifilm
- drukarka Toshiba
- drukarka D-Link
- drukarka Citizen
- drukarka HP
- drukarka Brother
- drukarka Honeywell
- drukarka Kodak
- drukarka Primera
- drukarka Xerox
- drukarka Godex
- drukarka Olivetti
- drukarka Zebra
- drukarka Dell
- drukarka Digitus
- drukarka Kyocera
- drukarka Ricoh
- drukarka Seiko
- drukarka Renkforce
- drukarka Thomson
- drukarka Panduit
- drukarka Olympus
- drukarka OKI
- drukarka Mitsubishi
- drukarka Intermec
- drukarka NEC
- drukarka Polaroid
- drukarka Konica Minolta
- drukarka Bixolon
- drukarka Pantum
- drukarka Datamax O'Neil
- drukarka DNP
- drukarka Equip
- drukarka TSC
- drukarka HiTi
- drukarka Triumph-Adler
- drukarka Fargo
- drukarka Entrust
- drukarka Lexmark
- drukarka Sagem
- drukarka Nilox
- drukarka Argox
- drukarka Royal Sovereign
- drukarka Oce
- drukarka Paxar
- drukarka IDP
- drukarka Metapace
- drukarka Ultimaker
- drukarka Toshiba TEC
- drukarka Frama
- drukarka Kogan
- drukarka Posiflex
- drukarka Dascom
- drukarka Vupoint Solutions
- drukarka Elite Screens
- drukarka DTRONIC
- drukarka Phoenix Contact
- drukarka Epson 7620
- drukarka Star
- drukarka EC Line
- drukarka Colop
- drukarka Approx
- drukarka Fichero
- drukarka Raspberry Pi
- drukarka Evolis
- drukarka Tally Dascom
- drukarka Custom
- drukarka Nisca
Najnowsze instrukcje dla drukarka
15 Października 2024
15 Października 2024
15 Października 2024
15 Października 2024
15 Października 2024
14 Października 2024
14 Października 2024
13 Października 2024
13 Października 2024
13 Października 2024