Instrukcja obsługi Sonnet G10E-SFP-1X-E3

Sonnet Karta sieciowa/adapter G10E-SFP-1X-E3

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Sonnet G10E-SFP-1X-E3 (2 stron) w kategorii Karta sieciowa/adapter. Ta instrukcja była pomocna dla 5 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF

Strona 1/2

Quick Start Guide

You Should Have

The following items should be included in your product package:

• One Solo10G SFP+ PCIe Card

• One additional mounting bracket

• 10GBASE-SR (short-range) SFP+ transceiver

• QSG

The following items may be required for installation:

• Medium Phillips screwdriver

Computer Compatibility

• Mac Pro® (Mid 2010 or newer), PC desktop, or server with full-

height or low-proﬁle PCIe slots

OS Compatibility

• macOS®

10.13.6+ (macOS Big Sur compatible)

• Windows® 10, 8, 7; Server 2016, 2012, 2008

• Linux®

Thunderbolt™ Compatibility

• Mac (Intel

® or M1) via a Thunderbolt-to-PCIe card expansion system

• Windows computer running Windows 10 Build 1809 or newer (64-

bit edition) via a Thunderbolt-to-PCIe card expansion system

4. Close your computer or expansion system, and then reconnect

it to its power source. If the card is installed in an expansion

system, also connect the Thunderbolt cable between the

Thunderbolt ports on the system and computer.

5. Insert the included 10GBASE-SR transceiver into the card’s SFP+

socket.

6. Connect a cable between the transceiver in the Sonnet card and

in the switch or device.

Driver Information

For Mac users, the drivers that enable the Solo10G SFP+ PCIe Card

to work in your computer or Thunderbolt expansion chassis are

installed as part of macOS 10.13.6 and later; the Sonnet card is ready

for use when you power on your computer.

For Windows users, please go to www.sonnettech.com/support/kb/

kb.php, navigate to and click the Solo10G SFP+ PCIe Card link.

Click the Driver link and then locate, download, and install the

appropriate drivers.

For Linux users, the drivers that enable the Solo10G SFP+ card to work

with Linux are installed as part of the Linux Kernel 5.0 and later.

For earlier versions, please go to www.sonnettech.com/support/

kb/kb.php, navigate to and click the Solo10G SFP+ PCIe Card link.

Click the Driver link and then locate, download, and install the

appropriate drivers.

Installation Preparation

Sonnet strongly recommends that you read the section in your

computer’s user manual that addresses PCI card installation, prior to

installing the Solo10G card into your system.

Card and Transceiver Installation Steps

1. Shut down your computer or Thunderbolt-to-PCIe card

expansion system and disconnect it from its power source, and

then open it to access the expansion card area (PCIe slots); refer

to the user’s manual for speciﬁc information.

2. Locate an available x4 (4-lane) or larger PCI Express slot and

then remove its access cover.

3. Remove the Sonnet card from its packaging, and then install it

into the PCI Express slot; make sure the card is firmly seated

and secured.

Solo

G™

SFP+ PCIe® Card

10 Gigabit Ethernet PCIe® 3.0 Adapter Card

With 10GBASE-SR (Short-Range) SFP+ Transceiver

Support Note: When handling computer products, you

must take care to prevent components from being damaged

by static electricity. Before opening your computer or removing

parts from their packages, always ground yourself first by touching

a metal part of the computer, such as a port access cover, and work

in an area free of static electricity; avoid carpeted areas. Handle all

electronic components by their edges, and avoid touching connector

traces and component pins.

Support Note: When installing the Solo10G card into your

computer, it may be necessary to change the PCIe card bracket

attached to the card with the spare bracket included in the package.

Basic Card Configuration Information—macOS

Conﬁgure the Sonnet card’s settings in the System Preferences

Network preferences panel; the card will be identiﬁed as a PCI

Ethernet card.

Performance Tuning Steps—macOS

Listed below are steps required to conﬁgure the Solo10G SFP+ PCIe

Card for maximum performance. Please note that to take advantage

of these settings, the switch or router to which the card is connected

must also support these features.

1. Open System Preferences, and then click Network. In the

Network System Preferences panel, click the Sonnet card’s port

in the left panel, and then click Advanced; a new panel appears.

2. In the Advanced panel, click Hardware. From the Conﬁgure

drop-down menu, select “Manually”. In the Speed drop-down

menu, leave the setting at 10G… In the Duplex drop-down

menu, select “full-duplex” ( “full duplex, ﬂow-control”). In not

the MTU drop-down menu, select “Custom,” and then enter

“9000” in the box below.

3. When you’ve ﬁnished changing the settings, click OK.

4. Back in the main Network window, click Apply after you’ve

completed changing the settings; your installation is complete.

Basic Card Configuration Information—Windows

Conﬁgure the Sonnet card’s settings using Windows Device

Manager. You may locate the device’s port in the Network adapters

category, listed as Sonnet Presto Solo SFP or Solo10G SFP+ PCIe Card.

Basic Card Configuration Information—Linux

The steps necessary to conﬁgure the Sonnet card with your

computer may vary based on the version of Linux running. Sonnet

recommends using whatever method or tools you would normally

use for conﬁguring any onboard ports.

Contacting Customer Service

Before contacting Customer Service, please check the Sonnet Web

site (www.sonnettech.com) for the latest updates and ﬁles. Email

requests generally receive the fastest responses, and are usually

processed within a 24-hour period during normal business hours,

excluding holidays. When you contact Customer Service, please have

the following information available:

• Product name

• OS version

• A System Report (macOS) or a Microsoft System Information

MSINFO32 (Windows) report (Windows), along with a description

of the issue(s) you are encountering with your device

If further assistance is needed, contact Sonnet Customer Service at:

E-mail: support@sonnettech.com

Tel: 1-949-472-2772

(Monday–Friday, 9 a.m.–5 p.m. Paciﬁc Time, excluding holidays)

Japan Customers

Contact Sonnet Customer Service Japan at:

E-mail: jp.support@sonnettech.com

Port and Indicator Information

1 – Link/Activity Indicator

This LED lights up green to indicate a link

is established between the Solo10G card

and the switch, and ﬂashes yellow when

the link is training.

2 – Link Speed Indicator

When a link is established between the

Solo10G card and the switch, this LED

lights to indicate the link speed to the

switch: green = 10Gb, yellow = lower

speeds.

3 – SFP+ Socket

Insert the included short-range SFP+

optical transceiver into the socket,

making sure it is ﬁrmly seated and

secured. Alternatively, you can install a

long-range SFP+ transceiver or an RJ45

SFP+ copper transceiver (both sold

separately). You may even use a

direct-attached SFP+ terminated

copper cable up to 10 meters long (sold

separately) to connect to a switch or

storage system.

Support Note: This document was up to date at the time

of printing. However, changes to the hardware or software

may have occurred since then. Please check the Sonnet website for

the latest documentation.

1. Go to www.sonnettech.com/support/kb/kb.php

2. Navigate to and click the Solo10G SFP+ PCIe Card link, and then

click the Documentation link.

5. Click the Solo10G SFP+ PCIe Card Quick Start Guide [English] link,

and then check the Document Version information. If the version

listed is later than this document (revision F), click the Download

Now button for the latest version.

Specyfikacje produktu

Marka:	Sonnet
Kategoria:	Karta sieciowa/adapter
Model:	G10E-SFP-1X-E3

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Sonnet G10E-SFP-1X-E3, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą

Twoje imię*

Twój email*

Napisz tutaj swoje pytanie

Instrukcje Karta sieciowa/adapter Sonnet

Sonnet Echo Express SE I Instrukcja

3 Października 2024

Sonnet Solo5G Instrukcja

3 Października 2024

Sonnet SOLO10G Instrukcja

3 Października 2024

Sonnet Echo Express SE III Instrukcja

3 Października 2024

Sonnet Echo Express SEL Instrukcja

3 Października 2024

Sonnet GE1000LAB-E Instrukcja

3 Października 2024

Sonnet Presto Gigabit Server PCIe Instrukcja

3 Października 2024

Sonnet G10E-SFP-1X-E3 Instrukcja

3 Października 2024

Instrukcje Karta sieciowa/adapter

Najnowsze instrukcje dla Karta sieciowa/adapter

LevelOne FNC-0109TX Instrukcja

14 Października 2024

StarTech.com ST1000SPEX2T Instrukcja

9 Października 2024

StarTech.com ST1000SPEX2LT Instrukcja

9 Października 2024

StarTech.com AF221CE-POE-INJECTOR Instrukcja

9 Października 2024

StarTech.com USB3LINK Instrukcja

9 Października 2024

StarTech.com PCMACLINK2 Instrukcja

9 Października 2024

StarTech.com PEX1000SFP Instrukcja

9 Października 2024

StarTech.com ST2GPEX Instrukcja

9 Października 2024

StarTech.com USB56KEM2 Instrukcja

9 Października 2024

StarTech.com PUSBADAP Instrukcja

9 Października 2024