Instrukcja obsługi Vigitron Vi22201

Vigitron Karta sieciowa/adapter Vi22201

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Vigitron Vi22201 (2 stron) w kategorii Karta sieciowa/adapter. Ta instrukcja była pomocna dla 7 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/2
Application Drawing
Vi22201 802.3af/at Powered Device (PD) Installation Manual
DO NOT OPEN
RISK OF ELECTRIC SHOCK
CAUTION
CAUTION: TO REDUCE THE RISK OF ELECTRICAL SHOCK,
DO NOT REMOVE COVER. NO USER SERVICEABLE
PARTS INSIDE. REFER SERVICING TO QUALIFIED
SERVICE PERSONNEL.
IP Camera-end Installation
The Smart Choice for Transmission Solutions www.vigitron.com
Important Safety Warning
- Select the output voltage using with the slide switch on the opposite side
of RJ45 connectors.
- Use the 12/24VDC output to power a non-PoE device. Be sure to observe
polarity where Red is Positive & Black is Negative.
- Connect a standard Cat5/6 cable of maximum 100m in length from a PoE
switch or Midspan to the Vi22201 DATA+Poe port.
- Connect another Cat5/6 cable to the DATA port of the Vi22201 to a
non-PoE device.
PoE Switch/NVR-end Installation
- The other end of the RJ45 cable needs to be connected to a PoE capable
port of a PoE switch or a Midspan. The PoE port need to be able to provide
enought power to the Vi22201 and its connected PoE device.
- Read these instructions.
- Keep these instructions.
- Follow all instructions.
- Heed all warnings.
- Do not use this apparatus near water.
- Clean only with a dry cloth.
- Install in accordance with the manufacturer’s instructions.
- This installation should be made by a qualified service person and should
conform to all local codes.
- DO NOT bundle UTP or Coax signals in the same conduit as high-voltage
wiring.
- To reduce the risk of fire or electrical shock, do not expose these products
to rain, moisture, dripping or splashing.
- No objects filled with liquids, such as vases, shall be placed on Vigitron
equipment.
- DO NOT install the unit in a place where the operating ambient tempera
ture exceeds 75°C.
- Make sure that the external power supply output voltage is in the recom
mended range.
- Do not install near any heat sources such as radiators, heat registers,
stoves or other apparatus that produce heat.
- Protect the power cord from being walked on or pinched particularly at
plugs, convenience receptacles, and the point where they exit from the
apparatus.
- Only use attachments/accessories specified by the manufacturer.
- Unplug this apparatus during lightning storms or when unused for long
periods of time.
- Refer all servicing to qualified service personnel. Servicing is required
when the apparatus has been damaged in any way, such as a power
supply cord or plug is damaged, liquid has been spilled, or objects have
fallen into the apparatus, the apparatus has been exposed to rain or
moisture, does not operate normally, or has been dropped.
- The mains plug is used as the disconnect device and shall remain readily
operable.
WARNING! - To reduce the risk of fire or electric shock, do not expose
this apparatus to rain or moisture. This apparatus should not be exposed to
dripping or splashing and no objects filled with liquids, such as vases should
be placed on the apparatus.
WARNING! - This apparatus is a Class I product. This product must
be connected to a mains socket outlet thru a PoE source device.
WARNING! - The main plug or the PoE + Data are used as the
disconnect device and should remain readily operable.
The Vi22201 is a PoE splitter that is fully compliant with IEEE 802.3af
(15.4W) and IEEE 802.3at (30W) standards. When used with a PoE switch
or PoE Midspan, it separates PoE from Ethernet data and regulates the PoE
high voltage to 12VDC or 24VDC.
It is designed to power Non-PoE IP devices and can provide 12VDC or
24VDC up to 30W. The output voltage is selected by a slide switch. The
Vi22201 is equipped with over current protection to safeguard connected
devices and can operate at extended temperature of -40°C to +75°C. It is
compact in size and can fit easily in most camera housings. The Vi22201
can be combined with extenders to provide remote DC power over UTP,
Coax or single pair wire at distances up to 3,000 without the need for local
power supplies.
The Vi22201 is capable of meeting the demanding power requirements for
access control, lighting, emergency phone systems and cameras with
heaters/blowers. It is an ideal solution for providing remote power to
non-PoE IP devices and save installation time and cost. Powering non-PoE devices at standard and extended distances
The Vi22201 can power a wide range of PoE devices at standard and extended distances up
to 30W.
12/24VDC
Data
Data + PoE
Extended UTP
Data + PoE
Extended Coax
Data + PoE
328 ft. (100m)
Data + PoE
328 ft. (100m)
Data + PoE
328 ft. (100m)
Data + PoE
328 ft. (100m)
Coax
Cat 5/6
Vi2401A
Vi22201
Vi2401A
Emergency
Call Box
Emergency
Light
Vi2301A
Vi22201
Vi2301A Data + PoE
Data + PoE
Vi22201
Vi22201 LED Light
12/24VDC
Data
12/24VDC
Data
12/24VDC
Data
IP Camera
Maxii
Power
TM
Limited Lifetime Warranty
Vigitron, Inc. warrants that all Vigitron products (“Product”), if used in accordance
with these instructions, will be free of defects in material and workmanship for
lifetime defined as the duration period of time until product end of life is announce-
ment. After which Vigitron will continue to provide warranty services for a period of 3
years. Period covering valid warranty will be determined by proof of purchase in the
form of an invoice from an authorized Vigitron dealer.
Warranty will only be provided for as long as the original end user purchaser owns
the product. Warranty is not transferrable. At Vigitron's option, defective product will
be repaired, replaced or substituted with a product of equal value. This warranty
does not apply if, in the judgment of Vigitron, Inc., the Product fails due to damage
from shipment, handling, storage, accident, abuse or misuse, or if it has been used
or maintained not conforming to Product manual instructions, has been modified, or
serial number removed or defaced. Repair by anyone other than Vigitron, Inc. or an
approved agent will void this warranty. Vigitron, Inc. shall not under any circum-
stances be liable to any person for any incidental, indirect or consequential
damages, including damages resulting from use or malfunction of the product, loss
of profits or revenues or costs of replacement goods. The maximum liability of
Vigitron, Inc. under this warranty is limited to the original purchase price of the
Product only.
Technical Specifications*
Drawings
© Copyright 2022 Vigitron, Inc.
TEL (+1) 858 - 484 - 5209 • FAX (+1) 858 - 484 - 1205
7810 Trade Street, Suite 100, San Diego, CA 92121, USA • support@vigitron.com • www.vigitron.com
Vi22201_UM
Electrical
Ethernet Interface Standard 10/100Mbps
Data Rate Auto select 10/100Mbps
Full speed / Full duplex
Power Consumption Based on input power
Power Input IEEE 802.3af, 15.4W
IEEE 802.3at, 30W
Power Output 12V DC @ 2.5A
24VDC @ 1.25A
Connections Input Power: RJ45
Power Out: Push Connector
Data: RJ45
Status LEDs PoE: Red
DC Output Available: Green
Data Interfaces and RFC 768 UDP, RFC 2068 HTTP
Compliances RFC 793 TCP, RFC 791 IP
RFC 1783 TFTP, RFC 894 IP over Ethernet
RFC 2544 TCP/IP Packet Transmission
PoE Compatibility IEEE 802.3af / Class 0,1,2,3
IEEE 802.3at / Class 4
Mechanical
Dimensions 1.36x2.13x2.91 in., 34.5x54.1x73.9 cm (HxWxL)
Weight 0.27 lb, 123 g
Environmental
Humidity 0 to 90%, Non-condensing
Temperature Operating: -40°C to +75°C
Storage: -65°C to +85°C
Regulatory
Safety CE
Environmental RoHS, WEEE
*Specifications are subject to change without notice.
Top View Left ViewRight View
Vi22201 PoE+ Splitter
Power Out
PoE
RoH S
2.13"
5.4 cm
12/24VDC DATA DATA+PoE
2.91"
7.4 cm
12V 24V
1.36"
3.5 cm

Specyfikacje produktu

Marka: Vigitron
Kategoria: Karta sieciowa/adapter
Model: Vi22201

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Vigitron Vi22201, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje Karta sieciowa/adapter Vigitron

Vigitron

Vigitron MaxiiView Vi00023 Instrukcja

3 Kwietnia 2025
Vigitron

Vigitron Vi22601 Instrukcja

14 Marca 2025
Vigitron

Vigitron Vi22201 Instrukcja

14 Marca 2025
Vigitron

Vigitron Vi3305 Instrukcja

10 Grudnia 2024

Instrukcje Karta sieciowa/adapter

Najnowsze instrukcje dla Karta sieciowa/adapter

Mikrotik

Mikrotik RB493 Instrukcja

8 Kwietnia 2025
EtherWAN

EtherWAN EX41941F Instrukcja

3 Kwietnia 2025
AVPro Edge

AVPro Edge AC-MXNET-10G-TCVR Instrukcja

2 Kwietnia 2025
EtherWAN

EtherWAN TG103H-0802 Instrukcja

2 Kwietnia 2025
AVPro Edge

AVPro Edge MXNet AC-MXNET-10G-TCVR Instrukcja

1 Kwietnia 2025
ScreenBeam

ScreenBeam ECB6250 Instrukcja

30 Marca 2025
Ubiquiti Networks

Ubiquiti Networks USW-Aggregation Instrukcja

29 Marca 2025
AirLive

AirLive USB-25G Instrukcja

12 Marca 2025
Louroe Electronics

Louroe Electronics IF-PX Instrukcja

10 Marca 2025
Atlantis Land

Atlantis Land NetFly UP3 WN Instrukcja

22 Lutego 2025