Instrukcja obsługi Satel ETHM-1 Plus

Satel detektor ETHM-1 Plus

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Satel ETHM-1 Plus (41 stron) w kategorii detektor. Ta instrukcja była pomocna dla 5 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/41
ETHM-1 Plus
Ethernet communication module
Firmware version 2.07 ethm1_plus_en 12 /20
SATEL sp. z o.o. • ul. Budowlanych 66 • 80-298 Gdańsk POLAND
tel. +48 58 320 94 00
www.satel.eu
IMPORTANT
The module should be installed by qualified personnel.
Read carefully this manual before proceeding to installation.
Changes, modifications or repairs not authorized by the manufacturer shall void your rights
under the warranty.
FreeRTOS is used in this device (www.freertos.org).
SATEL aims to continually improve the quality of its products, which may result in changes in
their technical specifications and software. Current information about the changes being
introduced is available on our website.
Please visit us at:
http://support.satel.eu
The declaration of conformity may be consulted at www.satel.eu/ce
The following symbols may be used in this manual:
- ; note
- . caution
CONTENTS
1 General............................................................................................................................. 2
2 Field of application............................................................................................................ 2
3 Electronics board.............................................................................................................. 3
4 Setting address................................................................................................................. 4
4.1 Module connected to INTEGRA / INTEGRA Plus control panel ................................. 4
4.2 Module connected to VERSA control panel ................................................................ 4
5 4 Installation ........................................................................................................................
6 Configuring the settings .................................................................................................... 6
6.1 Module connected to INTEGRA / INTEGRA Plus control panel ................................. 6
6.1.1 ETHM-1 ................................................................................................................ 6
6.1.2 INT-GSM functions ............................................................................................. 11
6.1.3 IP filter ................................................................................................................ 11
6.1.4 User functions .................................................................................................... 13
6.1.5 Virtual keypad .................................................................................................... 14
6.1.6 Macro commands ............................................................................................... 15
6.2 Module connected to VERSA control panel .............................................................. 25
6.2.1 LAN .................................................................................................................... 27
6.2.2 Messaging .......................................................................................................... 27
7 Remote programming / operating of control panel via module .......................................29
7.1 GUARDX program .................................................................................................... 29
7.1.1 settings Configuring the GUARDX program ....................................................... 30
7.1.2 Initiating connection from GUARDX program ..................................................... 31
7.1.3 Initiating connection from keypad (through control panel) .................................. 32
7.1.4 Initiating connection by SMS message ..............................................................32
7.1.5 Establishing connection via the SATEL server ................................................... 32
7.2 Web browser............................................................................................................. 33
7.3 cation INTEGRA CONTROL appli ............................................................................. 34
7.3.1 Configuring the settings in INTEGRA CONTROL application (Android) ............. 34
7.3.2 Configuring the settings in INTEGRA CONTROL application (iOS) ................... 36
7.3.3 Establishing the communication ......................................................................... 38
8 Specifications ................................................................................................................. 38


Specyfikacje produktu

Marka: Satel
Kategoria: detektor
Model: ETHM-1 Plus

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Satel ETHM-1 Plus, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje detektor Satel

Satel

Satel ACU-120 Instrukcja

20 Września 2024
Satel

Satel MAGENTA Instrukcja

20 Września 2024
Satel

Satel ACX-210 Instrukcja

18 Września 2024
Satel

Satel FD-1 Instrukcja

18 Września 2024
Satel

Satel INT-KWRL2 Instrukcja

18 Września 2024
Satel

Satel ETHM-1 Plus Instrukcja

18 Września 2024
Satel

Satel INT-E Instrukcja

17 Września 2024

Instrukcje detektor

Najnowsze instrukcje dla detektor