Instrukcja obsługi IFM OIP282

IFM detektor OIP282

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla IFM OIP282 (3 stron) w kategorii detektor. Ta instrukcja była pomocna dla 4 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/3
Operating instructions
Retro-reflective sensor
OIP2xx
7200013 / 00 07 / 2012
UK
UK
UK
UK
UK
2
1 Preliminary note
1.1 Symbols used
Instruction
> Reaction, result
[…] Designation of pushbuttons, buttons or indications
Cross-reference
Important note
Non-compliance can result in malfunctions or interference.
2 Functions and features
In conjunction with a prismatic reflector or reflective tape the retro-reflective sen-
sor detects objects and materials without contact and indicates their presence by
a switching signal.
Range: ( type label).
3 Installation
Fit the prismatic reflector or the reflective tape behind the object to be detected.
Align the retro-reflective sensor to it and secure it to a bracket.
Maximum range only with accurate alignment.
4 Operating and display elements
1: LED green (operation)
2: LED yellow (sensor output status)
3
UK
5 Electrical connection
The unit must be connected by a qualified electrician.
The national and international regulations for the installation of electri-
cal equipment must be adhered to.
Ensure voltage supply to EN 50178.
Disconnect power.
Connect the unit as follows:
PNP NPN
L+
L
1
4
3
L+
L
1
4
3
6 Operation
Check whether the unit operates correctly.
> The yellow LED is lit when the switching output is switched.
> The green LED is lit when the sensor is ready for operation.
7 Maintenance, repair, disposal
Keep the lens of the sensor free from soiling.
For cleaning do not use any solvents or cleaning agents which could damage
the plastic parts.
After use dispose of the unit in an environmentally friendly way in accordance
with the applicable national regulations.
Faulty sensors must only be repaired by the manufacturer.
Technical data and further information at www.ifm.com


Specyfikacje produktu

Marka: IFM
Kategoria: detektor
Model: OIP282

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z IFM OIP282, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje detektor IFM

IFM

IFM OIP282 Instrukcja

30 Grudnia 2025
IFM

IFM O5P503 Instrukcja

30 Grudnia 2025
IFM

IFM OW1010 Instrukcja

5 Grudnia 2024

Instrukcje detektor

Najnowsze instrukcje dla detektor