Instrukcja obsługi RIKON 10-347

RIKON Maszyna do piłowania 10-347

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla RIKON 10-347 (40 stron) w kategorii Maszyna do piłowania. Ta instrukcja była pomocna dla 5 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/40
www.rikontools.com
10-347M3
18” Professional Bandsaw
Operator’s Manual
Record the serial number and date of purchase in your manual for future reference.
The serial number can be found on the specication label on the rear of your machine.
Serial Number: _________________________ Date of purchase: _________________________
For technical support or parts questions, email techsupport@rikontools.com or call toll free at (877)884-5167
4001824
2
Specications.....................................................................................................................2
Safety Instructions ........................................................................................................3 - 6
Getting To Know Your Machine .........................................................................................7
Contents of Package ....................................................................................................8 - 9
Assembly .........................................................................................................................10 - 11
Adjustments...............................................................................................................12 - 18
Operation ..................................................................................................................19 - 20
Maintenance ....................................................................................................................21
Wiring Diagram ................................................................................................................21
Troubleshooting ........................................................................................................22 - 25
Parts Explosions & Parts Lists ..................................................................................26 - 36
Accessories ..........................................................................................37
Notes ...............................................................................................................................38
Warranty ..........................................................................................................................39
TABLE OF CONTENTS
SPECIFICATIONS
Motor ....................................................................................4 HP, TEFC
Motor Speed (no load)............................................................3400 RPM
Volts ............................................................................................. 220 V
Amps, Hertz .........................................................................16 A, 60 Hz
Blade Length ................................................................ 162” (4115 mm)
Blade Width ..................................................... 1/4” - 1-3/8” (6 - 35 mm)
Blade Speed ....................................................................... 4920 ft/min .
Table Size ............................................... 25” x 19” (635 mm x 483 mm)
Table Tilt .................................................................. Left -5
0 , Right 450
Maximum Cutting Width (throat) ..................................17-1/2” (444 mm)
Maximum Cuttng Depth (height) ........................................19” (483 mm)
Table Height .................................................................33-1/2” (851 mm)
Fence Height ....................................................................... 6” (152 mm)
Fence Length .............................................................. 18-3/4” (476 mm)
Dust Ports (2) ...................................................... 4” Diameter (100 mm)
Overall Size .............................. 80” x 39” x 30” (2032 x 991 x 762 mm)
Base Size .......................................29-15/16” x 18-1/8” (760 x 460 mm)
Net Weight .....................................................................498 lbs (226 kg)
NOTE: The specications, photographs, drawings and information in this manual represent the current model when the
manual was prepared. Changes and improvements may be made at any time, with no obligation on the part of Rikon
Power Tools, Inc. to modify previously delivered units. Reasonable care has been taken to ensure that the information in
this manual is correct, to provide you with the guidelines for the proper safety, assembly and operation of this machine.
SAFETY SYMBOLS
IMPORTANT! Safety is the single most important consideration in the operation of this equipment. The following
instructions must be followed at all times. Failure to follow all instructions listed below may result in electric shock, re,
and/or serious personal injury.
There are certain applications for which this tool was designed. We strongly recommend that this tool not be modied and/
or used for any other application other than that for which it was designed. If you have any questions about its application,
do not use the tool until you have contacted us and we have advised you.
SAFETY INSTRUCTIONS
GENERAL SAFETY
KNOW YOUR POWER TOOL. Read the owner’s manual
carefully. Learn the tool’s applications, work capabilities,
and its specic potential hazards.
BEFORE USING YOUR MACHINE
To avoid serious injury and damage to the tool, read and
follow all of the Safety and Operating Instructions before
operating the machine.
1. Some dust created by using power tools contains
chemicals known to the State of California to cause cancer,
birth defects, or other reproductive harm.
Some examples of these chemicals are:
• Lead from lead-based paints.
• Crystalline silica from bricks, cement, and other
• masonry products.
• Arsenic and chromium from
chemically treated lumber.
Your risk from these exposures varies, depending on how
often you do this type of work. To reduce your exposure to
these chemicals: work in a well ventilated area and work
with approved safety equipment, such as those dust masks
that are specially designed to lter out microscopic
particles.
2. the entire Owner’s Manual. how to use READ LEARN
the tool for its intended applications.
3. If the tool is supplied with a 3 GROUND ALL TOOLS.
prong plug, it must be plugged into a 3-contact electrical
receptacle. The 3rd prong is used to ground the tool and
provide protection against accidental electric shock. DO
NOT remove the 3rd prong. See Grounding Instructions on
the following pages.
4. AVOID A DANGEROUS WORKING ENVIRONMENT.
DO NOT use electrical tools in a damp environment or
expose them to rain.
5. use electrical tools in the presence of DO NOT
ammable liquids or gasses.
6. ALWAYS keep the work area clean, well lit, and
organized. work in an environment with oor DO NOT
surfaces that are slippery from debris, grease, and wax.
7. KEEP VISITORS AND CHILDREN AWAY. DO NOT
permit people to be in the immediate work area, especially
when the electrical tool is operating.
8. to perform an operation DO NOT FORCE THE TOOL
for which it was not designed. It will do a safer and higher
quality job by only performing operations for which the tool
was intended.
9. wear loose WEAR PROPER CLOTHING. DO NOT
clothing, gloves, neckties, or jewelry. These items can get
caught in the machine during operations and pull the
operator into the moving parts. The user must wear a
protective cover on their hair, if the hair is long, to prevent it
from contacting any moving parts.
10. CHILDPROOF THE WORKSHOP AREA by removing
switch keys, unplugging tools from the electrical
receptacles, and using padlocks.
11. ALWAYS UNPLUG THE TOOL FROM THE
ELECTRICAL RECEPTACLE when making adjustments,
changing parts or performing any maintenance.
3
SAFETY ALERT SYMBOL: Indicates DANGER, WARNING, or CAUTION. This symbol may be used in
conjunction with other symbols or pictographs.
Indicates an imminently hazardous situation, which, if not avoided, could result in death or serious injury.
Indicates a potentially hazardous situation, which, if not avoided, could result in death or serious injury.
Indicates a potentially hazardous situation, which, if not avoided, could result in minor or moderate
injury.
NOTICE: Shown without Safety Alert Symbol indicates a situation that may result in property damage.

Specyfikacje produktu

Marka: RIKON
Kategoria: Maszyna do piłowania
Model: 10-347

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z RIKON 10-347, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje Maszyna do piłowania RIKON

RIKON

RIKON 10-600VS Instrukcja

27 Grudnia 2024
RIKON

RIKON 10-353 Instrukcja

27 Grudnia 2024
RIKON

RIKON 10-342 Instrukcja

27 Grudnia 2024
RIKON

RIKON 10-205 Instrukcja

27 Grudnia 2024
RIKON

RIKON 11-600S Instrukcja

27 Grudnia 2024
RIKON

RIKON 10-3061 Instrukcja

27 Grudnia 2024
RIKON

RIKON 10-347 Instrukcja

27 Grudnia 2024
RIKON

RIKON 10-305 Instrukcja

27 Grudnia 2024
RIKON

RIKON 10-110 Instrukcja

3 Października 2024
RIKON

RIKON 10-306 Instrukcja

3 Października 2024

Instrukcje Maszyna do piłowania

Najnowsze instrukcje dla Maszyna do piłowania

MSW

MSW -TSAW2000EXT Instrukcja

31 Grudnia 2025
Trotec

Trotec PJSS 10-20V Instrukcja

30 Grudnia 2025
Stihl

Stihl MS 201 TC-M Instrukcja

30 Grudnia 2025
Black Decker

Black Decker 3157 Instrukcja

30 Grudnia 2025
Silverline

Silverline 624327 Instrukcja

30 Grudnia 2025
Bavaria

Bavaria BEC 1835 Instrukcja

30 Grudnia 2025
Sun Joe

Sun Joe SWJ802E-PRP Instrukcja

30 Grudnia 2025
Sun Joe

Sun Joe 20VIONLTE-CS10-RM Instrukcja

30 Grudnia 2025
AL-KO

AL-KO C50 Li Instrukcja

30 Grudnia 2025
Spear & Jackson

Spear & Jackson SPJCS 1840 Instrukcja

29 Grudnia 2024