Instrukcja obsługi RIKON 10-342EVS
RIKON
Zaagmachine
10-342EVS
Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla RIKON 10-342EVS (40 stron) w kategorii Zaagmachine. Ta instrukcja była pomocna dla 2 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek
Strona 1/40
SAFETY SYMBOLS
IMPORTANT! Safety is the single most important consideration in the operation of this equipment. The following
instructions must be followed at all times. Failure to follow all instructions listed below may result in electric shock, re,
and/or serious personal injury.
There are certain applications for which this tool was designed. We strongly recommend that this tool not be modied and/
or used for any other application other than that for which it was designed. If you have any questions about its application,
do not use the tool until you have contacted us and we have advised you.
SAFETY INSTRUCTIONS
GENERAL SAFETY
KNOW YOUR POWER TOOL. Read the owner’s manual
carefully. Learn the tool’s applications, work capabilities,
and its specic potential hazards.
BEFORE USING YOUR MACHINE
To avoid serious injury and damage to the tool, read and
follow all of the Safety and Operating Instructions before
operating the machine.
1. Some dust created by using power
tools contains chemicals known to the State of California to
cause cancer, birth defects, or other reproductive harm.
Some examples of these chemicals are:
• Lead from lead-based paints.
• Crystalline silica from bricks, cement, and other
• masonry products.
• Arsenic and chromium from
chemically treated lumber.
Your risk from these exposures varies, depending on how
often you do this type of work. To reduce your exposure to
these chemicals: work in a well ventilated area and work
with approved safety equipment, such as those dust masks
that are specially designed to lter out microscopic
particles.
2. the entire Owner’s Manual. how to use READ LEARN
the tool for its intended applications.
3. If the tool is supplied with a 3 GROUND ALL TOOLS.
prong plug, it must be plugged into a 3-contact electrical
receptacle. The 3rd prong is used to ground the tool and
provide protection against accidental electric shock. DO
NOT remove the 3rd prong. See Grounding Instructions on
the following pages.
4. AVOID A DANGEROUS WORKING ENVIRONMENT.
DO NOT use electrical tools in a damp environment or
expose them to rain.
5. use electrical tools in the presence of DO NOT
ammable liquids or gasses.
6. ALWAYS keep the work area clean, well lit, and
organized. work in an environment with oor DO NOT
surfaces that are slippery from debris, grease, and wax.
7. KEEP VISITORS AND CHILDREN AWAY. DO NOT
permit people to be in the immediate work area, especially
when the electrical tool is operating.
8. to perform an operation DO NOT FORCE THE TOOL
for which it was not designed. It will do a safer and higher
quality job by only performing operations for which the tool
was intended.
9. wear loose WEAR PROPER CLOTHING. DO NOT
clothing, gloves, neckties, or jewelry. These items can get
caught in the machine during operations and pull the
operator into the moving parts. The user must wear a
protective cover on their hair, if the hair is long, to prevent it
from contacting any moving parts.
10. CHILDPROOF THE WORKSHOP AREA by removing
switch keys, unplugging tools from the electrical
receptacles, and using padlocks.
11. ALWAYS UNPLUG THE TOOL FROM THE
ELECTRICAL RECEPTACLE when making adjustments,
changing parts or performing any maintenance.
3
SAFETY ALERT SYMBOL: Indicates DANGER, WARNING, or CAUTION. This symbol may be used in
conjunction with other symbols or pictographs.
Indicates an imminently hazardous situation, which, if not avoided, could result in death or serious injury.
Indicates a potentially hazardous situation, which, if not avoided, could result in death or serious injury.
Indicates a potentially hazardous situation, which, if not avoided, could result in minor or moderate injury.
NOTICE: Shown without Safety Alert Symbol indicates a situation that may result in property damage.
Specyfikacje produktu
Marka: | RIKON |
Kategoria: | Zaagmachine |
Model: | 10-342EVS |
Potrzebujesz pomocy?
Jeśli potrzebujesz pomocy z RIKON 10-342EVS, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą
Instrukcje Zaagmachine RIKON
2 Października 2024
2 Października 2024
Instrukcje Zaagmachine
- Zaagmachine AEG
- Zaagmachine Worx
- Zaagmachine Milwaukee
- Zaagmachine Stihl
- Zaagmachine Bosch
- Zaagmachine Parkside
- Zaagmachine Global
- Zaagmachine Stiga
- Zaagmachine Festool
- Zaagmachine Stanley
- Zaagmachine Black & Decker
- Zaagmachine Scheppach
- Zaagmachine Proxxon
- Zaagmachine Ford
- Zaagmachine Hazet
- Zaagmachine Grizzly
- Zaagmachine Gardena
- Zaagmachine DeWalt
- Zaagmachine Einhell
- Zaagmachine Remington
- Zaagmachine Genesis
- Zaagmachine Hyundai
- Zaagmachine Silverline
- Zaagmachine Husqvarna
- Zaagmachine Makita
- Zaagmachine Ozito
- Zaagmachine Draper
- Zaagmachine RYOBI
- Zaagmachine Chicago Pneumatic
- Zaagmachine Flex
- Zaagmachine Yard Force
- Zaagmachine Baumr-AG
- Zaagmachine Sovereign
- Zaagmachine Hilti
- Zaagmachine Trotec
- Zaagmachine Dremel
- Zaagmachine AL-KO
- Zaagmachine Güde
- Zaagmachine Texas
- Zaagmachine ATIKA
- Zaagmachine Bavaria
- Zaagmachine Zipper
- Zaagmachine Mafell
- Zaagmachine Florabest
- Zaagmachine Ferrex
- Zaagmachine McKenzie
- Zaagmachine Ergotools Pattfield
- Zaagmachine Ferm
- Zaagmachine Hitachi
- Zaagmachine Herkules
- Zaagmachine Craftsman
- Zaagmachine Fieldmann
- Zaagmachine Homelite
- Zaagmachine Ridgid
- Zaagmachine Gardenline
- Zaagmachine PowerPlus
- Zaagmachine Bebe Confort
- Zaagmachine Vonroc
- Zaagmachine Powerfix
- Zaagmachine HiKOKI
- Zaagmachine McCulloch
- Zaagmachine Proviel
- Zaagmachine Porter-Cable
- Zaagmachine Metabo
- Zaagmachine Cotech
- Zaagmachine Skil
- Zaagmachine Wolfcraft
- Zaagmachine Brennenstuhl
- Zaagmachine Tryton
- Zaagmachine ACG
- Zaagmachine Sun Joe
- Zaagmachine Bort
- Zaagmachine Tanaka
- Zaagmachine Dolmar
- Zaagmachine Duro
- Zaagmachine Qualcast
- Zaagmachine Max
- Zaagmachine IKRA
- Zaagmachine MTM
- Zaagmachine Meister Craft
- Zaagmachine Batavia
- Zaagmachine Holzmann
- Zaagmachine Elu
- Zaagmachine BGU
- Zaagmachine Verto
- Zaagmachine Challenge Xtreme
- Zaagmachine Maxx
- Zaagmachine Elektra Beckum
- Zaagmachine Felisatti
- Zaagmachine Gude Pro
- Zaagmachine Robust
- Zaagmachine FIXIT
- Zaagmachine Einhell Bavaria
- Zaagmachine MyTool
Najnowsze instrukcje dla Zaagmachine
3 Października 2024
3 Października 2024
3 Października 2024
3 Października 2024
3 Października 2024
3 Października 2024
3 Października 2024
3 Października 2024
3 Października 2024
3 Października 2024