Instrukcja obsługi Posiflex CD-3860UN

Posiflex czytnik kodów kreskowych CD-3860UN

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Posiflex CD-3860UN (55 stron) w kategorii czytnik kodów kreskowych. Ta instrukcja była pomocna dla 2 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/55
1
1
Important Notice
No warranty of any kind is made in regard to this material, including, but not limited to,
implied warranties of merchantability or fitness for any particular purpose. We are not
liable for any errors contained herein nor for incidental or consequential damages in
connection with furnishing, performance or use of this material. We shall be under no
liability in respect of any defect arising from fair wear and tear, willful damage,
negligence, abnormal working conditions, failure to follow the instructions and warnings,
or misuse or alteration or repair of the products without written approval. No part of this
document may be reproduced, transmitted, stored in a retrieval system, transcribed, or
translated into any human or computer or other language in any form or by any means
electronic, mechanical, magnetic, optical, chemical, biological, manual or otherwise,
except for brief passages which may be quoted for purposes of scholastic or literary
review, without express written consent and authorization. We reserve the right to make
changes in product design without reservation and without notification. The material in
this guide is for information only and is subject to change without notice. All trademarks
mentioned herein, registered or otherwise, are the properties of their various, ill,
assorted owners.
General Handling Precautions
Do not dispose of the scanner in fire.
Do not put the scanner directly in the sun or by any heat source.
Do not use or store the scanner in a very humid place.
Do not drop the scanner or allow it to collide violently with other objects.
Do not take the scanner apart without authorization.
Printing Guidance
This programming guide is in A5 size. Please double check your printer setting before
printing it out.
When barcodes are to be printed out for programming, the use of a high-resolution laser
printer is strongly suggested for the best scan result.
Copyright © 2010. All rights reserved.
CD-3860 Bar Code Scanner
User’s Manual
Rev. Original
2
2
For CE-Countries
This scanner is in conformity with CE standards. Please note that an approved, CE-marked
power supply unit should be used in order to maintain CE conformance.
Table of Contents
About This Guide ........................................................................................................3
Introduction to Scanner Configuration.......................................................................3
Default Parameters .....................................................................................................4
Scanner Operation........................................................................4
Interface Communication.............................................................4
Symbologies..................................................................................5
Data Formating.............................................................................6
Programming Procedure.............................................................................................7
Parameter Setting.......................................................................................................8
Scanner Operation........................................................................8
Interface Configuration...............................................................16
The Symbologies.........................................................................24
Data Editing ................................................................................46
Appendix 1: USB Virtual COM Driver Installation ......................49
Appendix 2: Barcode Length Setting ..........................................50
Appendix 3: Full ASCII Code 39 Table.........................................51
3
About This Guide
This programming guide applies to various handheld scanners, including
* Advanced Handheld Contact CCD Scanner,
* Advanced Middle-Range Handheld CCD Scanner,
Some settings are not available for certain models. If you are not sure about the
model of your scanner at hand, refer to the device label or contact your distributor.
This document is in A5 size. Please check your printing setting before printing it out.
When barcodes are to be printed out for programming, the use of a high-resolution
laser printer is strongly suggested for the best scan result.
The settings herein shall be updated periodically without prior notice. For the latest
version, please contact your distributor.
Introduction to Scanner Configuration
Scanning a series of programming barcode labels can configure the series scanners.
This allows decoding options and interface protocols to be tailored to a specific
application. The configuration is stored in non-volatile memory and will not be lost by
removing power from the scanner.
The scanner must be properly powered before programming. For RS-232C type
scanners, an external power adapter must be used to supply DC power to the scanner.
If a keyboard emulation type scanner is used with an IBM PC/XT/ AT, PS/2 or any fully
compatible computers, power will be drawn from the keyboard port. No external
power adapter is required. If keyboard emulation type scanner is used with any other
non IBM PC compatible computers, an external power adapter may be needed.
Programmable options are divided into four groups. The second group governs the
operation of different interfaces, RS-232 serial ports, keyboard, and USB. The third
group sets the decoding parameters for each barcode symbology. The last group is
about more advanced data formatting.

Specyfikacje produktu

Marka: Posiflex
Kategoria: czytnik kodów kreskowych
Model: CD-3860UN

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Posiflex CD-3860UN, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje czytnik kodów kreskowych Posiflex

Posiflex

Posiflex CD-3602U Instrukcja

9 Października 2024
Posiflex

Posiflex CD-3202U Instrukcja

9 Października 2024
Posiflex

Posiflex CD-3860UN Instrukcja

12 Września 2024
Posiflex

Posiflex CD-3601U Instrukcja

7 Września 2024
Posiflex

Posiflex CD-3201U Instrukcja

6 Września 2024
Posiflex

Posiflex LS-1000U Instrukcja

6 Września 2024

Instrukcje czytnik kodów kreskowych

Najnowsze instrukcje dla czytnik kodów kreskowych

Datalogic

Datalogic CBX500 Instrukcja

9 Października 2024
Brady

Brady IRX200 Instrukcja

8 Października 2024
Newland

Newland HR33 Marlin filaire Instrukcja

8 Października 2024
Wasp

Wasp WDI9600 Instrukcja

7 Października 2024
Wasp

Wasp WLS9500 Instrukcja

7 Października 2024
Wasp

Wasp WCS3900 Instrukcja

7 Października 2024
Wasp

Wasp WDI4600 Instrukcja

7 Października 2024
Wasp

Wasp WLR8900 Instrukcja

7 Października 2024
Wasp

Wasp WCS3905 Instrukcja

7 Października 2024
Wasp

Wasp WLS8600 Instrukcja

7 Października 2024