Instrukcja obsługi Ozito TLR-090A
Ozito
Laserowa woda
TLR-090A
Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Ozito TLR-090A (6 stron) w kategorii Laserowa woda. Ta instrukcja była pomocna dla 4 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek
Strona 1/6
85°
75°
67.5°
65°
55°
45°
35°
25°
15°
5°
90° TILE
LASER
7m Range
INSTRUCTION MANUAL
SPECIFICATIONS
Power: 4.5V DC (3 x AA Batteries)
Laser Wavelength: 635nm
Laser Power: Class II, ,1mW
Working Range: 7m
Accuracy: ±0.5mm/m
Weight: 0.355kg
TLR-090A
STANDARD EQUIPMENT
IN ORDER TO MAKE A CLAIM UNDER THIS
WARRANTY YOU MUST RETURN THE PRODUCT
TO YOUR NEAREST BUNNINGS WAREHOUSE WITH
YOUR BUNNINGS REGISTER RECEIPT. PRIOR TO
RETURNING YOUR PRODUCT FOR WARRANTY
PLEASE TELEPHONE OUR CUSTOMER SERVICE
HELPLINE:
Australia 1800 069 486
New Zealand 0508 069 486
3 YEAR REPLACEMENT WARRANTY
Your product is guaranteed for a period of 36 months from
the original date of purchase. If a product is defective it will
be replaced in accordance with the terms of this warranty.
Warranty excludes consumable parts, for example: valve adapters
and accessories.
WARNING
The following actions will result in the warranty being void.
• If the tool has been operated on a supply voltage other
than that specified on the tool.
• If the tool shows signs of damage or defects caused
by or resulting from abuse, accidents or alterations.
• Failure to perform maintenance as set out within the
instruction manual.
• If the tool is disassembled or tampered with in any way.
• Professional, industrial or high frequency use.
WARRANTY
TO ENSURE A SPEEDY RESPONSE PLEASE
HAVE THE MODEL NUMBER AND DATE OF
PURCHASE AVAILABLE. A CUSTOMER SERVICE
REPRESENTATIVE WILL TAKE YOUR CALL
AND ANSWER ANY QUESTIONS YOU MAY
HAVE RELATING TO THE WARRANTY POLICY
OR PROCEDURE.
OZITO Australia/New Zealand (Head Office) 1-23 Letcon Drive, Bangholme, Victoria, Australia 3175.
The benefits provided under this warranty are in addition
to other rights and remedies which are available to you at law.
Our goods come with guarantees that cannot be excluded
at law. You are entitled to a replacement or refund for a major
failure and for compensation for any other reasonably foreseeable
loss or damage. You are also entitled to have the goods repaired
or replaced if the goods fail to be of acceptable quality and the
failure does not amount to a major failure.
Generally you will be responsible for all costs associated with
a claim under this warranty, however, where you have suffered
any additional direct loss as a result of a defective product you
may be able to claim such expenses by contacting our customer
service helpline above.
ozito.com.au
85°
75°
67.5°
65°
55°
45°
35°
25°
15°
5°
90° Tile Laser
Wall Mounting Plate, 3 x AA
Batteries
0719
ONLINE MANUAL
Scan this QR Code with
your mobile device to take
you to the online manual.
85°
75°
67.5°
65°
55°
45°
35°
25°
15°
5°
The tool requires 3 AA batteries to operate.
1. Remove the metal wall
mounting plate if it is attached.
Note: The magnets on the base
of the tool are quite strong. Use
a at screwdriver to lift the plate
o the tile laser if necessary.
2. Push in the tab and lift o the
battery compartment lid.
3. Insert 3 AA batteries as
directed by the embossing in
the compartment.
4. Replace the battery
compartment lid by sliding the
lower tabs into the recess and
pressing the top half of the lid
into place.
1. On/O Button
2. Spirit Levels
3. 90° Line Lasers
4. Angle Reference Point
5. Angle Scale
6. Wall Mounting Plate
7. Battery Compartment
8. Magnetic Base
90° TILE LASER
TOP VIEW
BOTTOM VIEW
KNOW YOUR PRODUCT
1. INSTALLING BATTERIES
SETUP & PREPARATION
87
3
2
1
4
6
5
Installing The Wall Mounting Plate On A Wall
1. Remove the wall mounting plate from the tool.
2. Attach the mounting bracket
to a wall using a screw or nail
(not included). Be sure that
the head of the nail or screw
ts into the sunken recessed
side of the plate so that the
magnets on the tool can
connect rmly.
3. Place the base of the tile laser
onto the mounting plate.
4. Using the spirit levels as a
guide, rotate the tile laser on
the mounting plate until it is
fully level.
Attaching The Tile Laser
To A Metal Surface
The magnets on the base of the
tool can also be attached directly
to a metal surface.
Switching The Tool On/O
1. Press the on/o button once
to turn the unit on.
2. Press the button again to turn the lasers o.
Spirit Levels
The tile laser also has 2 perpendicular spirit levels to ensure the tool
is perfectly horizontal or vertical during installation and use.
2. USING THE WALL MOUNT 3. CONTROLS
OPERATION
85°
75°
67.5°
65°
55°
45°
35°
25°
15°
5°
85°
75°
67.5°
65°
55°
45°
35°
25°
15°
5°
WARNING! ENSURE THE LASER WINDOWS ARE
NOT AT EYE LEVEL OR DIRECTED TOWARDS
YOURSELF OR OTHERS WHEN OPERATING.
Specyfikacje produktu
| Marka: | Ozito |
| Kategoria: | Laserowa woda |
| Model: | TLR-090A |
Potrzebujesz pomocy?
Jeśli potrzebujesz pomocy z Ozito TLR-090A, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą
Instrukcje Laserowa woda Ozito
28 Września 2024
28 Września 2024
22 Września 2024
14 Września 2024
5 Września 2024
5 Września 2024
4 Września 2024
1 Września 2024
31 Sierpnia 2024
27 Sierpnia 2024
Instrukcje Laserowa woda
- Laserowa woda Leica
- Laserowa woda Milwaukee
- Laserowa woda Bosch
- Laserowa woda Toolcraft
- Laserowa woda DeWalt
- Laserowa woda Einhell
- Laserowa woda Silverline
- Laserowa woda Makita
- Laserowa woda Hilti
- Laserowa woda Fluke
- Laserowa woda Brandson
- Laserowa woda Stabila
- Laserowa woda Craftsman
- Laserowa woda Klein Tools
- Laserowa woda Alpha Tools
- Laserowa woda Steinberg
- Laserowa woda Laserliner
- Laserowa woda Bruder Mannesmann
- Laserowa woda Neo
- Laserowa woda PLS
- Laserowa woda Futech
Najnowsze instrukcje dla Laserowa woda
22 Marca 2025
13 Marca 2025
10 Marca 2025
5 Stycznia 2025
5 Stycznia 2025
5 Stycznia 2025
3 Stycznia 2025
3 Stycznia 2025
18 Grudnia 2024
18 Grudnia 2024