Instrukcja obsługi Ozito LMR-025
Ozito
Laserowa woda
LMR-025
Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Ozito LMR-025 (6 stron) w kategorii Laserowa woda. Ta instrukcja była pomocna dla 6 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek
Strona 1/6
LASER
RANGE FINDER
25m Range
INSTRUCTION MANUAL
SPECIFICATIONS
Battery: 3V DC (2 x AAA Battery)
Laser Power: Class 2, <1mW
Working Range: 0.05-25m
Laser Diode: 635nm
Accuracy: ±3.0mm
Weight: 90g
LMR-025
WHAT’S IN THE BOX
Laser Range Finder
2 x AAA Batteries
IN ORDER TO MAKE A CLAIM UNDER THIS
WARRANTY YOU MUST RETURN THE PRODUCT
TO YOUR NEAREST BUNNINGS WAREHOUSE WITH
YOUR BUNNINGS REGISTER RECEIPT. PRIOR TO
RETURNING YOUR PRODUCT FOR WARRANTY
PLEASE TELEPHONE OUR CUSTOMER SERVICE
HELPLINE:
Australia 1800 069 486
New Zealand 0508 069 486
3 YEAR REPLACEMENT WARRANTY
Your product is guaranteed for a period of 36 months from the
original date of purchase and is intended for DIY (Do It Yourself)
use only. If a product is defective it will be replaced in accordance
with the terms of this warranty. Lithium Ion batteries are covered
by a 12 month warranty. Warranty excludes consumable parts.
WARNING
The following actions will result in the warranty being void.
• If the tool has been operated on a supply voltage other
than that specified on the tool.
• If the tool shows signs of damage or defects caused
by or resulting from abuse, accidents or alterations.
• Failure to perform maintenance as set out within the
instruction manual.
• If the tool is disassembled or tampered with in any way.
WARRANTY
TO ENSURE A SPEEDY RESPONSE PLEASE
HAVE THE MODEL NUMBER AND DATE OF
PURCHASE AVAILABLE. A CUSTOMER SERVICE
REPRESENTATIVE WILL TAKE YOUR CALL
AND ANSWER ANY QUESTIONS YOU MAY
HAVE RELATING TO THE WARRANTY POLICY
OR PROCEDURE.
OZITO Australia/New Zealand (Head Office) 1-23 Letcon Drive, Bangholme, Victoria, Australia 3175.
The benefits provided under this warranty are in addition
to other rights and remedies which are available to you at law.
Our goods come with guarantees that cannot be excluded
at law. You are entitled to a replacement or refund for a major
failure and for compensation for any other reasonably foreseeable
loss or damage. You are also entitled to have the goods repaired
or replaced if the goods fail to be of acceptable quality and the
failure does not amount to a major failure.
Generally you will be responsible for all costs associated with
a claim under this warranty, however, where you have suffered
any additional direct loss as a result of a defective product you
may be able to claim such expenses by contacting our customer
service helpline above.
ozito.com.au
0317
OFF
m
Min/Max
OFF
m
Min/Max
ONLINE MANUAL
Scan this QR Code with your
mobile device to take you to
the online manual.
8 AAA Battery x 2
OFF
m
Min/Max
KNOW YOUR PRODUCT SETUP & PREPARATION
1. INSTALLING BATTERIES
1 Laser Window
2 Reference Point Icon
3 Battery Charge Indicator
4 Digital Display
5 Measurement Value
6 On/Off &
Measuring Button
7 Mode & Reference Button
LASER RANGE FINDER
ACCESSORIES
1
2
4
5
6
7
8
3
The Laser Range Finder unit requires 2 x AAA batteries to operate.
1 Remove the battery
compartment lid from the back
of the laser unit using the tab
at the bottom.
3 Place the top of the battery lid
into the recess in the laser unit
and push the lid tab down to
secure in place.
2 Insert 2 x AAA batteries in
the correct direction indicated
by the embossing inside the
battery compartment.
2. CONTROLS 3. DIGITAL DISPLAY
OPERATION
Reference Point Icon
Switching On and Off
Measuring Button
Changing Operating Modes
Operating Mode Icon
Battery Charge Indicator
Measurement Value
Changing the Reference Point
1 To turn the unit on, press the
on/off Button
Once the unit is turned on, the
on/off & measuring button can
be pressed once to display the
laser pointer to align, then should
be pressed again to take the
measurement.
1 Press the mode & reference
button to cycle through the
numerous operating modes
until the desired mode is
selected.
1 The icon to the right of the
reference icon will indicate the
current operating mode:
• Single distance
• Area
• Volume
• Continuous Minimum
• Continuous Maximum
1 The icon at the top right corner
indicates the charge level of
the batteries.
1 Once a measurement is taken,
the distance will show on the
digital display.
Note: The current and previous
measurements are both displayed
on screen.
1 Press and hold the mode &
reference button down until
the reference point changes.
The reference point is where the measurement is measured from. You
can measure from the top or bottom of the laser unit.
2 To turn the unit off, hold the
on/off button down until the
unit turns off.
OFF
OFF
Min/Max
OFF
Min/Max
m
OFF
Min/Max
HOLD
OFF
HOLD
1 When using the of the laser as the Bottom
reference point, the icon shown here will be
displayed in the top left corner.
Note: The height of the tool will be included
in the measurement.
2 When using the of the laser as the Top
reference point, the icon shown here will be
displayed in the top left corner.
Note: The height of the tool will not be
included in the measurement.
WARNING! ENSURE LASER WINDOW IS NOT AT
EYE LEVEL OR DIRECTED TOWARDS OTHERS
WHEN OPERATING.
These modes are explained in the ‘Operating Modes’ section.
Specyfikacje produktu
| Marka: | Ozito |
| Kategoria: | Laserowa woda |
| Model: | LMR-025 |
Potrzebujesz pomocy?
Jeśli potrzebujesz pomocy z Ozito LMR-025, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą
Instrukcje Laserowa woda Ozito
28 Września 2024
28 Września 2024
22 Września 2024
14 Września 2024
5 Września 2024
1 Września 2024
4 Lipca 2024
Instrukcje Laserowa woda
- Laserowa woda Milwaukee
- Laserowa woda Bosch
- Laserowa woda Toolcraft
- Laserowa woda DeWalt
- Laserowa woda Einhell
- Laserowa woda Silverline
- Laserowa woda Hilti
- Laserowa woda Fluke
- Laserowa woda Stabila
- Laserowa woda Craftsman
- Laserowa woda Alpha Tools
- Laserowa woda Laserliner
- Laserowa woda Neo
- Laserowa woda PLS
- Laserowa woda Futech
Najnowsze instrukcje dla Laserowa woda
7 Października 2024
5 Października 2024
3 Października 2024
1 Października 2024
30 Września 2024
26 Września 2024
26 Września 2024
25 Września 2024
24 Września 2024
24 Września 2024