Instrukcja obsługi Ozito DAL-230
Ozito
Laserowa woda
DAL-230
Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Ozito DAL-230 (4 stron) w kategorii Laserowa woda. Ta instrukcja była pomocna dla 2 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek
Strona 1/4
HOLD
ON/OFF
DIGITAL ANGLE FINDER
HOLD
ON/OFF
DIG ITAL ANGLE FIND ER
DIGITAL
ANGLE FINDER
0 - 230°
INSTRUCTION MANUAL
SPECIFICATIONS
Power: 9V DC Battery
Measuring Range: 0 - 230°
Ruler Length: 390mm / 14.5”
Resolution (Accuracy): 0.1°
Accuracy: ±0.5°
Operating Temperature: 0 - 50°C
Weight: 0.385kg
DAL-230
STANDARD EQUIPMENT
IN ORDER TO MAKE A CLAIM UNDER THIS
WARRANTY YOU MUST RETURN THE PRODUCT
TO YOUR NEAREST BUNNINGS WAREHOUSE WITH
YOUR BUNNINGS REGISTER RECEIPT. PRIOR TO
RETURNING YOUR PRODUCT FOR WARRANTY
PLEASE TELEPHONE OUR CUSTOMER SERVICE
HELPLINE:
Australia 1800 069 486
New Zealand 0508 069 486
3 YEAR REPLACEMENT WARRANTY
Your product is guaranteed for a period of 36 months from the
original date of purchase. If a product is defective it will be replaced
in accordance with the terms of this warranty. Warranty excludes
consumable parts, for example: valve adapters and accessories.
WARNING! The following actions will result in the warranty
being void.
• If the tool has been operated on a supply voltage other than that
specified on the tool.
• If the tool shows signs of damage or defects caused by or
resulting from abuse, accidents or alterations.
• Failure to perform maintenance as set out within the instruction
manual.
• If the tool is disassembled or tampered with in any way.
• Professional, industrial or high frequency use.
WARRANTY
TO ENSURE A SPEEDY RESPONSE PLEASE
HAVE THE MODEL NUMBER AND DATE OF
PURCHASE AVAILABLE. A CUSTOMER SERVICE
REPRESENTATIVE WILL TAKE YOUR CALL AND
ANSWER ANY QUESTIONS YOU MAY HAVE
RELATING TO THE WARRANTY POLICY OR
PROCEDURE.
OZITO Australia/New Zealand (Head Office) 1-23 Letcon Drive, Bangholme, Victoria, Australia 3175.
ozito.com.au
Digital Angle Finder
9V Battery
0720
GENERAL POWER TOOL SAFETY WARNINGS
BATTERY & ANGLE FINDER WARNINGS
WARNING! Read all safety warnings and all
instructions. Failure to follow the warnings and instructions
may result in electric shock, re and/or serious injury.
Save all warnings and instructions for future reference. The
term “power tool” in the warnings refers to your mains-operated (corded)
power tool or battery-operated (cordless) power tool.
1. Work area safety
a. Keep work area clean and well lit. Cluttered or dark areas invite
accidents.
b. Do not operate power tools in explosive atmospheres, such as
in the presence of ammable liquids, gases or dust. Power tools
create sparks which may ignite the dust or fumes.
c. Keep children and bystanders away while operating a power tool.
Distractions can cause you to lose control.
2. Electrical safety
a. Power tool plugs must match the outlet. Never modify the plug in
any way. Do not use any adapter plugs with earthed (grounded)
power tools. Unmodied plugs and matching outlets will reduce risk of
electric shock.
b. Avoid body contact with earthed or grounded surfaces, such as
pipes, radiators, ranges and refrigerators. There is an increased risk
of electric shock if your body is earthed or grounded.
c. Do not expose power tools to rain or wet conditions. Water entering
a power tool will increase the risk of electric shock.
d. Do not abuse the cord. Never use the cord for carrying, pulling or
unplugging the power tool. Keep cord away from heat, oil, sharp
edges or moving parts. Damaged or entangled cords increase the risk
of electric shock.
e. When operating a power tool outdoors, use an extension cord
suitable for outdoor use. Use of a cord suitable for outdoor use
reduces the risk of electric shock.
3. Personal safety
a. Stay alert, watch what you are doing and use common sense when
operating a power tool. Do not use a power tool while you are tired
or under the inuence of drugs, alcohol or medication. A moment
of inattention while operating power tools may result in serious personal
injury.
b. Use personal protective equipment. Always wear eye protection.
Protective equipment such as dust mask, non-skid safety shoes, hard
hat, or hearing protection used for appropriate conditions will reduce
personal injuries.
c. Prevent unintentional starting. Ensure the switch is in the o-
position before connecting to power source and/or battery pack,
picking up or carrying the tool. Carrying power tools with your nger
on the switch or energising power tools that have the switch on invites
accidents.
d. Remove any adjusting key or wrench before turning the power tool
on. A wrench or a key left attached to a rotating part of the power tool
may result in personal injury.
e. Do not overreach. Keep proper footing and balance at all times.
This enables better control of the power tool in unexpected situations.
f. Dress properly. Do not wear loose clothing or jewellery. Keep your
hair, clothing and gloves away from moving parts. Loose clothes,
jewellery or long hair can be caught in moving parts.
g. If devices are provided for the connection of dust extraction and
collection facilities, ensure these are connected and properly used.
Use of dust collection can reduce dust-related hazards.
h. Do not let familiarity gained from frequent use of tools allow you
to become complacent and ignore tool safety principles. A careless
action can cause severe injury within a fraction of a second.
4. Power tool use and care
a. Do not force the power tool. Use the correct power tool for your
application. The correct power tool will do the job better and safer at
the rate for which it was designed.
b. Do not use the power tool if the switch does not turn it on and o.
Any power tool that cannot be controlled with the switch is dangerous
and must be repaired.
c. Disconnect the plug from the power source and/or the battery pack
from the power tool before making any adjustments, changing
accessories, or storing power tools. Such preventive safety
measures reduce the risk of starting the power tool accidentally.
d. Store idle power tools out of the reach of children and do not allow
persons unfamiliar with the power tool or these instructions to
operate the power tool. Power tools are dangerous in the hands of
untrained users.
e. Maintain power tools. Check for misalignment or binding of moving
parts, breakage of parts and any other condition that may aect the
power tool’s operation. If damaged, have the power tool repaired before
use. Many accidents are caused by poorly maintained power tools.
f. Keep cutting tools sharp and clean. Properly maintained cutting tools
with sharp cutting edges are less likely to bind and are easier to control.
g. Use the power tool, accessories and tool bits etc. in accordance
with these instructions, taking into account the working conditions
and the work to be performed. Use of the power tool for operations
dierent from those intended could result in a hazardous situation.
h. Keep handles and grasping surfaces dry, clean and free from oil
and grease. Slippery handles and grasping surfaces do not allow for
safe handling and control of the tool in unexpected situations.
5. Service
a. Have your power tool serviced by a qualied repair person using
only identical replacement parts. This will ensure that the safety of
the power tool is maintained.
WARNING! The appliance is not to be used by
persons (including children) with reduced physical,
sensory or mental capabilities, or lack of experience and
knowledge, unless they have been given supervision or instruction.
Young children should be supervised to ensure that they do not play
with the appliance.
1. Do not store or use the tool and battery pack in locations where the
temperature may reach or exceed 40
0C (such as inside sheds or
metal buildings in summer).
2. Do not incinerate the battery pack even if it is seriously damaged or is
completely worn out. The battery can explode in a re.
3. The battery cover may be a choking hazard for children and pets.
Keep away from children and animals.
4. Do not break open the battery as it may explode in re.
5. The included battery is non-rechargeable.
The benefits provided under this warranty are in addition to other
rights and remedies which are available to you at law.
Our goods come with guarantees that cannot be excluded at law. You
are entitled to a replacement or refund for a major failure and for
compensation for any other reasonably foreseeable loss or damage.
You are also entitled to have the goods repaired or replaced if the
goods fail to be of acceptable quality and the failure does not amount
to a major failure.
Generally you will be responsible for all costs associated with a claim
under this warranty, however, where you have suffered any additional
direct loss as a result of a defective product you may be able to claim
such expenses by contacting our customer service helpline above.
ONLINE MANUAL
Scan this QR Code with
your mobile device to take
you to the online manual.
HOLD
ON/OFF
HOLD
HOLD
ON/OFF
DIGITAL ANGLE FINDER
Installing Batteries
The angle meter requires a 9V battery to operate.
1. Press in the tab and lift o the
battery compartment lid.
2. Attach the battery terminals
to the battery ap and then
tuck the battery into the
compartment. Ensure the
wires are not crimped or bent.
Note: Placing the ribbon under
the battery makes it easier
to remove when the battery
requires replacing.
3. Replace the battery
compartment lid.
Low Battery Indicator
When the low battery icon
appears, the battery is at
low charge and needs to be
replaced.
1. Angle Value
2. ‘HOLD’ Icon
3. Backlight Button
4. Datahold Button
5. On/O Button
6. Low Battery Icon
7. Angle Lock
8. Hanging Hole
9. Measuring Arm
10. Ruler Markings
11. Battery Compartment
12. Digital Display
13. Horizontal Spirit Level
14. Vertical Spirit Level
DIGITAL ANGLE FINDER
KNOW YOUR PRODUCT
1. BATTERIES
SETUP & PREPARATION
9V
HOLD
ON/OFF
RIBBON
1 2 3 4
5
11
6
14
13
12
7
9
10
8
Switching The Unit On & O
1. Press the on/o button to
switch the meter on.
2. Press the on/o button again
to switch the unit o.
Note: The unit will automatically
switch o after 5 minutes of
inactivity.
Backlight
Press the backlight button to
toggle the function on or o.
Datahold Function
1. Press the hold button to lock
the angle measurement on
screen. The ‘HOLD’ icon will
appear on the display.
Note: Adjusting the measuring
arm with the hold function on will
not change the value on screen.
2. Press the hold button again to resume taking measurements.
Note: The ‘HOLD’ icon
will disappear and the
value displayed will update
according to the position of the
measurement arm.
Locking The Measuring Arm
1. Turn the angle knob anti-
clockwise to loosen it.
2. Adjust the measuring arm as
necessary.
3. Turn the angle knob clockwise
to hold the measuring arm in
position.
Using The Spirit Levels
The unit can also be used as a level.
1. Place the angle level on the surface.
2. Adjust the surface until the bubbles are directly in the centre of the
spirit tubes.
2. CONTROLS
OPERATION
HOLD
ON/OFF
HOLD
ON FF
HOLD
HOLD
ON/OF F
DIGI TAL ANG LE FINDER
HOLD
ON/OFF
DIGITAL ANGLE FINDER
HOLD
ON/OFF
HOLD
HOLD
ON/OFF
HOLD
DAL-230
Specyfikacje produktu
| Marka: | Ozito |
| Kategoria: | Laserowa woda |
| Model: | DAL-230 |
Potrzebujesz pomocy?
Jeśli potrzebujesz pomocy z Ozito DAL-230, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą
Instrukcje Laserowa woda Ozito
28 Września 2024
28 Września 2024
22 Września 2024
14 Września 2024
5 Września 2024
5 Września 2024
4 Września 2024
1 Września 2024
4 Lipca 2024
Instrukcje Laserowa woda
- Laserowa woda Milwaukee
- Laserowa woda Bosch
- Laserowa woda Toolcraft
- Laserowa woda DeWalt
- Laserowa woda Einhell
- Laserowa woda Silverline
- Laserowa woda Hilti
- Laserowa woda Fluke
- Laserowa woda Stabila
- Laserowa woda Craftsman
- Laserowa woda Alpha Tools
- Laserowa woda Laserliner
- Laserowa woda Neo
- Laserowa woda PLS
- Laserowa woda Futech
Najnowsze instrukcje dla Laserowa woda
7 Października 2024
5 Października 2024
3 Października 2024
1 Października 2024
30 Września 2024
26 Września 2024
26 Września 2024
25 Września 2024
24 Września 2024
24 Września 2024