Instrukcja obsługi Ozito SDR-050
Ozito
Laserowa woda
SDR-050
Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Ozito SDR-050 (6 stron) w kategorii Laserowa woda. Ta instrukcja była pomocna dla 2 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek
Strona 1/6
STUD
DETECTOR
50mm Max Depth
INSTRUCTION MANUAL
SPECIFICATIONS
Battery: 9V DC Battery
Detection Depth: 19mm (Wood, Metal)
50mm (Ferrous Metal)
38mm (Copper)
50mm (Live Wires)
Weight: 135g
SDR-050
WHAT’S IN THE BOX
Stud Detector
9V Battery
IN ORDER TO MAKE A CLAIM UNDER THIS
WARRANTY YOU MUST RETURN THE PRODUCT
TO YOUR NEAREST BUNNINGS WAREHOUSE WITH
YOUR BUNNINGS REGISTER RECEIPT. PRIOR TO
RETURNING YOUR PRODUCT FOR WARRANTY
PLEASE TELEPHONE OUR CUSTOMER SERVICE
HELPLINE:
Australia 1800 069 486
New Zealand 0508 069 486
3 YEAR REPLACEMENT WARRANTY
Your product is guaranteed for a period of 36 months from the
original date of purchase and is intended for DIY (Do It Yourself)
use only. If a product is defective it will be replaced in accordance
with the terms of this warranty. Lithium Ion batteries are covered
by a 12 month warranty. Warranty excludes consumable parts.
WARNING
The following actions will result in the warranty being void.
• If the tool has been operated on a supply voltage other
than that specified on the tool.
• If the tool shows signs of damage or defects caused
by or resulting from abuse, accidents or alterations.
• Failure to perform maintenance as set out within the
instruction manual.
• If the tool is disassembled or tampered with in any way.
WARRANTY
TO ENSURE A SPEEDY RESPONSE PLEASE
HAVE THE MODEL NUMBER AND DATE OF
PURCHASE AVAILABLE. A CUSTOMER SERVICE
REPRESENTATIVE WILL TAKE YOUR CALL
AND ANSWER ANY QUESTIONS YOU MAY
HAVE RELATING TO THE WARRANTY POLICY
OR PROCEDURE.
OZITO Australia/New Zealand (Head Office) 1-23 Letcon Drive, Bangholme, Victoria, Australia 3175.
The benefits provided under this warranty are in addition
to other rights and remedies which are available to you at law.
Our goods come with guarantees that cannot be excluded
at law. You are entitled to a replacement or refund for a major
failure and for compensation for any other reasonably foreseeable
loss or damage. You are also entitled to have the goods repaired
or replaced if the goods fail to be of acceptable quality and the
failure does not amount to a major failure.
Generally you will be responsible for all costs associated with
a claim under this warranty, however, where you have suffered
any additional direct loss as a result of a defective product you
may be able to claim such expenses by contacting our customer
service helpline above.
ozito.com.au
0317
9V
ONLINE MANUAL
Scan this QR Code with your
mobile device to take you to
the online manual.
9V
5 Battery 9V
KNOW YOUR PRODUCT SETUP & PREPARATION
1. INSTALLING BATTERIES
1 Digital Display
2 Mode Buttons
3 On/Off Button
4 Detection Button
STUD DETECTOR
ACCESSORIES
1
2
3
4
5
The Stud Detector unit requires a 9V battery to operate.
1 Remove the battery
compartment lid from the back
of the unit using the tab at the
top.
3 Place the bottom of the battery
lid into the recess in the unit
and push the lid tab down to
secure in place.
2 Attach the 9V battery to the
battery clip in the correct
direction so that it clicks into
place.
9V
2. CONTROLS 3. CALIBRATION
OPERATION
Switching On and Off
Mode Selection
Detection Button
1 To turn the unit on, press the
on/off Button
The directional mode buttons
allows you to select between the
4 operational modes.
Note: An arrow is displayed at
the bottom of the digital display,
indicating the current mode.
Stud detection mode:
For metallic and non-metallic materials (wood, metal, etc.)
• Wood max. detection depth: 19mm
• Metal max. detection depth: 19mm
Metal detection mode:
For ferrous materials and copper piping
• Ferrous Metal max. detection depth: 50mm
• Copper max. detection depth: 24mm
Deep detection mode:
For copper piping, metal, wood
• Wood max. detection depth: 19mm
• Metal max. detection depth: 38mm
• Copper max. detection depth: 38mm
AC detection mode:
For live cables (power cords, network cables, etc.)
• Max. detection depth: 50mm
1 The detection button is used
to calibrate and start detecting
objects.
The stud detector needs to be calibrated for the characteristics of the
search area before each measurement.
Note: Calibrations needs to be repeated every 60 seconds in order to
reduce the occurrence of measuring errors.
1 Turn the unit on by pressing
the on/off button.
3 Select an area of the surface
that is less likely of nding
the material you are trying to
locate.
2 Hold the back of the stud
detector against the surface.
4 Press and hold the detection
button to allow the detector
to calibrate correctly. The
calibration is complete when
you hear 3 beeps.
2 To turn the unit off, press the
on/off button again.
Note: The unit will automatically
turn off after 60 seconds of
inactivity.
STUD METAL DEEP AC
STUD METAL DEEP AC
STUD METAL DEEP AC
Specyfikacje produktu
| Marka: | Ozito |
| Kategoria: | Laserowa woda |
| Model: | SDR-050 |
Potrzebujesz pomocy?
Jeśli potrzebujesz pomocy z Ozito SDR-050, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą
Instrukcje Laserowa woda Ozito
28 Września 2024
28 Września 2024
22 Września 2024
14 Września 2024
5 Września 2024
1 Września 2024
4 Lipca 2024
Instrukcje Laserowa woda
- Laserowa woda Milwaukee
- Laserowa woda Bosch
- Laserowa woda Toolcraft
- Laserowa woda DeWalt
- Laserowa woda Einhell
- Laserowa woda Silverline
- Laserowa woda Hilti
- Laserowa woda Fluke
- Laserowa woda Stabila
- Laserowa woda Craftsman
- Laserowa woda Alpha Tools
- Laserowa woda Laserliner
- Laserowa woda Neo
- Laserowa woda PLS
- Laserowa woda Futech
Najnowsze instrukcje dla Laserowa woda
7 Października 2024
5 Października 2024
3 Października 2024
1 Października 2024
30 Września 2024
26 Września 2024
26 Września 2024
25 Września 2024
24 Września 2024
24 Września 2024