Instrukcja obsługi Omega Speedmaster HB-SIA

Omega zegarek Speedmaster HB-SIA

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Omega Speedmaster HB-SIA (2 stron) w kategorii zegarek. Ta instrukcja była pomocna dla 17 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF

Strona 1/2

1 / 2

SPEEDMASTER

HB-SIA CO-AXIAL GMT CHRONOGRAPH NUMBERED EDITION 44.25MM

Titanium on titanium

Caliber

3603 321.90.44.52.01.001

VCo-Axial escapement

lAutomatic

UChronometer

iTime zone function

jSecond time zone

ZTachymeter

oSapphire crystal

tAnti-reﬂective treatment on both sides

CNumbered Edition

G3-year International Warranty

TWater-Resistant to a relative pressure of 10 bar

(100 metres/330 feet)

WATCH FUNCTIONS

The crown has 3 positions:

1. Normal position (wearing position): when the crown is positioned against the

case, the crown ensures that the watch is water-resistant.

Occasional winding: if the watch has not been worn for 55 hours or more, wind it

up with the crown in position 1.

2. Setting the time zone and correcting the date: pull the crown out to position

2. Turn the crown forwards or backwards, and only the hour hand will move

forwards or backwards by 1-hour intervals. By passing the hour hand over

midnight, the date can be changed forwards or backwards. Push the crown back

to position 1.

Synchronisation of the hour hand and the ’24-hour’ hand

Pull the crown out to position 2 and turn it to synchronise the hour hand with the

time indicated by the ’24-hour’ hand on the 24-hour scale in the centre of the

dial. Make sure you set the hour hand in the correct half of the day!

After synchronising the hour hand with the ’24-hour’ hand, you must set the local

time on your watch. Push the crown back to position 1.

3. Time setting: 24 hours - hours – minutes – seconds. Pull the crown out to

position 3. The seconds hand will stop. Turn the crown forwards or backwards.

Synchronise the seconds by pushing the crown back to position 1 to coincide with

a given time signal.

SECOND TIME ZONE

Thanks to the ’24-hour’ hand with its triangular point, travellers can read the time

back home at a glance on the 24-hour scale at the centre of the dial.

2 / 2

CHRONOGRAPH FUNCTIONS

• Pusher A: start – stop, start – stop, etc.

Timing to 1/8 of a second for up to 12 hours.

• Pusher B: reset (after a stop).

Note: resetting/zeroing of the sub dials must only be carried out after the

chronograph has stopped. Never push the chronograph’s two pushers (A and B)

simultaneously.

TACHYMETRIC SCALES

The desired information is read between the central seconds hand of the

chronograph and the corresponding scale, over a maximum duration of 60

seconds.

Example: calculating the speed of a car.

Record the time the car takes to cover a distance of 1 kilometre. Read off the

tachymetric scale the speed indicated by the central seconds hand. In this case,

the car is travelling at 120 km/h.

Specyfikacje produktu

Marka:	Omega
Kategoria:	zegarek
Model:	Speedmaster HB-SIA
Materiał obudowy:	Tytan
Wodoodporny:	Tak
Typ mechanizmu:	Mechanical (auto winding), Mechanical (hand winding)
Chronograf:	Tak
Typ zegarka:	Zegarek na rękę
Kolor obudowy:	Black, Dark metallic
Tworzywo paska:	Tytan
Kolor główny paska:	Ciemny metallic
Kształt koperty:	Okrągły
Kolor tarczy zegarka:	Czarny
Styl oznaczenia godzin i minut:	Liczby arabskie
Tryb zegarka:	24h
Głębokość wodoszczelności:	100 m
Typ szkła:	Kryształowe
Dedykowana płeć:	Męski
Kolor oznaczenia godzin i minut:	Biały
Średnica obudowy:	44.25 mm
Wodoszczelność:	10 ATM
Chronometr:	Tak
Model mechanizmu:	3603
Szkło odporne na zarysowania:	Tak
Powłoka nieodbijająca światła:	Tak
Producent mechanizmu:	Omega
Tachymetr:	Tak
Rezerwa mocy:	52 h
Współosiowy wychwyt:	Tak