Instrukcja obsługi Mikrotik GPEN11

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Mikrotik GPEN11 (5 stron) w kategorii Schakelaar. Ta instrukcja była pomocna dla 3 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/5
GPEN11
This device allows powering a PoE capable device over the Ethernet,
using the same voltage, as provided with the DC input jack.
Powering
The device accepts power from direct-input power jack (5.5 mm
outside and 2 mm inside, female, pin positive plug) 12-57 V DC.
Power output
The device supports PoE out from Ethernet port located under the
cover. You can power Mikrotik devices which supports passive powering
through Ethernet.
Mounting
Step 1:
1. Remove the cover screw using PH2 screwdriver;
2. Remove cover to access mounting points.
Step 2:
1. Drill holes using drill bid;
2. Insert dovels if needed;
3. Attach the unit to the wall, using wall and secure with screws.
Step 1. Step 2.
See mikrotik.com/products for the latest version of this document. Page 1, Document #46507 Modified on: 29.OCT.2019
Step 3:
1. Plug in the Ethernet cable going to the unit that will be powered;
2. Plug in power source for the GPEN.
* Outgoing Ethernet cable can be guided through position A, or B for cable leading into the wall.
Step 4:
1. Re-attach cover;
2. Secure cover using the screw;
3. Use the sticker to cover the screw location.
Step 3. Step 4.
When mounting on the wall, please ensure that cable feed is pointing downwards.
The IPX rating scale of this device is IPX0. We recommend using Cat6 shielded cables.
Accessories
Package includes the following accessories that come with the device:
K-62 screw kit
Specifications
For more information about this product, specifications, pictures, downloads please visit our web page:
https://mikrotik.com/product/gpen11
See mikrotik.com/products for the latest version of this document. Page 2, Document #46507 Modified on: 29.OCT.2019
Federal Communication Commission Interference Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15
of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a
residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the equipment off and on, the user
is encouraged to try to correct the interference by one of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could
void the user’s authority to operate this equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This
device may not cause harmful interference, and (2) this device must accept any interference received, including
interference that may cause undesired operation.
Note: This unit was tested with shielded cables on the peripheral devices. Shielded cables must be used with the
unit to ensure compliance.
Industry Canada
This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following
two conditions: (1) this device may not cause interference, and (2) this device must accept any interference,
including interference that may cause undesired operation of the device.
Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence.
L'exploitation est autorisée aux deux conditions suivantes: (1) l'appareil ne doit pas produire de brouillage, et (2)
l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en
compromettre le fonctionnement.
See mikrotik.com/products for the latest version of this document. Page 3, Document #46507 Modified on: 29.OCT.2019

Specyfikacje produktu

Marka: Mikrotik
Kategoria: Schakelaar
Model: GPEN11

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Mikrotik GPEN11, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje Schakelaar Mikrotik

Mikrotik

Mikrotik GPEN21 Instrukcja

8 Października 2024
Mikrotik

Mikrotik GPEN11 Instrukcja

8 Października 2024

Instrukcje Schakelaar

Najnowsze instrukcje dla Schakelaar

Cudy

Cudy GS1008PS2 Instrukcja

8 Października 2024
Cudy

Cudy GS1010PS2 Instrukcja

8 Października 2024
Cudy

Cudy GS1010P Instrukcja

8 Października 2024
Cudy

Cudy GS1026PS2 Instrukcja

8 Października 2024
Cudy

Cudy GS1005PTS1 Instrukcja

8 Października 2024
Equip

Equip 607611 Instrukcja

7 Października 2024
Equip

Equip 607610 Instrukcja

7 Października 2024
TP-Link

TP-Link TL-SG1016S Instrukcja

7 Października 2024
PureLink

PureLink PT-MA-HD44DA Instrukcja

7 Października 2024
Totolink

Totolink SG16 Instrukcja

7 Października 2024