Instrukcja obsługi APC AP7532


Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla APC AP7532 (1 stron) w kategorii przełącznik. Ta instrukcja była pomocna dla 2 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/1
*990-2395*
990-2395 05/2005
Addendum — Rack PDU
Circuit Breaker Operation
How to reset a mid-tripped circuit breaker
The circuit breaker is at a mid-trip state when the
actuator is partially extended from the circuit
breaker, but not fully extended, as if it had been
turned off manually. Pushing the actuator in while
in mid-trip state will not reset the breaker. The
circuit breaker needs to be fully extended before it
can be reset. To fully extend the circuit breaker:
1. Insert a small slotted screwdriver or other tool
into the hole located above the word “OFF”.
2. Push the lower part of the actuator in gently
until the upper part “clicks” out.
How to reset a circuit breaker
The circuit breaker is ready to be reset when the
actuator is fully extended. Quickly and forcefully
push the circuit breaker actuator into the PDU to
reset the breaker.
pdu0346a
Note
Before resetting the circuit breaker you
should determine the cause of the fault
and remedy the fault before resetting
the circuit breaker. If the fault is not
removed, the breaker will trip again as
soon as it is reset.
pdu0345a


Specyfikacje produktu

Marka: APC
Kategoria: przełącznik
Model: AP7532

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z APC AP7532, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje przełącznik APC

APC

APC AP7532 Instrukcja

10 Marca 2025
APC

APC AP5615 Instrukcja

31 Sierpnia 2024
APC

APC AP5602 Instrukcja

29 Sierpnia 2024
APC

APC AP5201 Instrukcja

23 Sierpnia 2024

Instrukcje przełącznik

Najnowsze instrukcje dla przełącznik