Instrukcja obsługi Joranalogue Fold 6


Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Joranalogue Fold 6 (5 stron) w kategorii nieskategoryzowany. Ta instrukcja była pomocna dla 11 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/5
FOLD 6
MULTI-TOPOLOGY
WAVEFOLDER
1
INTRODUC TIO N
Often considered to be the opposite of filters
within a modular system, wavefolders are
designed to fold a signal over itself multiple
times. This generates additional harmonics,
resulting in rich timbres.
While there is a bewildering array of filter types
within the synthesiser world, most wavefolders
fall within only a few categories. Diode
wavefolders in particular come in just two
variants: series and parallel circuit topologies.
Choosing a specific folder also means being
limited to specific sounds and capabilities.
For the first time, Fold 6-6 puts forward a stage
hybrid series/parallel topology, yielding a greater
sonic palette than ever in just 4 HP. Having both
main (series) and alternate (parallel) outputs
means a single module now gives access to just
about all wavefolding tones . imaginable
To take things even further, an integrated
symmetrical soft clipper limits the output signals
to approximately 10 Vpp, keeping the amplitude
within typical Eurorack levels and making it
easier to create overdriven sounds at high fold
ratios. This clipping stage can be driven
continuously using the shape parameter,
smoothly transforming the folded waveforms
into pulse waves for even more harmonic
content.
Two signal inputs are included, to mix audio
signals or add in a DC voltage for asymmetric
folding. The symmetry can also be manually
controlled using the dedicated knob. Of course,
both fold and shape parameters feature voltage
control, to enable continuous timbral
modulation.
Moving beyond simple signal processing, Fold 6
also lends itself perfectly for feedback patching,
CV folding or frequency multiplication; its
modest withinsize belies the sonic capabilities .
CONTENTS
In the Fold 6 box, you’ll find:
Product card, stating serial number and
production batch.
16- -10-to pin Eurorack power cable.
Mounting hardware: two black M3 x 6 mm
hex screws, two black nylon washers and a
hex key.
T 6 he Fold module itself, in a protective
cotton bag.
If any of these items are missing, please contact
your dealer or support@joranalogue.com.
FOLD 6
MULTI-TOPOLOGY
WAVEFOLDER
2
CONTROL S & CONNECTIONS
1 K FOLD NOB
The 6-stage wavefolder is preceded by a linear
voltage controlled amplifier (VCA), controlled by
the fold parameter. As the signal amplitude
going into the wavefolder increases, more fold
stages are engaged, resulting in more folds and
thus more harmonics being generated.
2 SHAPE KNOB
The wavefolding section feeds into an overdrive
circuit. At the minimum setting of the shape
parameter, it is essentially disabled and classic
wavefolder tones are the result. As the circuit is
driven harder, folded continuous waveforms
such as sine and triangle waves are gradually
shaped into pulses, creating a harsher sound.
3 SYMMETRY KNOB
The symmetry knob adds a manually variable DC
offset to the signal inputs, ranging from −5 V to
+5 V. This can be used to achieve asymmetric
wavefolding, with either the positive or negative
part of the waveform being folded more than the
other, by turning it away from the centre
position. This knob can also be used re-centre the
wavefolder if there already is a DC offset present
in the . input signal(s)
4 SIGNAL INPUTS
Connect the signal(s) to be folded here. These
identical inputs are mixed together, which can
simplify certain patches as it often removes the
need for a separate mixer module. As the entire
signal path is DC-coupled, CV as well as audio
can be processed. These two signal types can
even , be combined for variable symmetry audio
wavefolding.
FOLD 6
MULTI-TOPOLOGY
WAVEFOLDER
3
5 FOLD INPUT
The fold CV input provides voltage control linear
over the input VCA. The exact number of fold
stages being engaged depends on the
amplitude of the input signal(s). While the knob
range is restricted to +5 V for optimal control, it is
possible to drive the wavefolder even harder
using external control voltages.
6 SHAPE INPUT
The shape CV input provides voltage control over
the overdrive circuit. With the shape knob at the
minimum setting, the response is no drive at 0 V,
to maximum drive at +5 Negative voltages will V.
result in attenuation, allowing the shape CV to be
used for output amplitude control as well.
7 MAIN OUTPUT
This output provides the most classic
wavefolding action, as found in earlier designs
utilising the ‘series’ circuit topology.
Unlike most wavefolding modules, Fold 6’s
overdrive circuit constrains the output
waveforms to within approximately 5 V and
+5 V. This means the waveforms are always kept
to around the nominal Eurorack amplitude level
of 10 Vpp. It also ensures symmetric clipping once
the final folding stage has been engaged ,
creating a purer sound.
Keep in mind that due to Fold 6’s high -gain
circuitry, some noise and DC offset is to be
expected in the output signals, especially at high
fold and/or shape levels.
8 ALTERNATE OUTPUT
The alternate output simultaneously provides
waveforms such as those from ‘parallel
wavefolders, with fold levels and directions
varying between the different stages, the result
being input a more mellow sound for most
signals.


Specyfikacje produktu

Marka: Joranalogue
Kategoria: nieskategoryzowany
Model: Fold 6
Kolor produktu: Biały
Typ kontroli: Buttons,Rotary
Wbudowany wyświetlacz: Tak
Typ wyświetlacza: LCD
Położenie urządzenia: Wolnostojący
Wysokość produktu: 850 mm
Szerokość produktu: 600 mm
Głębokość produktu: 600 mm
Waga produktu: 76000 g
Szerokość opakowania: 640 mm
Wysokość opakowania: 920 mm
Głębokość opakowania: 685 mm
Kolor drzwiczek: Srebrny
Funkcja AquaStop: Tak
Ilość programów piorących: 23
Technologia przetworników: Nie
Pół wsadu: Tak
Pobór wody na cykl: 56 l
Wskaźnik pozostałego czasu: Tak
Zabezpieczenie przed dziećmi: Tak
Klasa efektywności energetycznej (stara): A+++-10%
Pranie zużywające energię: 0.72 kWh
Typ ładowania: Od przodu
Zawias drzwiczek: Lewy
Technologia napędu bezpośredniego: Nie
Pojemność znamionowa: 8 kg
Maksymalna prędkość obrotu: 1200 RPM
Klasa wirowania (suszenia): B
Poziom hałasu (pranie): 58 dB
Pozostała wilgoć: 53 %
Poziom hałasu (wirowanie): 69 dB
Programy prania: Hygiene/anti-allergy,Black,Cotton,Eco,Hand,Wool,Night,Quick,Sport,Synthetics
Pojemność bębna: 64 l
Czas cyklu (max): 186 min
Regulowana prędkość obrotów: Tak
Zabezpieczenie przed przepełnieniem: Tak
Roczne zużycie energii pranie: 166 kWh
Roczne zużycie wody pranie: 11280 l
Waga wraz z opakowaniem: 78000 g
Tworzywo bębna: Stal nierdzewna
Oświetlenie wnętrza bębna: Tak
Kąt otwierania drzwi: 180 °
funkcja Rinse Plus: Tak
Zakres otwierania drzwiczek (średnica): 340 mm

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Joranalogue Fold 6, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje nieskategoryzowany Joranalogue

Instrukcje nieskategoryzowany

Najnowsze instrukcje dla nieskategoryzowany

Asko

Asko DBI644MIB.S.TW/1 Instrukcja

28 Października 2024
Asko

Asko DFS233IB.S.TW/1 Instrukcja

28 Października 2024
Emko

Emko EZM-9920 Instrukcja

27 Października 2024
Emko

Emko ESM-3712-H Instrukcja

27 Października 2024
Emko

Emko ATS-10 Instrukcja

27 Października 2024
Emko

Emko EAOM-11.2 Instrukcja

27 Października 2024
Emko

Emko EPM-3790 Instrukcja

27 Października 2024
Emko

Emko EPM-7790 Instrukcja

27 Października 2024
Livarno Lux

Livarno Lux IAN 108340 Instrukcja

27 Października 2024
Livarno Lux

Livarno Lux HG06009A-BS Instrukcja

27 Października 2024