Instrukcja obsługi Joranalogue Dim 2

Joranalogue nieskategoryzowany Dim 2

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Joranalogue Dim 2 (4 stron) w kategorii nieskategoryzowany. Ta instrukcja była pomocna dla 3 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF

Strona 1/4

DIM 2

DUAL BNC LAMP DIMMER

INTRODUC TION

For whoever has ever struggled with finding their

way around a Eurorack synthesiser on a dark

stage or a dimly lit studio, Dim 2 presents an

illuminating experience. In just 4 HP, it provides

a complete solution to upgrade your modular

system with a pair of dimmable console lights.

The high efficiency PWM dimmers run at high -

frequency, ensuring flicker free and noise- -free

operation. Additionally, extensive line filtering

keeps your Eurorack power supply happy and

clean.

Not limited to just manual control, both

dimmers also feature control voltage (CV) inputs,

turning the connected lamps from simple light

sources to voltage controlled audio-visual

spectacles.

While the use of the included BNC LED lamps is

recommended in order to keep power

consumption low, halogen lamps may be used

as well. Provided your power supply is beefy

enough, up to 6 W of power may be drawn from

each output. This even makes it possible to drive

12 V LED strips, truly making your patches shine

bright.

CONTENTS

In the Dim 2 box, you’ll find:

 Product card, stating serial number and

production batch.

 16- - -to 10 pin Eurorack power cable.

 Mounting hardware: two black M3 x 6 mm

hex screws, two black nylon washers and a

hex key.

 Two BNC LED gooseneck lamps, in a

protective cotton bag.

 T 2 he Dim module itself, in a protective

cotton bag.

If any of these items are missing, please contact

your dealer or support@joranalogue.com.

DIM 2

DUAL BNC LAMP DIMMER

CONTROL S & C ONNECTIONS

1 BNC LAMP OUTPUTS

The two outputs each provide up to 6BNC W of

power, PWM- dimmable between 0 V and +12 V.

To connect a lamp, first line its connector up with

the notches on the socket, then rotate it

clockwise by 90º until the BNC connector locks

in place. the BNC To release a lamp, push

connector towards the front panel and then

rotate it anticlockwise by 90º.

Use of the included LED lamps is recommended.

However, it is possible to connect any standard

BNC lamp, including halogen types. Note that

some aftermarket LED BNC lamps are not

dimmable, although they can be used normally

when the dimmer knob is set to 100 %.

BNC adapters can be used to connect led strips

and other 12 . V lamps In this case, keep in mind

that all current will be drawn from the system’s

+12 V rail, which should have sufficient power

reserve available.

2 DIMMER KNOBS AND LEDS

Each BNC output has an associated dimmer

knob, which will adjust the lamp’s brightness

from 0 to 100 %. The current status of each

dimmer is displayed on the adjacent LED.

When using any of the CV inputs, the

corresponding knob becomes an attenuator for

the incoming CV signal.

3 DIMMER CV INPUTS

These input sockets are used to provide direct

voltage control over the brightness of the lamps,

with a range of 0 when the V V to +5

corresponding knob is set to its maximum

setting. When the B input socket is not used, it

will receive its CV from input A.

CAUTION: rapidly flashing lights may trigger

seizures in people with photosensitive

epilepsy.

DIM 2

DUAL BNC LAMP DIMMER

SPECIFI CATIONS

Modul

ModulModule forma

e forma

e formae format

Doepfer A-100 ‘Eurorack’ compatible module

3 4 30 U, HP, mm deep (inc. power cable)

Milled 2 mm aluminium front panel with non-

erasable graphics

Maxi

MaxiMaximum curre

mum curre

mum curremum current

nt nt draw

draw

drawdraw

+12 V: 150 mA (with included LED lamps)

+12 V: 1000 mA (at maximum load)

− 5 12 V: mA

Power

PowerPower pr

prprotecti

otecti

otectiotection

onon

R everse polarity (MOSFET)

Independent output overcurrent protection

I/O impedanc

I/O impedancI/O impedance

All inputs: 100 kΩ

Outer di

Outer diOuter dimensions (H

mensions (H

mensions (Hmensions (H x W x D)

x W x D)

x W x D) x W x D)

128.5 x 20 x 43 mm

Mass

MassMass

Module: 55 g

Including packaging and accessories: 270 g

SUPPORT

As all Joranalogue Audio Design products, Dim 2

is designed, manufactured and tested with the

highest standards, to provide the performance

and reliability music professionals expect.

In case your module isn’t functioning as it should,

make sure check your Eurorack power supply to

and all connections first.

If the problem persists, contact your dealer or

send an email to support@joranalogue.com.

Please mention your serial number, which can be

found on the product card or on the module’s

rear side.

Specyfikacje produktu

Marka:	Joranalogue
Kategoria:	nieskategoryzowany
Model:	Dim 2
Kolor produktu:	Czarny
Waga produktu:	3200 g
W zestawie pilot zdalnego sterowania:	Tak
Zasilacz sieciowy:	Tak
Formaty kompresji:	H.264
Liczba kanałów:	16 kan.
Ilość portów Ethernet LAN (RJ-45):	1
Rozdzielczość:	1920 x 1080 px
Skrócona instrukcja obsługi:	Tak
Przewody:	HDMI,UTP
Liczba portów USB 2.0:	2
Ilość portów HDMI:	1
Wymiary produktu (SxGxW):	405 x 315 x 60 mm
Dołączona myszka:	Tak
Wejście audio:	16 x RCA
Obsługiwane protokoły sieciowe:	TCP/IP, PPPoE, DHCP, DNS, DDNS, NTP
Dołączone śruby:	Tak
System formatu sygnału analogowego:	NTSC,PAL
Ilość portów eSATA:	1
Pojemność HDD:	1000 GB
Wyjście audio:	1 x RCA
Interfejs HDD:	druga generacja szeregowej magistrali komputerowej (serial ATA II)
Nalepki ostrzegawcze:	Tak
Szybkość wyświetlania klatek:	30 fps
Wyjścia VGA (D-Sub):	1
Maks. pojemność HDD:	2000 GB
Obsługiwana rozdzielczość:	960H
Wejścia BNC:	16