Instrukcja obsługi Joranalogue Compare 2

Joranalogue nieskategoryzowany Compare 2

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Joranalogue Compare 2 (6 stron) w kategorii nieskategoryzowany. Ta instrukcja była pomocna dla 2 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/6
COMPARE 2
DUAL WINDOW COMPARATOR
1
INTRODUCTI O N
The window comparator is a very useful circuit
building block that is common in general
electronics, but rarely found in modular synths.
While a regular comparator activates when the
input signal voltage is higher than a threshold
level, a window comparator checks if the voltage
is between two levels (these form the 'window').
Compare 2 combines two such comparators and
a logic section in 8 HP. The result is an advanced
tool for extracting gates and pulses from
analogue signals in Eurorack synths.
The detection windows are defined by the shift
and size parameters, which can be varied using
the knobs and control voltage (CV) inputs.
Complementary gate outputs are available, with
big three-colour LEDs showing each
comparator status time.’s -in real
All inputs are normalised from the left section to
the right, but the two comparators can also be
used completely independently. On the bottom,
the gates from both comparators are combined
in various ways by the logic section, which also
features LEDs.
You'll find a use for this truly multi-functional
module in practically any patch, processing
either CV or audio rhythm generator: complex ,
dual pulse width modulator, frequency
multiplier/divider with PWM, digital ‘ring
modulator’ with PWM, dynamic depth VCO
synchronizer, voltage controlled swing, logic
function array with adjustable thresholds… and
many more applications waiting to be
discovered!
CONTE N TS
In the Compare 2 box, you’ll find:
Product card, stating serial number and
production batch.
16- -10- to pin Eurorack power cable.
Mounting hardware: two black M3 x 6 mm
hex screws, two black nylon washers and a
hex key.
T 2 he Compare module itself, in a protective
cotton bag.
If any of these items are missing, please contact
your dealer or support@joranalogue.com.
COMPARE 2
DUAL WINDOW COMPARATOR
2
CONTR OLS & CO NNECTI ONS
1 S HIFT KNOBS
Each of the identical window comparators
features a knob to offset the window’s centre.
The range is −5 V to +5 V in the centre V, with 0
position.
2 SIZE KNOBS
Each comparator also includes a size knob,
which controls the distance between the
window edges, from very small (a few mV) to 10 V
maximum.
3 SHIFT AND SIZE CV INPUTS
The independently windows can be modulated
using these CV inputs. The modulation voltages
are then added to the knob settings to generate
the final detection windows.
The CVs of the left comparator are normalised to
the right, so both comparators can be voltage
controlled together.
Note that both CV inputs can process negative
control voltages as well. In the case of the size
parameter, this can cause the window to
become negative, which simply means the
comparator output active. will never become
4 SIGNAL INPUTS
Connect the analogue signals you want to
extract gates and pulses from to these sockets.
Both CV and audio can be processed. These
sockets are also normalised left to right, so by
default the same signal is sent to both
comparators.
COMPARE 2
DUAL WINDOW COMPARATOR
3
5 COMPARATOR LEDS
Compare 2’s most striking feature are the two
multi-colour LEDs, which visualise the status of
each comparator. They light up blue when the
input voltage is below the window, red when
above and white when inside.
If the window size is negative, and the signal is
within this ‘negative window’, the LED will turn
off rather than turn white.
6 GATE OUTPUTS
When a comparator detects the input signal
inside the window, the corresponding main gate
output OUT, labelled ‘ ’, will be active (+5 V).
Otherwise, it is inactive (0 V).
The NOT output is logically inverted, so it is active
whenever the main output is inactive and vice
versa.
7 LOGIC SECTION OUTPUTS
The outputs from both comparators are sent to
the logic section, where additional signals are
derived. AND will be active only when both
comparators are active, OR when one or both are
active and XOR only when one is active. Rising
edges of the also toggle a flipXOR signal -flop
(‘FF’). All these outputs are +5 V active, 0 V
inactive.
8 LOGIC SECTION LEDS
Each logic output has a corresponding LED
which lights up whenever it is active.

Specyfikacje produktu

Marka: Joranalogue
Kategoria: nieskategoryzowany
Model: Compare 2

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Joranalogue Compare 2, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje nieskategoryzowany Joranalogue

Joranalogue

Joranalogue Cycle 5 Instrukcja

14 Lipca 2024
Joranalogue

Joranalogue Dim 2 Instrukcja

13 Lipca 2024
Joranalogue

Joranalogue Route 4 Instrukcja

13 Lipca 2024
Joranalogue

Joranalogue Contour 1 Instrukcja

13 Lipca 2024
Joranalogue

Joranalogue Compare 2 Instrukcja

13 Lipca 2024
Joranalogue

Joranalogue Fold 6 Instrukcja

13 Lipca 2024
Joranalogue

Joranalogue Generate 3 Instrukcja

13 Lipca 2024
Joranalogue

Joranalogue Select 2 Instrukcja

13 Lipca 2024
Joranalogue

Joranalogue Mix 3 Instrukcja

13 Lipca 2024
Joranalogue

Joranalogue Orbit 3 Instrukcja

13 Lipca 2024

Instrukcje nieskategoryzowany

Najnowsze instrukcje dla nieskategoryzowany

Asko

Asko DBI644MIB.S.TW/1 Instrukcja

28 Października 2024
Asko

Asko DFS233IB.S.TW/1 Instrukcja

28 Października 2024
Emko

Emko EZM-9920 Instrukcja

27 Października 2024
Emko

Emko ESM-3712-H Instrukcja

27 Października 2024
Emko

Emko ATS-10 Instrukcja

27 Października 2024
Emko

Emko EAOM-11.2 Instrukcja

27 Października 2024
Emko

Emko EPM-3790 Instrukcja

27 Października 2024
Emko

Emko EPM-7790 Instrukcja

27 Października 2024
Livarno Lux

Livarno Lux IAN 108340 Instrukcja

27 Października 2024
Livarno Lux

Livarno Lux HG06009A-BS Instrukcja

27 Października 2024