Instrukcja obsługi HP Aruba Unified AP-345

HP Punkt dostępu Aruba Unified AP-345

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla HP Aruba Unified AP-345 (17 stron) w kategorii Punkt dostępu. Ta instrukcja była pomocna dla 4 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/17
Aruba 340 Series Campus Access Point
Installation Guide
Installation Guide | January 2018 1
Aruba 340 Series Campus Access Point 340 Series (AP-344 and AP-345) are high-performance dual-radio wireless devices.
These access points (AP) provide secure wireless connectivity for 2.4GHz 802.11 b/g/n and 5GHz 802.11a/n/ac Wi-Fi
networks. The optional dual-5GHz radio mode allows both radios to operate in the 5GHz radio mode simultaneously,
doubling the 5GHz capacity of the access point. The 340 Series can be deployed in either a controller-based (ArubaOS) or
controllerless (InstantOS) network environment. Two wired Ethernet ports located on the back of this access point are
available to connect the access point to the wired infrastructure and to deliver power the device.
This access point can be attached to a standard flat 9/16" or 15/16” suspended ceiling rail using the mount adapters
provided. Other mounting options are supported by additional mount kits (sold separately).
Aruba 340 Series Campus Access Point 340 Series provide the following capabilities:
Wireless access
Wireless mesh
Air Monitor (AM)*
Spectrum Monitor (SM)*
Support for selected USB peripherals
Integrated Bluetooth Low Energy (BLE) radio
* Air Monitor and Spectrum Monitor features are not supported while this device operates in dual-5GHz mode.
Package Contents
The following materials are included with this product:
Aruba 340 Series Campus Access Point
9/16" and 15/16” ceiling rail mount adapters
Hardware Overview
The following sections describe the hardware components of the 340 Series access point.
Figure 1 Aruba AP-345 (front view)
Inform your supplier if there are any incorrect, missing, or damaged parts. If possible, retain the carton, including the
original packing materials. Use these materials to repack and return the unit to the supplier if needed.
2Aruba 340 Series Campus Access Point | Installation Guide
LED
The LED displays located on the front panel of the access point indicate the following functions:
System Status
The System Status LED indicates the operating condition of the access point, See Table 1.
1 Blinking: one second on/one second off
2 Flashing: mostly on, shortly off every two seconds
Radio Status
The Radio Status LED indicates the operating mode of the access point’s radios. See Table 2.
3 Alternating: light cycles alternate between green/amber; one second on/one second off.
Table 1 System Status LED
Color/State Meaning
Off Device is powered off
Green - blinking 1Device is booting; not ready
Green - solid Device is ready; fully functional, no network restrictions
Green - flashing 2Device is ready; either uplink is operating at sub-optimal speed (<1Gbps)
Amber - solid Device is ready; operating in Power Save mode due to one of the following conditions:
powered by an 802.3af POE source
Intelligent Power Monitoring (IPM) restrictions applied
No network restrictions
Amber - flashing Device is ready; operating in Power Save mode due to one of the following conditions:
powered by an 802.3af POE source
Intelligent Power Monitoring (IPM) restrictions applied
Either uplink is negotiating at suboptimal speed (<1Gbps)
Red - solid Error condition - immediate action required
Table 2 Radio Status LED
Color/State Meaning
Off Meets one of the following conditions:
device is powered off
both radios are disabled
Green - solid Both radios operating in access mode
Green - blinking One radio operating in access mode; one radio disabled
Amber - solid Both radios operating in monitor mode
Amber - blinking One radio operating in monitor mode; one radio disabled
Alternating3One radio operating in access mode; one radio in monitor mode
Blue - Solid Both radios operating in dual 5GHz mode
Aruba 340 Series Campus Access Point | Installation Guide 3
LED Display Settings
The LEDs have three operating modes that can be selected in the system
management software:
Default mode: Refer to Table 1 and Table 2
Off mode: LEDs are off
Blink mode: LEDs blink green
To cycle through the modes, press the push button located on the back-right corner of the device using a small, narrow
object, such as a paperclip.
Antenna Connectors
The AP-344 access point supports up to 8 external antennas, which can be attached to the RP-SMA connectors located on
the front of the access point. See Figure 3.
The primary antenna ports, labeled A0-A3, correspond with the radio chains 0, 1, 2, and 3. This set of antennas can be
used in dual-radio mode (dual band, diplexed), for either upper or lower 5GHz channels in dual-5GHz mode.
The secondary antenna ports, labeled B0-B3, correspond with radio chains 0, 1, 2, and 3. This set if antennas can be used
for either upper or lower 5GHz channels in dual-5GHz mode, but are unable to operate in dual-radio mode. These
connectors are located beneath a removable plate on the front cover of the device.
Figure 2 Opening the antenna cover of the AP-344
To remove the cover, insert a flathead screwdriver into the slotted rubber bushing located on the top edge of the access
point, then use the screwdriver to pry off the cover. See Figure 2.
To determine which external antennas are compatible with this device, refer to the product data sheet at
www.arubanetworks.com.
!
!
!
!!
Holding the button for 10 seconds or longer will cause the device to return the access point to its original factory
settings.

Specyfikacje produktu

Marka: HP
Kategoria: Punkt dostępu
Model: Aruba Unified AP-345

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z HP Aruba Unified AP-345, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje Punkt dostępu HP

HP

HP Aruba AP-565 Instrukcja

11 Września 2024
HP

HP Aruba Unified AP-535 Instrukcja

28 Czerwca 2024
HP

HP Aruba Unified AP-515 Instrukcja

28 Czerwca 2024
HP

HP Aruba Unified AP-505 Instrukcja

28 Czerwca 2024
HP

HP Aruba Unified AP-345 Instrukcja

28 Czerwca 2024
HP

HP Aruba Instant On AP22 Instrukcja

28 Czerwca 2024
HP

HP Aruba AirMesh MST200 Instrukcja

28 Czerwca 2024
HP

HP M330 Instrukcja

28 Czerwca 2024
HP

HP 417 Instrukcja

28 Czerwca 2024
HP

HP E-MSM430 Instrukcja

28 Czerwca 2024

Instrukcje Punkt dostępu

Najnowsze instrukcje dla Punkt dostępu

Peplink

Peplink AP One AX Instrukcja

20 Marca 2025
Cisco

Cisco Aironet 3600i Instrukcja

15 Stycznia 2025
Luxul

Luxul P40 Instrukcja

14 Stycznia 2025
Luxul

Luxul XAP-1440 Instrukcja

14 Stycznia 2025
Ubiquiti Networks

Ubiquiti Networks UniFi AP Flex HD Instrukcja

12 Stycznia 2025
Mikrotik

Mikrotik LTAP Mini LTE kit Instrukcja

30 Grudnia 2025
TP-Link

TP-Link Omada EAP115-Wall Instrukcja

30 Grudnia 2025
D-Link

D-Link AirXpert DWL-7000AP Instrukcja

23 Grudnia 2024
EQ-3

EQ-3 HMIP-HAP Instrukcja

15 Grudnia 2024
Vimar

Vimar 20195.N Instrukcja

15 Grudnia 2024