Instrukcja obsługi HP Aruba AP-565

HP Punkt dostępu Aruba AP-565

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla HP Aruba AP-565 (12 stron) w kategorii Punkt dostępu. Ta instrukcja była pomocna dla 3 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/12
Aruba 560 Series Outdoor Access Points
Installation Guide
Rev 02 | July 2021 1
The Aruba 560 Series outdoor wireless access points (AP-565 and AP-567) are high-performance, multi-radio
wireless devices that can be deployed in either controller-based (ArubaOS) or controllerless (Aruba Instant)
network environment.
The Aruba 560 Series access points support IEEE 802.11ax standard, delivering high performance with the MIMO
(Multiple-Input, Multiple-Output) technology, while also supporting 802.11a/b/g/n/ac wireless services.
Package Contents
560 Series access point
Cable gland x 1
USB Type-C console cable x 1
Grounding lug and M4x6 screw x 1
Tools Required
Phillips screwdriver (#2 for M4x6 screw)
Flat blade screwdriver (Ethernet cable gland cover)
8mm allen or hex key (USB console cover)
The weatherproof caps for Ethernet and Console interfaces are connected to the access point, not loose in the
package.
Mounting kits for use with the 560 Series access points are sold separately. Contact your Aruba sales
representative for details.
Inform your supplier if there are any incorrect, missing, or damaged parts. If possible, retain the carton,
including the original packing materials. Use these materials to repack and return the unit to the supplier if
needed.
2Aruba 560 Series Outdoor Access Points | Installation Guide
Hardware Overview
Figure 1 560 Series Access Point
LED
The 560 Series access point is equipped with one LED that indicates the system status of the access point.
Table 1 560 Series LED Meanings during Boot Up
LED Color/State Meaning
System LED Off No power to AP
Red Initial power-up
Green - Flashing AP booting, not ready
Green - Steady AP ready and Gigabit Ethernet connected. The LED turns off
after 1200 seconds
Green - Yellow, 6 seconds
period
AP ready and 10/100Mbps Ethernet link established. The LED
turns off after 1200 seconds
USB Console Port, Reset
button and LED
Grounding PointEthernet PortAir Vent
Aruba 560 Series Outdoor Access Points | Installation Guide 3
Table 2 560 Series LED Meanings during Operation
Ethernet Port
The 560 Series access point is equipped with one Ethernet port (E0). The Ethernet port is 100/1000Base-T auto-
sensing MDI/MDX, which supports uplink connectivity when linked by an Ethernet cable.
Power
The Ethernet port supports PoE-in, allowing the AP to draw power from an 802.3af/802.3at PoE power
source.The 560 Series access point supports the Intelligent Power Monitoring (IPM) feature that actively
measures the power utilization of the AP and dynamically adapts to the power budget.
Table 3 lists operational restrictions when the AP is powered by different power options.
Table 3 Power Options and Operational Restriction
Grounding Point
Always remember to protect the access point by installing grounding lines. The ground connection must be
complete before connecting power to the access point enclosure.
USB Type-C Console Port
Use the included USB Type-C console cable to connect the access point to a laptop or a serial terminal for direct
management.
Reset Button
The reset button can be used to reset the access point to factory default settings or turn off/on the LED display.
There are two ways to reset the access point to factory default settings:
Reset the AP during normal operation
Press and hold down the reset button using a small, narrow object such as a paper clip for more than 10
seconds during normal operation.
LED Color/State Meaning
System LED Solid Red General fault - Immediate attention required
One blink off every 3
seconds
Radio 0 fault (5 GHz)
Two quick blink off 0.5
seconds apart cycled every
3 seconds
Radio 1 fault (2.4GHz)
Power Source IPM Restrictions
802.3at PoE n/a No restrictions, all capabilities available.
802.3af PoE enabled AP starts up in unrestricted mode, but may dynamically
apply restrictions depending on the PoE budget and actual
power.
802.3af PoE disabled 2.4GHz radio is restricted to 1 spatial stream.
You need a proper 8mm allen or hex key to open the cover of the USB Console port.

Specyfikacje produktu

Marka: HP
Kategoria: Punkt dostępu
Model: Aruba AP-565

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z HP Aruba AP-565, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje Punkt dostępu HP

HP

HP Aruba AP-565 Instrukcja

11 Września 2024

Instrukcje Punkt dostępu

Najnowsze instrukcje dla Punkt dostępu

Cisco

Cisco MR12 Instrukcja

14 Października 2024
Draytek

Draytek VigorAP 920R Instrukcja

13 Października 2024
Netgear

Netgear WNDAP360 Instrukcja

12 Października 2024
TP-Link

TP-Link Festa F65-Wall Instrukcja

9 Października 2024
D-Link

D-Link DWL-1000AP+ Instrukcja

9 Października 2024
D-Link

D-Link DWL-700AP Instrukcja

9 Października 2024
Cambium Networks

Cambium Networks cnPilot e505 Instrukcja

9 Października 2024
Cambium Networks

Cambium Networks cnPilot e425H Instrukcja

9 Października 2024
Cambium Networks

Cambium Networks cnPilot e600 Instrukcja

9 Października 2024
Cambium Networks

Cambium Networks cnPilot e510 Instrukcja

9 Października 2024