Instrukcja obsługi Dormakaba ED900

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Dormakaba ED900 (12 stron) w kategorii samozamykacz. Ta instrukcja była pomocna dla 9 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/12
ED900
Low Energy
Swing Door
Operators
2
dormakaba ED900 Swing Door Operators
2
dormakaba USA quality and
environmental management
systems in Reamstown, PA and
Steeleville, IL are certified to
ISO 9001:2015 and ISO 14001:2015.
ED900 Swing Door Operators
3 Technical Details & Specifications
3 Features
4 Ordering Guide
5 Technical Drawings
8 Accessories
3
dormakaba
3
ED900 Swing Door OperatorsTechnical Details & Specifications/Features
ED900 Swing Door Operators
dormakaba's most advanced
low-energy swing door power
operator.
The ED900 is fully ADA
compliant – helpful for
children, the elderly, persons
with disabilities, or those
carrying or pushing objects.
The operator is exceptionally
quiet, safe, and easy to use.
Doors open at precisely
controlled speeds and forces,
assuring safety for all users.
The ED900 features Contur
design for a highly aesthetic
look especially when used
with the TS93 family of
closers.
Technical Details
Onboard power supply for
access control devices:
1.5 A @ 24 VDC.
Maximum door size:
48" (1219 mm) wide.
Maximum door weight:
220 lb (100 kg).
Operator weight:
26.58 lb (12 kg).
Operating temperatures:
5° F to 122° F (1 C to 5 C).
Standard operator dimensions:
27" W × 2-3/4" H × 5-1/8" D
(685 mm × 70 mm × 130 mm).
Maximum opening angle:
Powered—110°,
Manual180°.
Non-handed.
On-board cycle counter.
27" cover standard.
One unit for push/pull track
and top jamb applications.
Axle extensions: 0, 5/16"
(9 mm), 3/4" (20 mm),
1-3/16" (30 mm), and 2-3/8"
(60 mm) — standard.
Certifications
ANSI/BHMA
156.19 Power
Assist and Low Energy
Power Operated Doors.
UL and CUL listed
for fire door
operators with
automatic closers.
ICC/ANSI A117.1
Accessible and
Usable buildings and
facilities.
Underwriters Laboratories:
ANSI/UL 325 Door, Drapery,
Gate, Louver, and Window
Operators and Systems.
California State Fire
Marshall (CSFM) approved.
Specifications
ED900 Series low energy
operators with selectable low
energy or power assist. Low
energy function to cycle the
door open as programmed.
Power assist function for
decreased opening force
when manually operated.
Operator to have a
programmable push and go.
All operators to have
programmable sweep speed,
latch speed, and backcheck
cushioning. Operators to
have the following
programmable options for
power open functions: delay
time, opening time/ opening
force, opening angle, and
door width selector.
Operators to have selectable
jumper to accommodate
push or pull side applications.
Operators to have on/off
strike delay when the ED900
must delay while a locking
device releases. Push side
(top jamb) and pull side
(track) arms to be available.
All operators will be hard
wired. All operators to have
selectable on/off obstacle
detection on closing.
Optional Specifications
All operators to have remote
switch wiring for tamper-
resistance. Hold open
function is deleted. On/off
status can be controlled from
a remote location. Specify
RS. All operators to be
powered with a power cord
plugged into a 120 VAC
receptacle. Specify PC.
Electrical Specifications
Power requirements:
115 VAC +/– 10%, 50/60 Hz,
6.6 A max.
Current: 6.6 A.
Fuse: 3 Amp – type AGC
size 1/4" – 1-1/4".
Branch circuit protection:
15 A min.
Auxiliary power output
24 VDC (normally) filtered,
unregulated 1.5 A max
range 24 VDC +/– 10%.
Form "C" relay contact for
controlling fail-secure or
fail-safe locking devices 50
VAC or DC at 1 A max.
When incorporating the
ED900 into a system with
other electrical components,
dormakaba's Technical
Services Department offers
assistance with point-to-
point wiring diagrams. Please
contact them with specific
requirements.
Programmable Features
Opening and closing speed.
Hold open time: from
0–30 seconds.
Backcheck & latching angles.
Blow open/night bank
hold open.
Wall blanking on pull side.
Safety sensor testing.
Delayed opening for
unlocking: From 0–4
seconds. Use with
electromechanical access
control peripherals such as
electric strikes or exit
devices with electric latch
retraction.
Closing force prior to
unlocking: Works with the
delayed unlocking feature
and accommodates
reduction of latch bolt
locking force prior to
releasing the electro-
mechanical access
control device.
Opening and closing force.
Latching action force:
Power boost during latching
cycle to overcome resistance
for door seals, locking
devices, or door/frame
misalignment.
Keep closed force: designed
to keep the door in the
closed position when unlocked.

Specyfikacje produktu

Marka: Dormakaba
Kategoria: samozamykacz
Model: ED900

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Dormakaba ED900, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje samozamykacz Dormakaba

Inne instrukcje Dormakaba