Instrukcja obsługi DJI Car Charger for Inspire 1

DJI zabawka sterowana radiowo Car Charger for Inspire 1

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla DJI Car Charger for Inspire 1 (3 stron) w kategorii zabawka sterowana radiowo. Ta instrukcja była pomocna dla 25 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF

Strona 1/3

2015.12

V1.0

Car Charger for Inspire 1

User Manual

Disclaimer

Thank you for purchasing the Car Charger for Inspire 1

(hereinafter referred to as “product”). Read this disclaimer

carefully before using this product. By using this product, you

hereby agree to this disclaimer and signify that you have read

it fully. Please use this product in strict accordance with the

manual and be sure to pay attention to the Warnings. SZ DJI

Technology Co., Ltd. and its afliated companies assume no

liability for damage(s) or injuries incurred directly or indirectly

from improper use of this product. Misuse includes, but is not

limited to, using unapproved chargers, charging unapproved

batteries, short-circuiting, overheating, introducing foreign

materials into the product, or touching the terminals with skin or

metal. Refer to the Safety Guidelines and Disclaimer, Intelligent

Flight Battery Safety Guidelines, and User Manual for applicable

information not herein contained.

This device complies with part 15 of the FCC Rules.

DJI is the registered trademark of SZ DJI Technology Co.,

Ltd. (abbreviated as “DJI”). Names of product, brand, etc.,

appearing in this manual are trademarks or registered

trademarks of their respective owner companies. This product

part of this product or manual shall be reproduced in any form

without the prior written consent or authorization of DJI.

This disclaimer is produced in various languages. In the event

of divergence among different versions, the Chinese version

shall prevail when the product in question is purchased in

Mainland China, and English version shall prevail when the

product in question is purchased in any other region.

Prole

The Car Charger for Inspire 1 is used to charge the Intelligent

Flight Battery or remote controller through a car’s cigarette

lighter port. It comes with low-voltage protection and overheating

protection which automatically cut off charging if your starting

battery voltage is too low or cigarette lighter port exceeds a

certain temperature.

Using the Car Charger

1. Connect one end of the car charger to your car’s cigarette

lighter and the other end to the Intelligent Flight Battery or

remote controller.

The content is subject to change.

Download the latest version from

http://www.dji.com/product/inspire-1

If you have any questions about this document, please

contact DJI by sending a message to

DocSupport@dji.com.

DO NOT cover the car charger. Ensure that there is

sufcient heat dissipation.

Always place the car charger on a stable surface.

Use the car charger when the engine is running to

attain optimal performance.

It will take a longer time to charge the Intelligent Flight

Battery and remote controller together.

If the car charger becomes loose and is reconnected

when charging, you may need to unplug and plug the

Intelligent Flight Battery to resume charging.

DO NOT touch the metal connector after it is unplugged.

2. The car charger’s LED indicator glows solid green when charging.

3. When the LED lights on the Intelligent Flight Battery and

remote controller turn off, charging is complete and you should

disconnect the car charger from the cigarette lighter port.

Printed in China .

Specications

Product Model C6S90

Operating

Temperature 32° to 104° F (0° to 40° C)

DC Input 12.3

16 V (Sedan)

30 V (Coach)

DC Output 26.1 V; 3.45 A; 90 W

Charge Time*

1 hr 40 min (TB47 Intelligent Flight Battery)

2 hours (TB48 Intelligent Flight Battery)

3 hr 20 min (remote controller)

* The charge time was tested in a lab environment at room temperature

and should be taken as reference only.

12 3.

16 V

or 25

30 V

Specyfikacje produktu

Marka:	DJI
Kategoria:	zabawka sterowana radiowo
Model:	Car Charger for Inspire 1
Kolor produktu:	Czarny
Typ produktu:	Przejściówka do ładowania
Ilość na paczkę:	1 szt.
Model:	Radio-Controlled (RC) Model Accessories & Supplies
Kompatybilność:	Inspire 1\nTB47, TB48
Zakres napięcia wejściowego:	12.3 - 30 V