Instrukcja obsługi Blade Nano S3
Blade
zabawka sterowana radiowo
Nano S3
Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Blade Nano S3 (19 stron) w kategorii zabawka sterowana radiowo. Ta instrukcja była pomocna dla 5 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek
Strona 1/19
RTF
Instruction Manual
Bedienungsanleitung
Manuel d’utilisation
Manuale di istruzioni
S3
2
EN
• Always keep a safe distance in all
directions around your model to avoid
collisions or injury. This model is controlled
by a radio signal subject to interference
from many sources outside your control.
Interference can cause momentary loss
of control.
• Always operate your model in open spaces
away from full-size vehicles, trafc and
people.
• Always carefully follow the directions and
warnings for this and any optional support
equipment (chargers, rechargeable battery
packs, etc.).
• Always keep all chemicals, small parts
and anything electrical out of the reach of
children.
• Always avoid water exposure to all
equipment not specically designed
and protected for this purpose. Moisture
causes damage to electronics.
• Never place any portion of the model in
your mouth as it could cause serious injury
or even death.
• Never operate your model with low
transmitter batteries.
• Always keep aircraft in sight and under
control.
• Always move the throttle fully down at
rotor strike.
• Always use fully charged batteries.
• Always keep transmitter powered on while
aircraft is powered.
• Always remove batteries before
disassembly.
• Always keep moving parts clean.
• Always keep parts dry.
• Always let parts cool after use before
touching.
• Always remove batteries after use.
• Never operate aircraft with damaged
wiring.
• Never touch moving parts.
Age Recommendation: Not for children under 14 years. This is not a toy.
WARNING: Read the ENTIRE instruction manual to become familiar with the
features of the product before operating. Failure to operate the product correctly
can result in damage to the product, personal property and cause serious injury.
This is a sophisticated hobby product. It must be operated with caution and common
sense and requires some basic mechanical ability. Failure to operate this Product in a
safe and responsible manner could result in injury or damage to the product or other
property. This product is not intended for use by children without direct adult supervision.
Do not use with incompatible components or alter this product in any way outside of the
instructions provided by Horizon Hobby, LLC. This manual contains instructions for safety,
operation and maintenance. It is essential to read and follow all the instructions and
warnings in the manual, prior to assembly, setup or use, in order to operate correctly and
avoid damage or serious injury.
The following terms are used throughout the product literature to indicate various levels of
potential harm when operating this product:
WARNING: Procedures, which if not properly followed, create the probability of property
damage, collateral damage, and serious injury OR create a high probability of supercial injury.
CAUTION: Procedures, which if not properly followed, create the probability of physical
property damage AND a possibility of serious injury.
NOTICE: Procedures, which if not properly followed, create a possibility of physical property
damage AND a little or no possibility of injury.
NOTICE
All instructions, warranties and other collateral documents are subject to change at the sole
discretion of Horizon Hobby, LLC. For up-to-date product literature, visit www.horizonhobby.
com or www.towerhobbies.com and click on the support or resources tab for this product.
Meaning of Special Language
Safety Precautions and Warnings
3EN
Length 200mm
Height 79mm
Flying Weight 32g
Main Rotor Diameter 197mm
Tail Rotor Diameter 40mm
Specifications
Components BNF BasicRTF
Airframe
Blade Nano S3
Included Included
Motors
Brushed
Installed Installed
Flybarless Unit
3-in-1 Control Unit with SAFE
®
technology
Installed Installed
Battery
150mAh 1S 3.7V 45C Li-Po
Battery
Included Required
Charger
1S USB Li-Po Charger, 300mA
Included Required
Transmitter
DSM2®/DSMX® Compatible
Transmitter
MLP6DSM
Included Required
Transmitter Batteries
4 AA
Included Required
Visit www.bladehelis.com
to register your helicopter
Table of Contents
Box Contents
• Blade Nano S3
• 150mAh 1S 3.7V 45C Li-Po Battery (EFLB1501S45, RTF Only)
• 1S USB Li-Po Charger, 300mA (EFLC1008, RTF Only)
• MLP6DSM Transmitter (SPMRMLP6, RTF Only)
• 4 AA Batteries (RTF Only)
USB Charging Warnings .............................. 4
Battery Charging 4 .........................................
Transmitter Setup Table (BNF) 5 .....................
Transmitter Control (RTF) 5 ............................
Installing the Flight Battery 6 .........................
Transmitter and Receiver Binding 7 ................
Control Tests ............................................... 7
Understanding the Primary Flight Controls 8 ..
Flight Modes 9 ...............................................
Panic Recovery 10 .........................................
First Flight Preparation 10 ..............................
Flying Checklist 10 ........................................
Flying the Nano S3 10 ....................................
Troubleshooting Guide 11 ..............................
Drift Calibration......................................... 12
Exploded View and Parts Listings 13 ..............
Optional Parts 14 ...........................................
Limited Warranty ...................................... 15
Warranty and Service Contact Information 16
FCC Information 17 ........................................
IC Information 17 ...........................................
Compliance Information for the European Union
... 18
Specyfikacje produktu
Marka: | Blade |
Kategoria: | zabawka sterowana radiowo |
Model: | Nano S3 |
Kolor produktu: | Blue, White |
Typ produktu: | Helikopter |
Materiał obudowy: | Plastik |
Podręcznik użytkownika: | Tak |
Pasmo częstotliwości: | 2.4 GHz |
Ilość: | 1 |
Odbiornik dołączony: | Tak |
Rodzaj baterii: | Wbudowana bateria |
Sugerowana płeć: | Chłopiec |
Rodzaj konstrukcji: | Sparuj z aparaturą i leć |
Długość produktu: | 79 mm |
Liczba wirników: | 2 wirn. |
Rodzaj silnika: | Silnik elektryczny |
System stabilizacji: | Brak systemu Flybar (FBL) głowica wirnika |
Średnica wirnika: | 196 mm |
Replica: | Nie |
Liczba ostrzy wirnika nośnego: | 2 |
Konfiguracja wirnika: | Skok ogólny |
Długość głównego ostrza: | 84 mm |
Tworzywo łopaty wirnika: | Plastik |
Potrzebujesz pomocy?
Jeśli potrzebujesz pomocy z Blade Nano S3, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą
Instrukcje zabawka sterowana radiowo Blade
16 Września 2024
14 Września 2024
14 Września 2024
14 Września 2024
14 Września 2024
14 Września 2024
14 Września 2024
14 Września 2024
14 Września 2024
14 Września 2024
Instrukcje zabawka sterowana radiowo
- zabawka sterowana radiowo Götze & Jensen
- zabawka sterowana radiowo Spektrum
- zabawka sterowana radiowo DJI
- zabawka sterowana radiowo Revell
- zabawka sterowana radiowo Traxxas
- zabawka sterowana radiowo Absima
- zabawka sterowana radiowo Carson
- zabawka sterowana radiowo SkyRC
- zabawka sterowana radiowo Amewi
- zabawka sterowana radiowo Sky Rider
- zabawka sterowana radiowo Futaba
- zabawka sterowana radiowo ACME
- zabawka sterowana radiowo Graupner
- zabawka sterowana radiowo E-flite
Najnowsze instrukcje dla zabawka sterowana radiowo
21 Września 2024
16 Września 2024
16 Września 2024
14 Września 2024
13 Września 2024
13 Września 2024
13 Września 2024
13 Września 2024
13 Września 2024
13 Września 2024