Instrukcja obsługi Blade Fusion 360 Smart

Blade zabawka sterowana radiowo Fusion 360 Smart

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Blade Fusion 360 Smart (21 stron) w kategorii zabawka sterowana radiowo. Ta instrukcja była pomocna dla 4 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/21
Instruction Manual
Bedienungsanleitung
Manuel d’utilisation
Manuale di Istruzioni
2
EN
WARNING AGAINST COUNTERFEIT PRODUCTS: If you ever need to replace a Spektrum
component found in a
Horizon Hobby product, always purchase from Horizon Hobby, LLC or a Horizon Hobby authorized dealer to
ensure authentic high-quality Spektrum product. Horizon Hobby, LLC disclaims all support and warranty with regards,
but not limited to, compatibility and performance of counterfeit products or products claiming compatibility with DSM
®
or Spektrum technology.
As the user of this product, you are solely responsible for operating in a manner that does not endanger yourself and
others or result in damage to the product or the property of others.
• Always keep a safe distance in all directions around
your model to avoid collisions or injury. This model is
controlled by a radio signal subject to interference from
many sources outside your control. Interference can
cause momentary loss of control.
• Always operate your model in open spaces away from
full-size vehicles, traffic and people.
• Always carefully follow the directions and warnings
for this and any optional support equipment (chargers,
rechargeable battery packs, etc.).
• Always keep all chemicals, small parts and anything
electrical out of the reach of children.
• Always avoid water exposure to all equipment not
specifically designed and protected for this purpose.
Moisture causes damage to electronics.
• Never place any portion of the model in your mouth as it
could cause serious injury or even death.
• Never operate your model with low transmitter batteries.
• Always keep aircraft in sight and under control.
• Always move the throttle fully down at rotor strike.
• Always use fully charged batteries.
• Always keep transmitter powered on while aircraft is
powered.
• Always remove batteries before disassembly.
• Always keep moving parts clean.
• Always keep parts dry.
• Always let parts cool after use before touching.
• Always remove batteries after use.
• Never operate aircraft with damaged wiring.
• Never touch moving parts.
Age Recommendation: Not for children under 14 years. This is not a toy.
WARNING: Read the ENTIRE instruction manual to become familiar with the features of the product before
operating. Failure to operate the product correctly can result in damage to the product, personal property and
cause serious injury.
This is a sophisticated hobby product. It must be operated with caution and common sense and requires some basic
mechanical ability. Failure to operate this Product in a safe and responsible manner could result in injury or damage
to the product or other property. This product is not intended for use by children without direct adult supervision. Do
not use with incompatible components or alter this product in any way outside of the instructions provided by Horizon
Hobby, LLC. This manual contains instructions for safety, operation and maintenance. It is essential to read and follow
all the instructions and warnings in the manual, prior to assembly, setup or use, in order to operate correctly and avoid
damage or serious injury.
The following terms are used throughout the product literature to indicate various levels of potential harm when
operating this product:
WARNING: Procedures, which if not properly followed, create the probability of property damage, collateral damage,
and serious injury OR create a high probability of superficial injury.
CAUTION: Procedures, which if not properly followed, create the probability of physical property damage AND a
possibility of serious injury.
NOTICE: Procedures, which if not properly followed, create a possibility of physical property damage AND a little or no
possibility of injury.
NOTICE
All instructions, warranties and other collateral documents are subject to change at the sole discretion of Horizon
Hobby, LLC. For up-to-date product literature, visit horizonhobby.com or towerhobbies.com and click on the support or
resources tab for this product.
Meaning of Special Language
Safety Precautions and Warnings
3EN
Components BNF Basic
Airframe Blade® Fusion 360 SMART Included
Motors InstalledBrushless Motor (BLH5051)
Receiver Flight Controller/Receiver (SPMFC6250HX, SPM4651T) Installed
ESC InstalledAvian 45Amp Brushless SMART ESC 6S (SPMXAE1045)
Swash Servos InstalledSub-Micro Digital Heli Cyclic MG Servo (SPMSH3055)
Tail Servo Sub-Micro Digital Heli Tail MG Servo (SPMSH3065) Installed
Battery Spektrum
2200mAh 3S 11.1V SMART 50C; IC3 (SPMX22003S50) Required
Charger RequiredLi-Po Balancing Charger
Transmitter Full Range DSM2
®/DSMX® technology transmitter Required
Table of Contents
Box Contents 3 ....................................................................
First Flight Preparation 4 ......................................................
Flying Checklist 4 ................................................................
LED Indicator on Flight Controller 4 ......................................
SMART Throttle .................................................................4
Low Voltage Cutoff (LVC) 4 ...................................................
Electronic Speed Controller Governor Operation 5 ...............
Transmitter Setup 5 .............................................................
Installing the Flight Battery 7 ...............................................
Transmitter and Receiver Binding 7 ......................................
Throttle Hold 8 .....................................................................
Control Tests ..................................................................... 8
Panic Recovery 9 .................................................................
Pre-Flight Checklist 9 ..........................................................
Flying the Blade Fusion 360 SMART 10 ................................
Gyro Gain Adjustment .....................................................10
Tail Belt Tension .............................................................10
Post-Flight Inspections and Maintenance 11 ........................
Advanced Tuning (Forward Programming) 11 .......................
Advanced Tuning (Non-Forward Programming)................12
Flight Mode and Rate Selection 13 .......................................
Troubleshooting Guide 14 ....................................................
Exploded View ................................................................15
Parts List 17 ........................................................................
Recommended Parts List 17 ................................................
Optional Parts List 17 ...........................................................
Limited Warranty ............................................................18
Warranty and Service Contact Information 19 ......................
FCC Information 19 ..............................................................
IC Information 19 .................................................................
Compliance Information for the European Union 20 ..............
Blade® Fusion 360 SMART helicopter
Length 26.9 in (685mm)
Height 26.9 in (190mm)
Flying Weight 32.2 oz (915 g)
Main Rotor Diameter 31.3 in (796mm)
Tail Rotor Diameter 6.9 in (175mm)
Box Contents
Specifications
If you own this product, you may be
required to register with the FAA.
For up-to-date information on how
to register with the FAA, please visit
https://registermyuas.faa.gov/.
For additional assistance on regulations
and guidance on UAS usage, visit
knowbeforeyoufly.org/


Specyfikacje produktu

Marka: Blade
Kategoria: zabawka sterowana radiowo
Model: Fusion 360 Smart
Kolor produktu: Blue, Red, White
Typ produktu: Helikopter
Materiał obudowy: Włókno szklane
Wysokość produktu: 190 mm
Szerokość produktu: 90 mm
Podręcznik użytkownika: Tak
Pasmo częstotliwości: 2.4 GHz
Ilość: 1
Silnik: Bezszczotkowy
Liczba kanałów: 6 kan.
Baterie w zestawie: Nie
Sugerowana płeć: Chłopiec
Rodzaj konstrukcji: Sparuj z aparaturą i leć
Długość produktu: 685 mm
Liczba wirników: 2 wirn.
Czas lotu: 4 min
Rodzaj silnika: Silnik elektryczny
System stabilizacji: Brak systemu Flybar (FBL) głowica wirnika
Elektroniczny kontroler prędkości silnika (ESC): Tak
Liczba serw: 3
Replica: Nie
Liczba ostrzy wirnika nośnego: 2
Konfiguracja wirnika: Skok ogólny
Wbudowany servo: Tak
Długość głównego ostrza: 350 mm
Średnica wirnika ogonowego: 173 mm
Tworzywo łopaty wirnika: Włókno węglowe

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Blade Fusion 360 Smart, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje zabawka sterowana radiowo Blade

Blade

Blade Fusion 550 Instrukcja

14 Września 2024
Blade

Blade 150 FX RTF Instrukcja

14 Września 2024
Blade

Blade 150 S Instrukcja

14 Września 2024
Blade

Blade Nano S3 Instrukcja

14 Września 2024
Blade

Blade 330 S Instrukcja

14 Września 2024
Blade

Blade mCPX BL2 Instrukcja

14 Września 2024
Blade

Blade Fusion 480 Instrukcja

14 Września 2024
Blade

Blade Fusion 180 Instrukcja

14 Września 2024

Instrukcje zabawka sterowana radiowo

Najnowsze instrukcje dla zabawka sterowana radiowo