Instrukcja obsługi Da-Lite Parallax 28805V

Da-Lite Ekran projekcyjny Parallax 28805V

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Da-Lite Parallax 28805V (8 stron) w kategorii Ekran projekcyjny. Ta instrukcja była pomocna dla 12 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF

Strona 1/8

INSTRUCTION BOOK FOR

Parallax™ Screen

Tools Required for Installation

Included Hardware

Phillips Screwdriver Tape MeasurePencil

Large Wall Bracket (47" Long)

Installation screws not included

Quantities vary by screen size:

Screens 80" and smaller viewing width = 1

Screens over 80" to 96" viewing width = 2

Screens over 96" viewing width = 3

Small Wall Bracket (8" Long)

Installation screws not included

Quantity = 1. Only for screens 80" and smaller viewing width.

#8 Stud with Shoulder (8 each) Black Flat Head Screw (12) Elastic Ring

(1 Pack - Usage Varies by Screen Size)

Foam Sheet (1)

Gloves (2 pair)

Disclaimer

Milestone and its ailiated corporations and subsidiaries

(collectively "Milestone"), intend to make this manual accurate

and complete. However, Milestone makes no claim that the

information contained herein covers all details, conditions or

variations, nor does it provide for every possible contingency in

connection with the installation or use of this subject to change

without notice or obligation of any kind. Milestone makes no

representation of warranty, expressed or implied, regarding the

information contained herein. Milestone assumes no

responsibility for accuracy, completeness or suiciency of the

information contained in this document.

Da-Lite® is a registered trademark of Milestone AV Technologies.

Material Handling Guidelines

CAUTION: Handle screen surface with care. Ambient light rejecting screen surfaces are delicate and should remain lat at all

times.

• Carefully and evenly unroll screen surface to ensure latness.

• Do not fold, stretch or crease screen surface.

• Do not allow objects to rest on screen surface.

• Do not puncture screen surface.

1. Unwrap the frame pieces. Assemble frame pieces on provided

foam sheet. This will help keep the frame clean and protect it

from scratches.

NOTE: The frame pieces are labeled “top” and “bottom”. Be

sure the frame pieces are assembled according to the labels.

This will ensure the attachment pattern on the frame and

screen surface will match.

Figure 1 (Rear View)

Frame Assembly

Cleaning

Parallax screen surface can be cleaned as follows:

Using a white clean cloth (100% cotton preferred) that is dampened with clean water, gently wipe the area in a horizontal direction. Do

not wipe in a vertical direction or with a circular motion. Using a dry 100% cotton cloth, wipe screen surface dry in horizontal direction

after each cleaning. Windex Original spray cleaner can be used on tough to clean areas.

2. Slide the frame pieces together at corners.

NOTE: The frame assembly holes may not appear to it

properly at the corners until all fasteners have been attached.

Once fasteners are attached, the frame corners will be drawn

in for a proper it.

3. Secure frame pieces with black lat head screws provided. Do

not tighten screws until all are started. See Figure 1.

4. Attach the eight #8 studs to the back of the frame in the

predrilled holes.

Black Flat Head Screws

#8 Studs

Specyfikacje produktu

Marka:	Da-Lite
Kategoria:	Ekran projekcyjny
Model:	Parallax 28805V
Kolor produktu:	Black,Metallic,White
Typ produktu:	Filtr do aparatu
Ilość:	1
Kompatybilność:	EVO Lite+
Kompatybilność marki:	Autel
Rodzaj filtra soczewki aparatu:	ND16,ND32,ND4,ND8