Instrukcja obsługi Da-Lite Deluxe Model B 71350

Da-Lite Ekran projekcyjny Deluxe Model B 71350

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Da-Lite Deluxe Model B 71350 (4 stron) w kategorii Ekran projekcyjny. Ta instrukcja była pomocna dla 6 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/4
INSTRUCTION BOOK FOR
Deluxe Model B®
2
Installation Setting Up Your Screen
These illustrations (all rear views for simpliication) show how
easy the Deluxe Model B Screen is to operate.
1. Remove plastic protective wrap from handle and tension arm.
2. To start unrolling the picture surface,
pull down on cord pull knob. Then
with hand resting on the handle, pull
screen down.
3. The automatic tension arm moves into
position in a precision-like manner.
4. When surface is down, a simple press
of contour-shaped handle locks it into
position ready for the show!
5. To re-roll picture surfacepress irmly
downward and counter-clockwise on lat
handle to release lock. Permit surface to
re-roll rapidly into case. Control upward
movement by lightly holding handle or
cord pull knob.
PROTECT YOUR SCREEN by keeping it rolled in its case when
not in use. Always examine both front and back of surface before
re-rolling into case to make certain screen is free of dust, dirt or
other foreign matter. Use a very soft duster to gently remove
any foreign particles.
The Deluxe Model B must be suspended from the ceiling or used
with extension type wall brackets to allow room for the
Automatic Tensionizer.
For Wall Mounting
Special extension wall brackets such
as Da-Lite’s No. 6, No. 11 or No. 23
brackets must be used if screen is
to be wall mounted. Check with your
dealer to determine which best its
your needs.
Brackets should be fastened
securely to a solid surface such as a
wooden reinforcement board and
not in the plaster only. Rarely will
wall studs be found to support both
ends of a screen. Various types of
fasteners are available from local
hardware stores.
For Ceiling Suspension
If the screen is to be ceiling
mounted, two screw hooks should
be placed in a beam or other solid
surface. For drop ceilings, Da-Lite’s
TBar Clips may be purchased.
3
Screen Adjustment Screen Accessories
Wall Brackets
Da-Lite No. 6 and No. 11 Non-adjustable wall brackets and
No. 23 adjustable extension wall brackets are ideal for keystone
elimination, chalkboard clearance, or corner mounting.
The screen brackets should be fastened to the
studding or other solid surface and not
in the plaster only. Suspend screen
from D” rings.
No. 23 Adjustable
Wall Brackets
Screen can be extended
10"-24" from wall by wing
nut and bolt adjustment.
No. 11 Wall Brackets
Screen can be extended
10" or 14" from wall by
changing position of
bracket.
No. 6 Wall Brackets
Screen can be extended
6" from wall.
T-Bar Clip
For Drop Ceilings
50 lb. max. load
capacity.
Tilt Lock
For Keystone Elimination
Holds back bottom of
screen in tilted position
to eliminate keystoning.
NOTE: Tensioning of the Deluxe Model B picture
surface was made at the factory. Should more
tension be required, the screw in the channel
holding the upper tension arm assembly should be
moved upward in holes allotted for this purpose. For
any adjustment, it is recommended that the screen
be removed, placed on a lat surface and a pair of
pliers and a Phillips screwdriver be used in removing
the screw and nut.
Protect Your Screen
Before re-rolling surface into case, examine both
front and back of surface to be sure they are free
of foreign matter.
Upper Tension Arm Assembly
Nut Screw
Channel
Back View Of Screen
Case
Upper
Tension
Arm
Assembly


Specyfikacje produktu

Marka: Da-Lite
Kategoria: Ekran projekcyjny
Model: Deluxe Model B 71350

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Da-Lite Deluxe Model B 71350, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje Ekran projekcyjny Da-Lite

Instrukcje Ekran projekcyjny

Najnowsze instrukcje dla Ekran projekcyjny