Instrukcja obsługi Blustream AMF42AU

Blustream router AMF42AU

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Blustream AMF42AU (4 stron) w kategorii router. Ta instrukcja była pomocna dla 6 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF

Strona 1/4

AMF42AU QUICK REFERENCE GUIDE

Contact: support@blustream.com.au | | support@blustream-us.com support@blustream.co.uk

AMF42AU

Quick Reference Guide

Our AMF42AU is an advanced 4K 4x2 multi-format presentation switcher featuring

3 x HDMI and 1 x USB-C input to 2 x HDMI / 1 x HDBaseT™ output. The AMF42AU

provides enhanced features including seamless switching, independent video

scaling on outputs, MIC input with phantom power, audio mixing and PoC to

power a Blustream compatible HDBaseT™ receiver. The AMF42AU also features

a Web GUI for control and configuration, source and display control via: RS-232,

CEC, manual or automated source selection, IR pass-through and control via front

panel, IR, RS-232 and TCP/IP. The AMF42AU is an ideal product for your boardroom,

classroom or lecture theatre.

Introduction

FEATURES:

• Features 3 x HDMI and 1x USB-C inputs which can be independently routed to 2 x HDMI / HDBaseT™ outputs

• Seamless source switching with manual or auto source selection

• Independent video scaling on dual outputs

• Supports HDMI 2.0 18Gbps specification

• Supports resolutions up to 4K UHD 60Hz 4:4:4

• Dual HDMI / HDBaseT™ on output 2. HDBaseT™ output supports distribution of video sources up to 70m 1080p (4K

60Hz 4:4:4 up to 40m) to the Blustream RX70CS receiver

• Supports USB Type C up to 4K UHD 60Hz 4:4:4, DP1.2 with 40W charging capability

• Audio breakout to analogue L/R audio and Toslink (S/PDIF) digital outputs concurrently

• Audio mixing capabilities with independent level adjustment

• Analogue audio inputs support both balanced and unbalanced audio

• MIC input supports line level or 48V phantom power

• Configurable source and display control via RS-232, IR and CEC

• Web interface module for control and configuration of matrix

• Control via TCP/IP, RS-232, IR and front panel

• Open control API (IP / RS-232) for integration with 3rd party control platforms

• HDCP 2.2 compliant with advanced EDID management

AMF42AU QUICK REFERENCE GUIDE

www.blustream.com.au | www.blustream-us.com www.blustream.co.uk|02

Front Panel Description

1 Input Selection Buttons - Press to select the input signal between HDMI 1 to 3 and USB-C

2 Output Selection Buttons - Press to select the output port between outputs 1 and 2

3 Menu Up / Down / Le / Right Buttons - Press to navigate through the on-screen menu system

4 Menu and Select Buttons - Press the menu button to bring up the on-screen menu, and the select button to select

items within the on-screen menu system

5 Power Button - Press and hold to power the switcher on or o

6 Audio Embed / Mic / Audio Out LED Indicator - Indicates the currently selected audio source for volume adjustment

7 Enter / Mute Rotary Dial Button - Press to adjust the currently selected audio source, rotate to adjust the volume

level up or down

8 LED Level Indicator - Indicates the volume level of the currently selected audio source

1 HDMI Audio Embed Input - Supports balanced or unbalanced analogue audio to be embedded over HDMI input 1

2 HDMI Inputs 1-3 - Connect to HDMI source equipment

3 USB-C Input - Connect to USB-C source equipment - please ensure that a USB-C cable is used that is capable of

carrying video

4 HDMI Outputs 1-2 - Connect to HDMI display equipment

5 HDBaseT™ Output - Output for remote display. Connect to compatible Blustream HDBaseT™ receiver

6 Optical Audio Output - Toslink connector to connect to external audio distribution equipment or amplifier

7 Analogue Audio Output - Supports balanced or unbalanced analogue audio output to connect to external audio

distribution equipment or amplifier

8 Audio Embed Input - Supports balanced or unbalanced audio to be embedded over the input signal

9 Mic Audio Input - Supports balanced and unbalanced microphones

q Phantom Power On / O Switch - Enables or disables 48V phantom power for the microphone input

w IR Input - 3.5mm stereo jack. Sends 5V IR to a compatible Blustream HDBaseT™ receiver

e IR Output - 3.5mm mono jack. Receives 5V IR from a compatible Blustream HDBaseT™ receiver

r IR Control Input - 3.5mm stereo jack. 5V input to connect an IR receiver or control processor to control AMF42AU

t USB Upgrade Port - Used for firmware udpate

y RS-232 Port - 3-pin Phoenix connector for control of the Matrix from PC or 3rd party control processor

u TCP/IP Port - RJ45 connector to connect to LAN for TCP/IP control of matrix and to access web GUI

i Power Port – Use included 24V/5A DC adaptor

1 4 5

Rear Panel Description

2 4 9

7 82

1 5 6 7 8 10 11 12 13 1514 16 173

AMF42AU QUICK REFERENCE GUIDE

Contact: support@blustream.com.au | | support@blustream-us.com support@blustream.co.uk 03

EDID Control

EDID (Extended Display Identification Data) is a data structure that is used by a source device to find out what audio

and video resolutions are supported by the display. By specifying the video resolution and audio format of the source

device you can improve the EDID hand shaking thus making HDMI more reliable.

Configuration of the EDID settings for each input can be achieved using the following RS-232 commands:

EDIDxxDFzz

Where xx = Input: 00 refers to ALL inputs; 01-04 = specific input

zz = EDID as shown below

zz = 00: HDMI 1080p@60Hz, Audio 2ch PCM (Default)

zz = 01: HDMI 4K@30Hz 4:4:4, Audio 2ch PCM

zz = 02: HDMI 4K@60Hz 4:2:0, Audio 2ch PCM

zz = 03: HDMI 4K@60Hz 4:4:4, Audio 2ch PCM

zz = 04: DVI 1280x1024@60Hz, Audio None

zz = 05: DVI 1920x1080@60Hz, Audio None

zz = 06: DVI 1920x1200@60Hz, Audio None

zz = 07: HDMI 1920x1200@60Hz, Audio 2ch PCM

zz = 08: User EDID 1

zz = 09: User EDID 2

zz = 10: EDID Passthrough1 (Copy from HDBT)

zz = 11: EDID Passthrough2 (Copy from HDMI OUT1)

zz = 12: EDID Passthrough3 (Copy from HDMI OUT2)

RS-232 Configuration

The RS-232 port is used for configuration and control of the product, as well as pass through of RS-232 commands to

the Blustream RX70CS receiver.

The default RS-232 communication settings are:

Baud Rate: 57600

Data Bit:

1 Stop Bit:

Parity Bit: none

For a complete RS-232 command list please see the User Manual - available to download from the Blustream website.

Web GUI Control

The Matrix features an in-built Web GUI which can be used for control and configuration of the product.

Default Default Default Username is: blustream Password is: 1234 IP Address is: 192.168.0.200

For further information please see the User Manual - available to download from the Blustream website.

Specyfikacje produktu

Marka:	Blustream
Kategoria:	router
Model:	AMF42AU
Kolor produktu:	Czarny
Napięcie wejściowe AC:	24 V
Wysokość produktu:	44 mm
Szerokość produktu:	437 mm
Głębokość produktu:	265 mm
Zakres temperatur (eksploatacja):	-5 - 55 °C
Wejscie Audio (L,P):	2
Zakres temperatur (przechowywanie):	-25 - 70 °C
Ilość portów HDMI:	5
Port RS-232:	1
Maks. rozdzielczość:	3840 x 2160 px
Ilość DisplayPort:	1
Maksymalna częstotliwość odświeżania:	60 Hz
HDCP:	Tak
Możliwości montowania w stelażu:	Tak
Obsługiwane rozdzielczości grafiki:	3840 x 2160
HDMI in:	3
Wyjście audio (prawe/lewe):	1
Wersja HDCP:	2.2
Pojemność stelaża:	1U
Rodzaj portu wideo:	HDMI
Typ portu USB:	USB Typu-A
Prąd wejściowy zasilacza:	5 A