Instrukcja obsługi American DJ VF1600

American DJ Maszyna efektów VF1600

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla American DJ VF1600 (6 stron) w kategorii Maszyna efektów. Ta instrukcja była pomocna dla 4 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF

Strona 1/6

User Instructions

9/14

Caution: Fog Machines may set o Smoke Alarms!

VF1600

specications, diagrams, images, and instructions herein are

subject to change without notice. ADJ Products, LLC logo and

identifying product names and numbers herein are trademarks

of ADJ Products, LLC. Copyright protection claimed includes all

forms and matters of copyrightable materials and information

now allowed by statutory or judicial law or hereinafter granted.

Product names used in this document may be trademarks or

registered trademarks of their respective companies and are

hereby acknowledged. All non-ADJ Products, LLC brands and

product names are trademarks or registered trademarks of their

respective companies.

ADJ Products, LLC and all aliated companies hereby dis-

claim any and all liabilities for property, equipment, building,

and electrical damages, injuries to any persons, and direct or

indirect economic loss associated with the use or reliance of

any information contained within this document, and/or as a

result of the improper, unsafe, unsucient and negligent as-

sembly, installation, rigging, and operation of this product.

Europe Energy Saving Notice

Energy Saving Matters (EuP 2009/125/EC)

Saving electric energy is a key to help protecting the enviroment.

Please turn o all electrical products when they are not in use. To

avoid power consumption in idle mode, disconnect all electrical

equipment from power when not in use. Thank you!

• Be sure to save the packing carton in the unlikely event the unit

may have to be returned for service

• Do not spill water or other liquids into or on to your fogger. Be

sure that all the fog uid is kept inside the uid reservoir

• Be sure that the local power outlet match that or the required

voltage for your fog machine

• Do not remove the top cover under any conditions. There are no

user serviceable parts inside

• Disconnect the unit’s main power when left unused for long peri-

ods of time

• Never connect this unit to a dimmer pack

• Do not attempt to operate this unit, if it becomes damaged in anyway

• Never operate this unit when it’s cover is removed

• To reduce the risk of electrical shock or re, do not expose this

unit rain or moisture

• Do not attempt to operate this unit if the power cord has been fray-

ed or broken. Do not attempt to remove or break o the ground

prong from the electrical cord. This prong is used to reduce the

risk of electrical shock and re in case of an internal short

• Disconnect from main power before making any type of connection

• Never block the ventilation holes. Always be sure to mount this

unit in an area that will allow proper ventilation. Allow about 6”

(15cm) between this device and a wall

• This unit is intended for indoor use only, use of this product out-

doors voids all warranties

• When storing for long periods of time, please follow the instruc-

tions on page 6 for proper maintenance and storage.

• Always mount this unit in a safe and stable matter

• Please route your power cord out of the way of foot trac. Power

cords should be routed so they are not likely to be walked on,

pinched by items placed upon or against them

• The unit should only be serviced by qualified service personnel

when:

A. The power-supply cord or the plug has been damaged.

B. Objects have fallen, or liquid has been spilled into the unit.

C. The unit has been exposed to rain or water.

D. The appliance does not appear to operate normally or

exhibits a marked change in performance.

VF1600 Safety Precautions

ADJ Products, LLC - www.adj.com - VF1600 Instruction Manual Page 3

Introduction: Congratulations, you have just purchased one of the

most reliable fog machines on the market today! The VF1600 commer-

cial fog machine have been designed to perform reliably for years when

the guidelines in this booklet are followed. Please read and understand

the instructions in this manual carefully and thoroughly before attempt-

ing to operate this unit. These instructions contain important informa-

tion regarding safety during use and maintenance.

Customer Support: ADJ Products, LLC provides a toll free cus-

tomer support line, to provide set up help and to answer any question

should you encounter problems during your set up or initial operation.

You may also visit us on the web at www.adj.com for any comments

or suggestions. For service related issue please contact ADJ Products,

LLC. Service Hours are Monday through Friday 8:00 a.m. to 4:30 p.m.

Pacic Standard Time.

Voice: (800) 322-6337

Fax: (323) 582-2941

E-mail: support@americandj.com

To purchase parts online visit http://parts.americandj.com

Warning! To prevent or reduce the risk of electrical shock or re, do

not expose this unit to rain or moisture.

Caution! There are no user serviceable parts inside this unit. Do not

attempt any repairs yourself, doing so will void your manufactures war-

ranty. In the unlikely event your unit may require service please contact

ADJ Products, LLC.

Do not discard the shipping cartoon in the trash. Please recycle when

ever possible.

SAFETY ISSUES:

NEVER POINT OR AIM A FOG MACHINE TOWARDS PEOPLE OR

THEIR CLOTHING. THIS UNIT EMITS HOT VAPOR AND SHOULD

BE USED WITH THE SAME CARE THAT YOU WOULD OBSERVE

WHEN USING AN ELECTRIC KETTLE OR IRON.

VF1600 Introduction

Please Note: Specications and improvements in the design of

this unit and this manual are subject to change without any prior

written notice.

ADJ Products, LLC - www.adj.com - VF1600 Instruction Manual Page 2

ADJ Products, LLC - www.adj.com - VF1600 Instruction Manual Page 4 ADJ Products, LLC - www.adj.com - VF1600 Instruction Manual Page 5

Power Supply: Before plugging your unit in, be sure the source volt-

age in your area matches the required voltage for your ADJ VF1600.

The VF1600 is available in a 120v and 220v version. Because line volt-

age may vary from venue to venue, you should be sure your unit volt-

ages matches the wall outlet voltage before attempting to operate you

xture.

DMX-512: -DMX is short for Digital Multiplex. This is a universal pro

tocol used by most lighting and controller manufactures as a form of

communication between intelligent fixtures and controllers. A DMX

controller sends DMX data instructions from the controller to the fix-

ture. DMX data is sent as serial data that travels from fixture to fixture

via the DATA “IN” and DATA “OUT” XLR terminals located on all DMX

fixtures (most controllers only have a DATA “OUT” terminal).

DMX Linking: DMX is a language allowing all makes and models

of dierent manufactures to be linked together and operate from a

single controller, as long as all xtures and the controller are DMX

compliant. To ensure proper DMX data transmission, when using

several DMX fixtures try to use the shortest cable path possible. The

order in which fixtures are connected in a DMX line does not influence

the DMX addressing. For example; a fixture assigned a DMX address

of 1 may be placed anywhere in a DMX line, at the beginning, at the

end, or anywhere in the middle. Therefore, the first fixture controlled

by the controller could be the last fixture in the chain. When a fixture

is assigned a DMX address of 1, the DMX controller knows to send

DATA assigned to address 1 to that unit, no matter where it is located

in the DMX chain.

Data Cable (DMX Cable) Requirements (For DMX and Master/Slave

Operation): The VF1600 can be controlled via

DMX-512 protocol. The VF1600 1 channel DMX

unit. The DMX address is set using the dipswitches

on the rear panel of the unit. Your unit and your

DMX controller require a approved DMX-512 110

Ohm Data cable for data input and data output

(Figure 1). We recommend Accu-Cable DMX

cables. If you are making your own cables, be sure

to use standard 110-120 Ohm shielded cable (This

VF1600 DMX Set Up VF1600 DMX Set Up

DMX512 IN

3-PIN XLR

DMX +

DMX -

COMMON

DMX512 OUT

3-PIN XLR

Figure 2

Figure 3

1 Ground 1 Ground

XLR Male Socket XLR Pin Conguration

3 Hot

2 Cold 2 Cold

3 Hot

XLR Female Socket

Pin 3 = Data True (positive)

Pin 2 = Data Compliment (negative)

Pin 1 = Ground

Notice: Be sure to follow gures two and three when making your own

cables. Do not use the ground lug on the XLR connector. Do not con-

nect the cable’s shield conductor to the ground lug or allow the shield

conductor to come in contact with the XLR’s outer casing. Grounding

the shield could cause a short circuit and erratic behavior.

Special Note: Line Termination.

When longer runs of cable are

used, you may need to use a terminator on the last unit to avoid erratic

behavior. A terminator is a 110-120 ohm 1/4 watt resistor which is con-

nected between pins 2 and 3 of a male XLR connector (DATA + and

DATA -). This unit is inserted in the female XLR connector of the last

unit in your daisy chain to terminate the line. Using a cable terminator

(ADJ part number Z-DMX/T) will decrease the possibilities of erratic

behavior.

Termination educes signalr errors and

avoids signal transmission problems

and interference. It is always advisable

to connect a DMX terminal, (Resistance

120 Ohm 1/4 W) between PIN 2 (DMX-)

and PIN 3 (DMX +) of the last fixture. Figure 4

Figure 1

cable may be purchased at almost all professional sound and lighting

stores). Your cables should be made with a male and female XLR con-

nector on either end of the cable. Also remember that DMX cable must

be daisy chained and cannot be split.

Specyfikacje produktu

Marka:	American DJ
Kategoria:	Maszyna efektów
Model:	VF1600

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z American DJ VF1600, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą

Twoje imię*

Twój email*

Napisz tutaj swoje pytanie

Instrukcje Maszyna efektów American DJ

American DJ Boom Box FX2 Instrukcja

6 Września 2024

American DJ H2O DMX IR Instrukcja

5 Września 2024

American DJ VF1600 Instrukcja

5 Września 2024

American DJ VF1300 Instrukcja

5 Września 2024

American DJ Bubbletron Go Instrukcja

4 Września 2024

American DJ Mega QA Go Instrukcja

2 Września 2024

American DJ Stinger II Instrukcja

1 Września 2024

American DJ Entour Cyclone Instrukcja

31 Sierpnia 2024

American DJ Dotz TPar System Instrukcja

31 Sierpnia 2024

American DJ Mega Flat Pak 8 Plus Instrukcja

28 Sierpnia 2024

Instrukcje Maszyna efektów

Najnowsze instrukcje dla Maszyna efektów

Antari FT-70 Instrukcja

5 Grudnia 2024

Velleman vdl660rl Instrukcja

10 Października 2024

Valcom V-5580041A Instrukcja

8 Października 2024

Magmatic Magma Fog 1500IP-II Instrukcja

8 Października 2024

Magmatic PMDMX1 Instrukcja

8 Października 2024

Magmatic CRISP Instrukcja

8 Października 2024

Magmatic CRISP MAX Instrukcja

8 Października 2024

Magmatic SIDEWINDER Instrukcja

8 Października 2024

Magmatic JAVELIN Instrukcja

8 Października 2024

Magmatic MAGMA FOG 1500 IP Instrukcja

8 Października 2024