Instrukcja obsługi American DJ Mega QA Go

American DJ Maszyna efektów Mega QA Go

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla American DJ Mega QA Go (16 stron) w kategorii Maszyna efektów. Ta instrukcja była pomocna dla 2 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF

Strona 1/16

User Instructions

10/16

Mega Qa go

specications, diagrams, images, and instructions herein are

subject to change without notice. ADJ Products, LLC logo and

identifying product names and numbers herein are trademarks

of ADJ Products, LLC. Copyright protection claimed includes all

forms and matters of copyrightable materials and information

now allowed by statutory or judicial law or hereinafter granted.

Product names used in this document may be trademarks or

registered trademarks of their respective companies and are

hereby acknowledged. All non-ADJ Products, LLC brands and

product names are trademarks or registered trademarks of their

respective companies.

ADJ Products, LLC and all aliated companies hereby dis-

claim any and all liabilities for property, equipment, building,

and electrical damages, injuries to any persons, and direct or

indirect economic loss associated with the use or reliance of

any information contained within this document, and/or as a

result of the improper, unsafe, unsucient and negligent as-

sembly, installation, rigging, and operation of this product.

Europe Energy Saving Notice

Energy Saving Matters (EuP 2009/125/EC)

Saving electric energy is a key to help protecting the enviroment.

Please turn o all electrical products when they are not in use. To

avoid power consumption in idle mode, disconnect all electrical

equipment from power when not in use. Thank you!

ADJ Products, LLC - www.adj.com - Mega QA Go User Manual Page 3ADJ Products, LLC - www.adj.com - Mega QA Go User Manual Page 2

• Five Operating Modes

• Electronic Dimming 0-100%

• 5 Selectable Dimming Curves

• 64 Color Macros

• Built in Microphone

• DMX-512 protocol

• 3-Pin DMX Connection

• 8 DMX Modes: 1 Channel Mode, 2 Channel Mode, 3 Channel

Mode, 4 Channel Mode, 5 Channel Mode, 6 Channel Mode, 7

Channel Mode, & 8 Channel Mode.

• ADJ UC IR, (Not Included) & Airstream IR compatible

• Power Cord Daisy Chain (See page 26)

Mega QA Go Warranty Registration

Mega QA Go Features

The Mega QA Go 2 year limited warranty. Please fill out the carries a

enclosed warranty card to validate your purchase. All returned service

items whether under warranty or not, must be freight pre-paid and

accompany a return authorization (R.A.) number. The R.A. number

must be clearly written on the outside of the return package. A brief

description of the problem as well as the R.A. number must also be

written down on a piece of paper included in the shipping carton. If

the unit is under warranty, you must provide a copy of your proof of

purchase invoice. You may obtain a R.A. number by contacting our

customer support team on our customer support number. All pack-

ages returned to the service department not displaying a R.A. number

on the outside of the package will be returned to the shipper.

The unit should be mounted using a mounting clamp (not provided),

axing it to the mounting bracket that is provided with the unit.

Always ensure that the unit is rmly xed to avoid vibration and slip-

ping while operating. Always ensure that the structure to which you

are attaching the unit is secure and is able to support a weight of 10

times the unit’s weight. Also, always use a safety cable that can hold

12 times the weight of the unit when installing the xture.

The equipment must be installed by a professional, and it must be

installed in a place where it is out of the reach of people’s grasp.

Mega QA Go Installation

Mega QA Go Introduction

Unpacking: Thank you for purchasing the Mega QA Go by ADJ Prod-

ucts, LLC. Every Mega QA Go has been thoroughly tested and has

been shipped in perfect operating condition. Carefully check the ship-

ping carton for damage that may have occurred during shipping. If the

carton appears to be damaged, carefully inspect your xture for any

damage and be sure all accessories necessary to operate the unit has

arrived intact. In the case damage has been found or parts are miss-

ing, please contact our toll free customer support number for further

instructions. Do not return this unit to your dealer without rst contact-

ing customer support.

Introduction: The ADJ Mega QA Go is a DMX intelligent, high powered

LED par fixture. This xture can be used in a stand alone mode or con-

nected in a Master/Slave conguration. This wash has five operating

modes: Sound Active mode, Auto Run mode, RGBA Dimmer mode,

Static Color mode, and DMX control mode. To optimize the perfor-

mance of this product, please read these operating instructions care-

fully to familiarize yourself with the basic operations of this unit. These

instructions contain important safety information regarding the use and

maintenance of this unit. Please keep this manual with the unit, for

future reference.

Customer Support: ADJ Products, LLC provides a customer support

line, to provide set up help and to answer any question should you

encounter problems during your set up or initial operation. You may

also visit us on the web at www.adj.com for any comments or sugges-

tions. Service Hours are Monday through Friday 8:00 a.m. to 4:30 p.m.

Pacic Standard Time.

Voice: (323) 582-3322

Fax: (323) 582-3108

E-mail: support@AmericanDJ.com

Warning! To prevent or reduce the risk of electrical shock or re, do

not expose this unit to rain or moisture.

Caution! There are no user serviceable parts inside this unit. Do not

attempt any repairs yourself, doing so will void your manufactures war-

ranty. In the unlikely event your unit may require service please contact

ADJ Products, LLC.

PLEASE recycle the shipping carton when ever possible.

Mega QA Go Safety Precautions

ADJ Products, LLC - www.adj.com - Mega QA Go User Manual Page 4 ADJ Products, LLC - www.adj.com - Mega QA Go User Manual Page 5

• To reduce the risk of electrical shock or re, do not expose this unit

rain or moisture

• Do not spill water or other liquids into or on to your unit.

• Do not attempt to operate this unit if the power cord has been

frayed or broken. Do not attempt to remove or break o the ground

prong from the electrical cord. This prong is used to reduce the risk

of electrical shock and re in case of an internal short.

• Disconnect from main power before making any type of connection.

• Do not remove the cover under any conditions. There are no user

serviceable parts inside.

• Never operate this unit when it’s cover is removed.

• Never plug this unit in to a dimmer pack

• Always be sure to mount this unit in an area that will allow proper

ventilation. Allow about 6” (15cm) between this device and a wall.

• Do not attempt to operate this unit, if it becomes damaged.

• This unit is intended for indoor use only, use of this product out`

doors voids all warranties.

• During long periods of non-use, disconnect the unit’s main power.

• Always mount this unit in safe and stable matter.

• Power-supply cords should be routed so that they are not likely to

be walked on or pinched by items placed upon or against them,

paying particular attention to the point they exit from the unit.

• Cleaning -The fixture should be cleaned only as recommended by

t he manufacturer. See page 31 for cleaning details.

• Heat -The appliance should be situated away from heat sources

such as radiators, heat registers, stoves, or other appliances (inclu-

d ing amplifiers) that produce heat.

• The fixture should be serviced by qualified service personnel when:

A. The power-supply cord or the plug has been damaged.

B. Objects have fallen, or liquid has been spilled into the appliance.

C. The appliance has been exposed to rain or water.

D. The appliance does not appear to operate normally or exhibits a

marked change in performance.

1. Handling of Batteries

1.1 Do Not Short Circuit the Battery

Try to never short circuit the battery. It generates a very high

current which could cause the battery to overheat which may

result in electrolyte gel leakage, harmful fumes, or explosion.

The LIR tabs may easily short-circuit by placing them on con-

ductive surface. A short circuit may lead to heat build up and

damage of the battery. An appropriate circuitry with PCM is

employed to protect accidental short circuit of the battery pack.

1.2 Mechanical shock

Droping the unit, impact hit, bending, etc. may cause failure or

shortend life of the LIR battery.

3. Other

3.1 Battery connection

1). Direct soldering of wire leads or devices to the battery is

strictly prohibited.

2). Lead tabs with pre-soldered wiring shall be spot welded to

the batteries. Direct soldering may cause damage of compo-

nents, such as separator and insulator, by heat build up.

3.2 Prevention of short circuit within a battery pack

There is enough insulation layers between wiring and the bat-

teries to provide extra safety protection. The battery pack is

constructed in a way that no short circuit will occur which may

cause smoke or re.

3.3 Do No Disassemble the Batteries

1). Never disassemble the batteries.

Doing this may cause a internal short circuit in the battery,

which may lead to harmful fumes, re, explosion, or other prob-

lems.

2). Electrolyte Gel is harmful

Electrolyte Gel should not leak from the LIR battery. Should the

electrolyte gel come into contact with the skin or eyes, ush the

Mega QA Go Battery Precautions

Specyfikacje produktu

Marka:	American DJ
Kategoria:	Maszyna efektów
Model:	Mega QA Go

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z American DJ Mega QA Go, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą

Twoje imię*

Twój email*

Napisz tutaj swoje pytanie

Instrukcje Maszyna efektów American DJ

American DJ Boom Box FX2 Instrukcja

6 Września 2024

American DJ H2O DMX IR Instrukcja

5 Września 2024

American DJ VF1600 Instrukcja

5 Września 2024

American DJ VF1300 Instrukcja

5 Września 2024

American DJ Bubbletron Go Instrukcja

4 Września 2024

American DJ Mega QA Go Instrukcja

2 Września 2024

American DJ Mega Flat Pak 8 Plus Instrukcja

28 Sierpnia 2024

American DJ Focus Spot 5Z Instrukcja

23 Sierpnia 2024

American DJ Fog Fury 2000 Instrukcja

22 Sierpnia 2024

American DJ VF400 Instrukcja

17 Sierpnia 2024

Instrukcje Maszyna efektów

Najnowsze instrukcje dla Maszyna efektów

Velleman vdl660rl Instrukcja

10 Października 2024

Valcom V-5580041A Instrukcja

8 Października 2024

Magmatic Magma Fog 1500IP-II Instrukcja

8 Października 2024

Magmatic PMDMX1 Instrukcja

8 Października 2024

Magmatic CRISP Instrukcja

8 Października 2024

Magmatic CRISP MAX Instrukcja

8 Października 2024

Magmatic SIDEWINDER Instrukcja

8 Października 2024

Magmatic JAVELIN Instrukcja

8 Października 2024

Magmatic MAGMA FOG 1500 IP Instrukcja

8 Października 2024

BeamZ BLAZE3500 Instrukcja

8 Października 2024