Instrukcja obsługi American DJ Boom Box FX2

American DJ Maszyna efektów Boom Box FX2

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla American DJ Boom Box FX2 (3 stron) w kategorii Maszyna efektów. Ta instrukcja była pomocna dla 2 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF

Strona 1/3

2/17

User Instructions

specications, diagrams, images, and instructions herein are

subject to change without notice. ADJ Products, LLC logo and

identifying product names and numbers herein are trademarks

of ADJ Products, LLC. Copyright protection claimed includes all

forms and matters of copyrightable materials and information

now allowed by statutory or judicial law or hereinafter granted.

Product names used in this document may be trademarks or

registered trademarks of their respective companies and are

hereby acknowledged. All non-ADJ Products, LLC brands and

product names are trademarks or registered trademarks of their

respective companies.

ADJ Products, LLC and all aliated companies hereby dis-

claim any and all liabilities for property, equipment, building,

and electrical damages, injuries to any persons, and direct or

indirect economic loss associated with the use or reliance of

any information contained within this document, and/or as a

result of the improper, unsafe, unsucient and negligent as-

sembly, installation, rigging, and operation of this product.

Europe Energy Saving Notice

Energy Saving Matters (EuP 2009/125/EC)

Saving electric energy is a key to help protecting the enviroment.

Please turn o all electrical products when they are not in use. To

avoid power consumption in idle mode, disconnect all electrical

equipment from power when not in use. Thank you!

Boom Box Fx2

ADJ Products, LLC - www.adj.com - Boom Box FX2 Instruction Manual Page 5ADJ Products, LLC - www.adj.com - Boom Box FX2 Instruction Manual Page 4

Safety Issues: This unit may “pop” the fuse if the maximum allotted

load of 2 amps is reached.

• To reduce the risk of electrical shock or re, do not expose this unit

rain or moisture.

• Do not spill water or other liquids into or on to your unit.

• Do not attempt to remove or break o the ground prong from the

electrical cord. This prong is used to reduce the risk of electrical

shock and re in case of an internal short. Do not attempt to oper-

ate this unit if the power cord has been frayed or broken.

• Disconnect from main power before making any type of connection.

• Do not remove the cover under any conditions. There are no user

serviceable parts inside.

• Always be sure to mount this unit in an area that will allow proper

ventilation. Allow about 6” (15cm) between this device and a wall.

• Do not attempt to operate this unit, if it becomes damaged.

• This unit is intended for indoor use only, use of this product out-

doors voids all warranties.

• During long periods of non-use, disconnect the unit’s main power.

• Always mount this unit in safe and stable matter.

• Power cords should be routed so they are not likely to be walked

on, pinched by items placed upon or against them.

• Cleaning -The fixture should be cleaned only as recommended by

the manufacturer. See page 23 for cleaning details.

• Heat -The appliance should be situated away from heat sources

such as radiators, heat registers, stoves, or other appliances

(including amplifiers) that produce heat.

• The fixture should be serviced by qualified service personnel when:

A. The power-supply cord or the plug has been damaged.

B. Objects have fallen, or liquid has been spilled into the unit.

C. The unit has been exposed to rain or water.

D. The unit does not appear to operate normally or exhibits a

marked change in performance.

LASER RADIATION AVOID

DIRECT EYE EXPOSUR E

Maximum output <5 mW

Wavelength: 405, 532n m

Class IIIa laser produc t

This device complies with 21 CF chapter R I,

Subchapter J, or CFR 1040.10 an 1040.1 d 1

Boom Box FX2 Safety Precautions

NON-INTERLOCKED HOUSING WARNING

The Royal Sky contains high power laser devices internally. Do not

open the laser housing, due to the potential exposure to unsafe levels

of laser radiation. The laser power levels, if the unit is opened, can

cause instant blindness, skin burns and res.

STOP AND READ ALL LASER SAFETY DATA

OPERATION INSTRUCTIONS AND LASER SAFETY

The light source emitted from this product can potentially cause eye

injury if not set up and used properly. The light source emitted from a

laser is very dierent from any other light sources with which you may

be aware of. Laser light is thousands of times more concentrated

than any light from any other kind of light source. This concentration

of light can cause instant eye injuries, primarily by burning the retina

(the back of your eyeball contatining cells that are sensitive to light).

Even if you cannot feel “heat” from a laser beam, it can still poten-

tially injure or blind you or your audience. Even very small amounts

of laser beam light are potentially hazardous even at long distances.

Laser eye injuries can be sustained faster than you can blink.

Do not think that because this laser splits the laser beam into hun-

dreds of beams and that the laser beam is scanned out in high

speed, that an individual laser beam is safe for eye exposure. This

laser uses dozens of milliwatts of laser power (Class 3B levels inter-

nally) before it splits into multiple beams (Class 3R levels). Many of

the individual beams are potentially hazardous to the eyes.

Do not that because the laser light is moving, it is safe. This is not

true. Nor, do the laser beams always move. Since eye injuries can

occur instantly, it is critical to prevent even the smallest possibility of

any direct eye exposure. In the laser safety regulation, it is not legal

to aim Class 3R lasers in areas which people can get exposed. This

is true even if it is aimed below people’s faces, such as on a dance

oor.

Do not operate the laser without rst reading and understanding

all safety and technical data in this manual.

Always set up and install all laser eects so that all laser light is at

least 3 meters (9.8 feet) above the oor on which people can stand.

Boom Box FX2 Laser Warnings and Safety

ADJ Products, LLC - www.adj.com - Boom Box FX2 Instruction Manual Page 6 ADJ Products, LLC - www.adj.com - Boom Box FX2 Instruction Manual Page 7

Power Supply: The ADJ Boom Box FX2 contains a automatic volt-

age switch, which will auto sense the voltage when it is plugged into

the power source. With this switch there is no need to worry about the

correct power voltage, this unit can be plugged in anywhere.

DMX-512: -DMX is short for Digital Multiplex. This is a universal pro

tocol used by most lighting and controller manufactures as a form of

communication between intelligent fixtures and controllers. A DMX

controller sends DMX data instructions from the controller to the fix-

ture. DMX data is sent as serial data that travels from fixture to fixture

via the DATA “IN” and DATA “OUT” XLR terminals located on all DMX

fixtures (most controllers only have a DATA “OUT” terminal).

DMX Linking: DMX is a language allowing all makes and models of

dierent manufactures to be linked together and operate from a sin-

gle controller, as long as all xtures and the controller are DMX com-

pliant. To ensure proper DMX data transmission, when using several

DMX fixtures try to use the shortest cable path possible. The order

in which fixtures are connected in a DMX line does not influence the

DMX addressing. For example; a fixture assigned a DMX address of 1

may be placed anywhere in a DMX line, at the beginning, at the end,

or anywhere in the middle. When a fixture is assigned a DMX address

of 1, the DMX controller knows to send DATA assigned to address 1

to that unit, no matter where it is located in the DMX chain.

Data Cable (DMX Cable) Requirements (For DMX and Master/Slave

Operation): The Boom Box FX2 can be controlled via DMX-512 proto-

col. The Boom Box FX2 is has 2 DMX channel modes, a 3 channel mode

and 19 channel mode. The DMX address is set electronically using the

controls on the back panel of the unit. Your unit and your DMX control-

ler require a approved DMX-512 110 Ohm Data cable for data input and

data output (Figure 1). We recommend Accu-Cable

DMX cables. If you are making your own cables, be

sure to use standard 110-120 Ohm shielded cable

(This cable may be purchased at almost all pro-

fessional sound and lighting stores). Your cables

should be made with a male and female XLR con-

nector on either end of the cable. Also remember

that DMX cable must be daisy chained and cannot

be split.

Boom Box FX2 DMX Set Up

Figure 1

After setting up, and before public use, test laser to ensure proper

function. Do not use if any defect is detected. Do not use if laser

emits only one or two laser beams rather than dozens/hundreds, as

this could indicate damage to the diraction grating optic, and could

allow emission of higher laser levels above Class 3R.

Do not point lasers at people or animals. Never look into the laser

aperture or laser beams.

Do not point lasers in areas in which people can potentially get

exposed, such as uncontrolled balconies, etc.

Do not point lasers at highly reective surfaces, such as windows,

mirrors and shiny metal. Even laser reections can be hazardous.

Never point a laser at aircraft, this is a federal oense.

Never point un-terminated laser beams into the sky.

Do not expose the output optic (aperture) to cleaning chemicals.

Do not use laser if the laser appears to be emitting only one or two

beams.

Do not use the laser if the housing is damaged, the housing is open,

or if the optics appear damaged in any way.

Never open the laser housing. The high laser power levels inside of

the protective housing can start res, burn skin and will cause instant

eye injury.

Never leave this device running unattended.

The operation of a class 3R laser show is only allowed if the show

is controlled by a skilled and well- trained operator, familiar with the

data included in this manual.

The legal requirements for using laser entertainment products vary

from country to country. The user is responsible for the legal require-

ments at the location/country of use.

Always use proper lighting safety cables when hanging lights and

eects overhead.

Boom Box FX2 Laser Warnings and Safety

Specyfikacje produktu

Marka:	American DJ
Kategoria:	Maszyna efektów
Model:	Boom Box FX2

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z American DJ Boom Box FX2, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą

Twoje imię*

Twój email*

Napisz tutaj swoje pytanie

Instrukcje Maszyna efektów American DJ

American DJ Boom Box FX2 Instrukcja

6 Września 2024

American DJ H2O DMX IR Instrukcja

5 Września 2024

American DJ VF1600 Instrukcja

5 Września 2024

American DJ VF1300 Instrukcja

5 Września 2024

American DJ Bubbletron Go Instrukcja

4 Września 2024

American DJ Mega QA Go Instrukcja

2 Września 2024

American DJ Stinger II Instrukcja

1 Września 2024

American DJ Entour Cyclone Instrukcja

31 Sierpnia 2024

American DJ Dotz TPar System Instrukcja

31 Sierpnia 2024

American DJ Mega Flat Pak 8 Plus Instrukcja

28 Sierpnia 2024

Instrukcje Maszyna efektów

Najnowsze instrukcje dla Maszyna efektów

Antari FT-70 Instrukcja

5 Grudnia 2024

Velleman vdl660rl Instrukcja

10 Października 2024

Valcom V-5580041A Instrukcja

8 Października 2024

Magmatic Magma Fog 1500IP-II Instrukcja

8 Października 2024

Magmatic PMDMX1 Instrukcja

8 Października 2024

Magmatic CRISP Instrukcja

8 Października 2024

Magmatic CRISP MAX Instrukcja

8 Października 2024

Magmatic SIDEWINDER Instrukcja

8 Października 2024

Magmatic JAVELIN Instrukcja

8 Października 2024

Magmatic MAGMA FOG 1500 IP Instrukcja

8 Października 2024