Instrukcja obsługi American DJ Pinspot LED

American DJ Maszyna efektów Pinspot LED

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla American DJ Pinspot LED (2 stron) w kategorii Maszyna efektów. Ta instrukcja była pomocna dla 10 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF

Strona 1/2

Pinspot LED SPECIFICATIONS:

LED: 3W

Working Position: Any safe working position

Power Input Voltage: 100~240V AC 50/60Hz

Weight: 1lbs./ .5Kgs.

Dimensions: 5.75”(L) x 3”(W) x 2.4”(H)

145 x 75 x 61mm

Warranty: 3 Year (1095 days)

Pinspot LED

Unpacking: Thank you for purchasing the Pinspot LED by American DJ®. Every Pinspot LED has

been thoroughly tested and has been shipped in perfect operating condition. Carefully check the ship-

ping carton for damage that may have occurred during shipping. If the carton appears to be damaged,

carefully inspect your xture for any damage and be sure all accessories necessary to operate the unit

has arrived intact. In the case damage has been found or parts are missing, please contact our toll free

customer support number for further instructions. Do not return this unit to your dealer without rst

contacting customer support.

Introduction: The Pinspot LED is part of American DJ’s continuing pursuit for creating high qual-

ity affordable xtures. The Pinspot LED is a simple, small LED Pin Spot. This pin spot is light weight

and compact which makes it a great piece for mobile DJ’s, archtectural lighting, or ligting effect. The

Pinspot LED is also suitable for theaters, studios, retail stores, and other similar locations.

Lens Change: The Pinspot LED comes with a standard 12 degree lens already attached. Included in

the box is an optional 6 degree lens. To switch lenses simply remove the retainer ring in front of the

current lens, carefully remove the lens, and attach the 6 degree lens. Replace the retainer ring and the

switch is complete.

Installation: The unit should be mounted using a mounting clamp (not provided), afxing it to the

mounting bracket that is provided with the unit. Always ensure that the unit is rmly xed to avoid

vibration and slipping while operating. Always ensure that the structure to which you are attaching the

unit is secure and is able to support a weight of 10 times the unit’s weight. Also, always use a safety

cable that can hold 12 times the weight of the unit when installing the xture.

The equipment must be installed by a professional, and it must be installed in a place where it is out

of the reach of people’s grasp.

4000358

Caution!

No user serviceable parts inside do not attempt repairs. In the event your Pinspot

LED should fail, contact AmericanDJ®.

Customer Support: American DJ provides a toll free customer support line, to provide set up help and to ®

answer any question should you encounter problems during your set up or initial operation. You may also visit

us on the web at www.americandj.com for any comments or suggestions. Service Hours are Monday through

Friday 9:00 a.m. to 5:00 p.m. Pacic Standard Time.

Voice: (800) 322-6337 Fax: (323) 582-2941 E-mail: support@americandj.com

The Please Pinspot LED carries a 3 year (1095 day) limited warranty. fill out the enclosed warranty card

to validate your purchase. All returned service items whether under warranty or not, must be freight

pre-paid and accompany a return authorization (R.A.) umber. If the is under warranty you n remote

must provide a copy of your proof of purchase invoice. Please contact American DJ® customer sup-

port for a R.A. number.

MANUFACTURER’S LIMITED WARRANTY

A. American DJ, Inc. hereby warrants, to the original purchaser, American DJ and American Audio products to be free of manufacturing defects in

material and workmanship for a prescribed period from the date of purchase (see specic warranty period on reverse). This warranty shall be valid only if

the product is purchased within the United States of America, including possessions and territories. It is the owner’s responsibility to establish the date and

place of purchase by acceptable evidence, at the time service is sought.

B. For warranty service you must obtain a Return Authorization number (RA#) before sending back the product. Contact American DJ, Inc. Service

Department at 800-322-6337. Send the product only to the American DJ, Inc. factory. All shipping charges must be pre-paid. If the requested repairs or

service (including parts replacement) are within the terms of this warranty, American DJ, Inc. will pay return shipping charges only to a designated point

within the United States. If the entire instrument is sent, it must be shipped in it’s original package. No accessories should be shipped with the product. If

any accessories are shipped with the product, American DJ, Inc. shall have no liability whatsoever for loss of or damage to any such accessories, nor for the

safe return thereof.

C. This warranty is void if the serial number has been altered or removed; if the product is modied in any manner which American DJ, Inc. con-

cludes, after inspection, affects the reliability of the product; if the product has been repaired or serviced by anyone other than the American DJ, Inc. factory

unless prior written authorization was issued to purchaser by American DJ, Inc.; if the product is damaged because not properly maintained as set forth in

the instruction manual.

D. This is not a service contract, and this warranty does not include maintenance, cleaning or periodic check-up. During the period specied above,

American DJ, Inc. will replace defective parts at its expense with new or refurbished parts, and will absorb all expenses for warranty service and repair labor

by reason of defects in material or workmanship. The sole responsibility of American DJ, Inc. under this warranty shall be limited to the repair of the prod-

uct, or replacement thereof, including parts, at the sole discretion of American DJ. All products covered by this warranty were manufactured after January

1, 1990, and bear identifying marks to that effect.

E. American DJ, Inc. reserves the right to make changes in design and/or improvements upon its products without any obligation to include these

changes in any products theretofore manufactured. No warranty, whether expressed or implied, is given or made with respect to any accessory supplied

with products described above. Except to the extent prohibited by applicable law, all implied warranties made by American DJ, Inc. in connection with

this product, including warranties of merchantability or tness, are limited in duration to the warranty period set forth above. And no warranties, whether

expressed or implied, including warranties of merchantability or tness, shall apply to this product after said period has expired. The consumer’s and/or

Dealer’s sole remedy shall be such repair or replacement as is expressly provided above; and under no circumstances shall American DJ, Inc. be liable for

any loss or damage, direct or consequential, arising out of the use of, or inability to use, this product.

This warranty is the only written warranty applicable to American DJ and American Audio Products and supersedes all prior warranties and written descrip-

tions of warranty terms and

conditions heretofore published.

MANUFACTURER’S LIMITED WARRANTY PERIODS:

• All American Audio Products = 1-year (365 day) Limited Warranty (except V-Plus Series Ampliers)

• All American Audio V-Plus Series Ampliers = 3-year (1095 day) Limited Warranty

• American DJ Lighting and American DJ Branded Products = 1-year (365 day) Limited Warranty (Such as: Special Effect Lighting, Intelligent Lighting, UV

lighting, Strobes, Fog Machines, Bubble Machines, Mirror Balls, Par Cans, Trussing, Lighting Stands etc. excluding Laser Products, lamps, and Star Tec

Series)

• American DJ Laser Products and Star Tec Products = 90-Day Limited Warranty

• American DJ L.E.D. Products = 3-year (1095 day) Limited Warranty (excluding motors which have a 1-year (365 day Limited Warranty)