Instrukcja obsługi American DJ Mega Flat Pak 8 Plus

American DJ Maszyna efektów Mega Flat Pak 8 Plus

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla American DJ Mega Flat Pak 8 Plus (16 stron) w kategorii Maszyna efektów. Ta instrukcja była pomocna dla 9 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF

Strona 1/16

diagrams, images, and instructions herein are subject to change without

notice. ADJ logo and identifying product names and numbers herein are

trademarks of ADJ PRODUCTS LLC. Copyright protection claimed includes all

forms and matters of copyrightable materials and information now allowed by

statutory or judicial law or hereinafter granted. Product names used in this

document may be trademarks or registered trademarks of their respective

companies and are hereby acknowledged. All non-ADJ brands and product

names are trademarks or registered trademarks of their respective companies.

ADJ PRODUCTS LLC and all affiliated companies hereby disclaim any and

all liabilities for property, equipment, building, and electrical damages, injuries

to any persons, and direct or indirect economic loss associated with the use

or reliance of any information contained within this document, and/or as a

result of the improper, unsafe, insufficient and negligent assembly, installation,

rigging, and operation of this product.

RISK GROUP 3 - RISK OF EXPOSURE TO

ULTRAVIOLET (UV) RADIATION!

FIXTURE EMITS HIGH INTENSITY WAVELENGTH OF

ULTRAVIOLET LIGHT

WEAR PROPER EYE AND SKIN PROTECTION.

AVOID PROLONGED PERIODS OF EXPOSURE.

AVOID WEARING WHITE COLOR CLOTHING AND/OR

USING (UV) PAINTS ON SKIN.

AVOID DIRECT EYE AND/OR SKIN EXPOSURE AT

DISTANCES SHORTER THAN 11 feet (3.3m).

DO NOT OPERATE FIXTURE WITH DAMAGED/MISSING EXTERNAL COVER

PROTECTIVE LENS.

DO NOT LOOK DIRECTLY INTO THE (UV) LIGHT AND/OR VIEW (UV) LIGHT

DIRECTLY WITH OPTICAL INSTRUMENTS THAT MAY CONCENTRATE THE

LIGHT/RADIATION OUTPUT.

INDIVIDUALS SUFFERING FROM A RANGE OF EYE CONDITIONS, SUNLIGHT

EXPOSURE DISORDERS, OR INDIVIDUALS USING PHOTOSENSITIVE

MEDICATION, MAY RECEIVE DISCOMFORT IF EXPOSED TO THE ULTRAVIOLET

(UV) LIGHT EMITTED FROM THIS FIXTURE.

Energy Saving Matters (EuP 2009/125/EC)

Saving electric energy is a key to help protecting the environment. Please turn

off all electrical products when they are not in use. To avoid power

consumption in idle mode, disconnect all electrical equipment from power

when not in use. Thank you!

Rev. 04/19

User Instructions

MEGA FLAT PAK 8 PLUS

ADJ Products, LLC - www.adj.com - Mega Flat Pak 8 Plus User Manual Page 3

• System Includes: 8 x Mega Par Profile Pluss, 7 x DMX Cables, and

1 x ADJ Carry Bag

• Five Operating Modes

• Electronic Dimming 0-100%

• 5 Selectable Dimming Curves

• 64 Color Macros

• Built in Microphone

• DMX-512 protocol

• 3-Pin DMX Connection

• 5 DMX Modes: 4 Channel Mode, 5 Channel Mode, 6 Channel

Mode, 9 Channel Mode, & 10 Channel Mode.

• ADJ LED RC2 compatiable (Not Included)

• Power Cord Daisy Chain (See page 26)

Mega Flat Pak 8 Plus Warranty Registration

Mega Flat Pak 8 Plus Features

The Mega Flat Pak 8 Plus 2 year limited warranty. Please fill carries a

out the enclosed warranty card to validate your purchase. All returned

service items whether under warranty or not, must be freight pre-paid

and accompany a return authorization (R.A.) number. The R.A. number

must be clearly written on the outside of the return package. A brief

description of the problem as well as the R.A. number must also be

written down on a piece of paper included in the shipping carton. If

the unit is under warranty, you must provide a copy of your proof of

purchase invoice. You may obtain a R.A. number by contacting our

customer support team on our customer support number. All pack-

ages returned to the service department not displaying a R.A. number

on the outside of the package will be returned to the shipper.

The unit’s should be mounted using a mounting clamp (not provided),

axing it to the mounting bracket that is provided with the unit.

Always ensure that the unit is rmly xed to avoid vibration and slip-

ping while operating. Always ensure that the structure to which you

are attaching the unit is secure and is able to support a weight of 10

times the unit’s weight. Also, always use a safety cable that can hold

12 times the weight of the unit when installing the xture.

The equipment must be installed by a professional, and it must be

installed in a place where it is out of the reach of people’s grasp.

Mega Flat Pak 8 Plus Installation

Mega Flat Pak 8 Plus Introduction

ADJ Products, LLC - www.adj.com - Mega Flat Pak 8 Plus User Manual Page 2

Unpacking: Thank you for purchasing the Mega Flat Pak 8 Plus by ADJ

Products, LLC. Every Mega Flat Pak 8 Plus has been thoroughly tested

and has been shipped in perfect operating condition. Carefully check

the shipping carton for damage that may have occurred during ship-

ping. If the carton appears to be damaged, carefully inspect your x-

ture for any damage and be sure all accessories necessary to operate

the unit has arrived intact. In the case damage has been found or parts

are missing, please contact our toll free customer support number for

further instructions. Do not return this unit to your dealer without rst

contacting customer support.

Introduction: The ADJ Mega Flat Pak 8 Plus includes 8 of the poplu-

lar ADJ Mega Par Profile Plus LED wash fixtures, 7 DMX connector

cables, and a soft carrying case to protect your Mega Par Profile Plus

unit’s during transport and dust-free while storing. The Mega Par Profile

Plus is a DMX intelligent, high powered LED par fixture. This xture can

be used in a stand alone mode or connected in a Master/Slave con-

guration. This wash has five operating modes: Sound Active mode,

Auto mode, RGB + UV Dimmer mode, Static Color mode, and DMX

control mode.

Customer Support: ADJ Products, LLC provides a customer support

line, to provide set up help and to answer any question should you

encounter problems during your set up or initial operation. You may

also visit us on the web at www.adj.com for any comments or sugges-

tions. Service Hours are Monday through Friday 8:00 a.m. to 4:30 p.m.

Pacic Standard Time.

Voice: ( ) 800 322-6337

Fax: (323) 582-2941

E-mail: support@adj.com

Warning! To prevent or reduce the risk of electrical shock or re, do

not expose this unit to rain or moisture.

Caution! There are no user serviceable parts inside this unit. Do not

attempt any repairs yourself, doing so will void your manufactures war-

ranty. In the unlikely event your unit may require service please contact

ADJ Products, LLC.

PLEASE recycle the shipping carton when ever possible.

Mega Flat Pak 8 Plus Safety Precautions

ADJ Products, LLC - www.adj.com - Mega Flat Pak 8 Plus User Manual Page 4

Power Supply: The ADJ Mega Par Prole Plus contains a automatic

voltage switch, which will auto sense the voltage when it is plugged

into the power source. With this switch there is no need to worry about

the correct power voltage, this unit can be plugged in anywhere.

DMX-512: DMX is short for Digital Multiplex. This is a universal pro-

tocol used as a form of communication between intelligent fixtures

and controllers. A DMX controller sends DMX data instructions from

the controller to the fixture. DMX data is sent as serial data that trav-

els from fixture to fixture via the DATA “IN” and DATA “OUT” XLR ter-

minals located on all DMX fixtures (most controllers only have a DATA

“OUT” terminal).

DMX Linking: DMX is a language allowing all makes and models of

dierent manufactures to be linked together and operate from a single

controller, as long as all xtures and the controller are DMX compli-

ant. To ensure proper DMX data transmission, when using several

DMX fixtures try to use the shortest cable path possible. The order

in which fixtures are connected in a DMX line does not influence the

DMX addressing. For example; a fixture assigned a DMX address of 1

may be placed anywhere in a DMX line, at the beginning, at the end,

or anywhere in the middle. When a fixture is assigned a DMX address

of 1, the DMX controller knows to send DATA assigned to address 1

to that unit, no matter where it is located in the DMX chain.

Data Cable (DMX Cable) Requirements (For DMX Operation):

The Mega Par Prole Plus can be controlled via DMX-512 protocol. The

Mega Par Prole Plus has 5 DMX modes, please see pages 9-10 for

the dierent modes. The DMX address is set on the back panel of the

Mega Par Prole Plus. Your unit and your DMX

controller require a standard 3-pin XLR connec-

tor for data input and data output (Figure 1). We

recommend Accu-Cable DMX cables. If you are

making your own cables, be sure to use standard

110-120 Ohm shielded cable (This cable may be

purchased at almost all pro lighting stores). Your

cables should be made with a male and female

XLR connector on either end of the cable. Also

remember that DMX cable must be daisy chained

and cannot be split.

ADJ Products, LLC - www.adj.com - Mega Flat Pak 8 Plus User Manual Page 5

Mega Flat Pak 8 Plus Set Up

• To reduce the risk of electrical shock or re, do not expose this unit

rain or moisture

• Do not spill water or other liquids into or on to your unit.

• Do not attempt to operate this unit if the power cord has been

frayed or broken. Do not attempt to remove or break o the ground

prong from the electrical cord. This prong is used to reduce the risk

of electrical shock and re in case of an internal short.

• Disconnect from main power before making any type of connection.

• Do not remove the cover under any conditions. There are no user

serviceable parts inside.

• Never operate this unit when it’s cover is removed.

• Never plug this unit in to a dimmer pack

• Always be sure to mount this unit in an area that will allow proper

ventilation. Allow about 6” (15cm) between this device and a wall.

• Do not attempt to operate this unit, if it becomes damaged.

• This unit is intended for indoor use only, use of this product out`

doors voids all warranties.

• During long periods of non-use, disconnect the unit’s main power.

• Always mount this unit in safe and stable matter.

• Power-supply cords should be routed so that they are not likely to

be walked on or pinched by items placed upon or against them,

paying particular attention to the point they exit from the unit.

• Cleaning -The fixture should be cleaned only as recommended by

t he manufacturer. See page 26 for cleaning details.

• Heat -The appliance should be situated away from heat sources

such as radiators, heat registers, stoves, or other appliances (inclu-

d ing amplifiers) that produce heat.

• The fixture should be serviced by qualified service personnel when:

A. The power-supply cord or the plug has been damaged.

B. Objects have fallen, or liquid has been spilled into the appliance.

C. The appliance has been exposed to rain or water.

D. The appliance does not appear to operate normally or exhibits a

marked change in performance.

Figure 1

Specyfikacje produktu

Marka:	American DJ
Kategoria:	Maszyna efektów
Model:	Mega Flat Pak 8 Plus

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z American DJ Mega Flat Pak 8 Plus, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą

Twoje imię*

Twój email*

Napisz tutaj swoje pytanie

Instrukcje Maszyna efektów American DJ

American DJ Mega Flat Pak 8 Plus Instrukcja

28 Sierpnia 2024

American DJ Focus Spot 5Z Instrukcja

23 Sierpnia 2024

American DJ Fog Fury 2000 Instrukcja

22 Sierpnia 2024

American DJ VF400 Instrukcja

17 Sierpnia 2024

American DJ H2O IR Instrukcja

15 Sierpnia 2024

American DJ Focus Profile Instrukcja

9 Sierpnia 2024

American DJ 32 HEX Panel IP Instrukcja

6 Sierpnia 2024

American DJ ECO UV Bar Plus IR Instrukcja

5 Lipca 2024

American DJ Pinspot LED Instrukcja

4 Lipca 2024

American DJ Fog Storm 1700 Instrukcja

3 Lipca 2024

Instrukcje Maszyna efektów

Najnowsze instrukcje dla Maszyna efektów

Velleman vdl660rl Instrukcja

10 Października 2024

Valcom V-5580041A Instrukcja

8 Października 2024

Magmatic Magma Fog 1500IP-II Instrukcja

8 Października 2024

Magmatic PMDMX1 Instrukcja

8 Października 2024

Magmatic CRISP Instrukcja

8 Października 2024

Magmatic CRISP MAX Instrukcja

8 Października 2024

Magmatic SIDEWINDER Instrukcja

8 Października 2024

Magmatic JAVELIN Instrukcja

8 Października 2024

Magmatic MAGMA FOG 1500 IP Instrukcja

8 Października 2024

BeamZ BLAZE3500 Instrukcja

8 Października 2024