Instrukcja obsługi AKAI BTE-W300ENC

AKAI Zatyczka do uszu BTE-W300ENC

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla AKAI BTE-W300ENC (24 stron) w kategorii Zatyczka do uszu. Ta instrukcja była pomocna dla 4 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/24
BTE-W300ENC
Bluetooth wooden earbuds
User Manual
EN - ENGLISH
SAFETY INFORMATION :
To avoid possible hearing damage, limit listening time to high volumes !
Important safety instructions - read this manual carefully before you will use this product. It is important to keep
this together user manual with the product, for future reference. These warnings have been provided in the
interest of safety ou must read them carefully before installation or use and y :
1. Do not disassemble, repair or modify the product for any reason, as this may cause fire or even completely
destroy the product.
2. Do not expose the product to environments where the temperature is too low or too high (below 0℃ or
above 45℃).
3. Do not use this product during thunderstorms. Thunderstorms may cause the product to malfunction and
increase the risk of electric shocks.
4. Do not wipe and clean the earphones or their case with alcohol or other volatile liquids.
5. Avoid any contact with liquids.
PACKAGE CONTENT:
User manual
Warranty card
E arphones
T - ype C charging cable
Silicone buttons
SPECIFICATIONS:
Frequency range: 20Hz- 20KHz
Max RF output: 8dBm
Bluetooth compatible version: V 5.3
Bluetooth channel emission power: 6dBM
Bluetooth frequency: 2.402- z2.480GH
Working distance: 10m
Music playing time: Around 6 hours
Charging time: 1 hour
Charging time for earphone: 2 hours
Charging time for charging case: 1 hour
Charging port: TYPE- C charging port
Number of times to recharge the earphones a full with y charging case: 2 times
Input: DC5V 300mA
Output: DC5V 22Ma
Supported systems : IOS, Android
Built- in battery type for earphones : 2*50mAh lithium battery
Built-in battery type for charging case : 240mAh lithium battery
F : EATURES
ECO friendly materials
ENC noise reduction
Light weight
NTC charging protection
ENC ( Environmental Noice Cancellation )
ENC is a feature that allows you to reduce background noise. Ambient sounds are automatically recognised and
cancelled out. Your voice can then be heard with heightened clarity. When it comes to ENC technology, the
purpose is to ensure that when you’re making phone calls or recording your voice, everything is crystal clear and
easy to hear.
NTC charging protection:
NTC circuit is designed on the PCBA board of the headphones to provide charging protection. When the NTC circuit
measures that the battery temperature exceeds the preset safety range (usually 45 degrees), the PCBA board will
protect the battery from overheating, overcooling, or being affected by excessive temperature based on the set
protection mechanism, such as disconnecting the charging circuit, stopping charging, etc., thereby reducing safety
risks.
HOW TO USE
Before first use :
Please charge fully the earphones before their first use by ensuring they are properly inserted into the case and
then charging the case using the TYPE C cable provided.-
Power on/Power off :
Power on: Long- press the power button (middle of earbuds) white lights flashing
Power off: Long- press the power button (middle of earbuds) white lights flashing
Automatically turn off earphones :
1. In case of no connection will be established after earphones will be will turn y turned on, the ed off automatically
after 3 minutes
2. The earphones will also turn off automatically when they will have a voltage lower than 3.05V
Bluetooth pairing :
After the charging case is opened, the earphones will automatically enter into pairing mode and will be ready to
connect with bluetooth the phonefrom .
• Pairing: white lights flashing quickly ;
• Completed pairing: white lights flashing slowly ;
Pairing with phone :
Ear uccessfully. phones phones paired will be ready to connect with mobile phone after L & R ear s
On your device, go to the Bluetooth settings and select " BTE- W300ENC ".
If L & R ear fail to pair, please put both earphones phones back to charging case, close the charging case, then the
pair again after re- open.
*After earphones entered in the pairing mode, if no operation is performe for 3 minutes, earphones will
automatically shut down.
Phone call mode :
Rejecting a call: Long press for two seconds
Answering a Call: Double tap the power button
Ending a Call: Double tap the power button
Music mode:
Previous song: Long press the left ear for two seconds
Next song: Long press the right ear for two seconds
Volume up: right ear to volume up 1 tap the
Volume down: 1 tap the left ear to volume down

Specyfikacje produktu

Marka: AKAI
Kategoria: Zatyczka do uszu
Model: BTE-W300ENC

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z AKAI BTE-W300ENC, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje Zatyczka do uszu AKAI

AKAI

AKAI BTE-J10 Instrukcja

3 Stycznia 2025
AKAI

AKAI BTE-J20ANC Instrukcja

2 Stycznia 2025
AKAI

AKAI BTE-W300ENC Instrukcja

2 Stycznia 2025
AKAI

AKAI BTE-W200F Instrukcja

2 Stycznia 2025

Instrukcje Zatyczka do uszu

Najnowsze instrukcje dla Zatyczka do uszu

JBL

JBL Endurance Race 2 Instrukcja

5 Stycznia 2025
JBL

JBL Tune Beam 2 Instrukcja

5 Stycznia 2025
JBL

JBL Tune Flex 2 Instrukcja

5 Stycznia 2025
JBL

JBL Wave Buds 2 Instrukcja

5 Stycznia 2025
JBL

JBL Wave Beam 2 Instrukcja

5 Stycznia 2025
JBL

JBL Wave Flex 2 Instrukcja

5 Stycznia 2025
Audio-Technica

Audio-Technica ATH-CC500BT2 Instrukcja

5 Stycznia 2025
Audio-Technica

Audio-Technica ATH-CKS50TW2 Instrukcja

5 Stycznia 2025
Prixton

Prixton TWS163 Wood Instrukcja

5 Stycznia 2025
JVC

JVC HA-NP40T Instrukcja

4 Stycznia 2025