Instrukcja obsługi Aiwa SB-X350P

Aiwa głośnik SB-X350P

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Aiwa SB-X350P (1 stron) w kategorii głośnik. Ta instrukcja była pomocna dla 13 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/1
Cannot Power On
Charge the speaker and make sure it has enough battery
SB-X350P
Portable Wireless Stereo Speaker
• Bluetooth 5.0
• Support: A2DPV1.2; AVRCPV1.4 GAVDPV1.2;，
AVDTPV1.2; SPPV1.2; AVCTPV1.2
• Wireless work distance: 10 meters
• Output Power: 2*30W
• v Dri er Unit: tDiame er 102 mm outside mangne 4ohmt , , 35W*2
Diame ert 31 mm inside mangne 8ohm t , , 15W*2
• Frequency response: 60Hz 20KHz-
• Signal-to-noise ratio: ≥80DB
• Battery type: Lithium-ion 7.2V/4000MAH(4*2000mah) ,
• DC input voltage/current: TYPE-C USB 5V/0.5A-2A
• Playtime: 2.5-10 hours (varies by volume level and content)
• Battery charge time: 5-6 hours
• Dimensions: 372*193.3*166mm
• Weight: 3.7 kgs
• Keep the speaker and its accessories away from the reach
of kids as they might cause a choking hazard.
• Keep the speaker away from fire, water, liquids, extreme
heat, and strong magnetic fields.
• Do NOT use this speaker at high volume for extended
periods, as this may cause permanent hearing damage or
loss.
• Do NOT drop or knock the speaker on hard surfaces.
• Do NOT use chemicals or detergents to clean the speaker.
• Do NOT scrape the surface with sharp objects.
• Do NOT make unauthorized alterations to this product.
Li ning ste music om fr external audio s eourc
1.Power on the speaker.
2.Using the AUX Cable (φ3.5mm), connect your external
device to AUX-in port on speaker.
3.It will automatically turn to AUX-in mode, the LED
Indicator turns solid green.
Overvivew of Speaker
Charging
Battery Status
Music Control
BIuetooth connection
• 1 x Speaker
• 1 x Type-C charging Cable
• 1 x AUX Cable (Ф3.5mm)
• 1 x User Manual
Previous Song
Next Song
Light Mode
Play
Modes
Power on/off
Bluetooth LED Indicator
Battery LED Indicator
Pause/Play
Package Includes
2nd white light flashes
3rd white light flashes
Fully charged
Low battery (<20%)
Caution
Troubleshooting
Cannot c non ect with the device
Note: Under AUX-IN mode, skip songs are not workable.
Sound mode
Mode Change Button : O
ut ordo /Indoor
1.Before first time use, fully charge the built-in battery.
2.Connect the Type-C Cable (included) between
the Charging port on the speaker, and
a USB port on a computer or USB AC Adapter.
• Please check the following:
• The Bluetooth device supports A2DP profile
• The Speaker is within 10m from the device.
• The Speaker is in pairing mode, the LED indicator
blinking blue.
Note:
• When power on, the speaker automatically
reconnects to the last mobile device it was connected
to. (The speaker can memorize maximum of 8 paired
devices ).
• The speaker will automatically shut down after 10
minutes in pairing mode if no devices are paired for
power saving.
Make sure that the speaker is within 10 meters from
your mobile device,
1. Press button until hear a rising tone and the
Bluetooth LED Indicator fast blinking blue.
2. Go to the Bluetooth settings on your mobile
device, search and select “AIWA SB-X350P” from the list.
3. Once paired, the LED indicator turns blue.
Note: When the battery charge <5% the speaker will ,
power off automatically.
Power On
Press button until hear a rising tone and the Bluetooth
LED Indicator light on.
Power Off
Press button until hear a descending tone and
the Bluetooth LED Indicator light off. Bluetooth Disconnection
TWS (True Wireless Stereo)
Function
The TWS technology enables you to use two speakers
pairing via Bluetooth to create a wireless dual-channel
system to deliver true stereo sound effect.
TWS connection operation
1. Place the two speakers near each other (the distance
should not be over 10 meters).
2. Power on the two speakers, double click the
button
on one speaker as MASTER speaker (playback left
channel ), the LED indicator fast blinking Blue and gree
then the two speaker will pair to each other
automatically ( The other speaker will be as SLAVE
speaker and playback right channel )
3. Once paired, Master and slave speaker LED indicator
turn solid blue
Disconnect the TWS connection
N do Soun
Poor s aound qu lity
• Make sure the music volume is at audible level on both
your device and speaker.
• Make sure your device is successfully paired with the
speaker, the LED indicator turn solid blue.
Move the device closer to this Speaker or remove any
obstacle between them.
Just simple insert your TF card into the port, the speaker
can automatically turn to TF card reader mode, and play
the MP3 music store in the card.
TF d car rea erd (m cri o SD d)car
Battey LED Indicator
Double click “ ” mode button to change the sound
mode The LED indicator slowly flash blue in outdoor .
mode, and the LED indicator keep solid blue in indoor
mode.
Remark: This speaker's default mode is indoor.under the
USB disk and TF card mod LED is green.,
Volume Down/Volume Up
Charging port
USB card reader TF card reader
AUX input
Reset key
Press“ M ” mode button on one of the speaker until LED
Indicator fast blinking Blue to disconnect the TWS
connection .
Reset the sp :eaker lf the function buttons without
working, disconnect the charging cable, place a small
pin (<3mm) into the reset key and hold it for 2 seconds
until the LED light off.
Click ‘ ’ button to change the LED Lights modes.
1: Musical Pulse (Pulse from bottom to top)
2: Half-circle rotation (rotate with the rhythm of the music)
3: Full-Cyclic rotation (rotation speed is automatically
adjusted with the size of the music)
4: Flash rhythm (brightness flashes with the beats of the
music)
5: Musical Pulse (from the middle to the upper and lower
pulse)
6: Turn off the lights
LED M e lights od
Blinking Red (Sound
Prompts 3 times at 20%,
10%, and power off)
30% charged 1st white light flashes
30%-70% charged
70%-99% charged
3 solid white lights
5 6 7 8 9
Press " M " button until the Bluetooth LED Indicator fast
blinking blue to disconnect the current connected device,
and go into new Bluetooth-paring mode.
Volume UP
Play/Pause
Next track
Previous track
Switch Bluetooth mode/Aux-in mode…………Click M
Click
Rotate the knob Clockwise
click
click
Volume Down Rotate the knob Counterclockwise

Specyfikacje produktu

Marka: Aiwa
Kategoria: głośnik
Model: SB-X350P

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Aiwa SB-X350P, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje głośnik Aiwa

Aiwa

Aiwa KBTUS-D800 Instrukcja

13 Stycznia 2025
Aiwa

Aiwa DVR-A600 Instrukcja

13 Stycznia 2025
Aiwa

Aiwa KBTUS-480 Instrukcja

13 Stycznia 2025
Aiwa

Aiwa DVR-M700 Instrukcja

13 Stycznia 2025
Aiwa

Aiwa AX-1PRO Instrukcja

13 Stycznia 2025
Aiwa

Aiwa BST-250 Instrukcja

13 Stycznia 2025
Aiwa

Aiwa APX-1200BT Instrukcja

1 Stycznia 2025
Aiwa

Aiwa RS-X55 Diviner Pro Instrukcja

5 Grudnia 2024
Aiwa

Aiwa SB-X50 Instrukcja

5 Grudnia 2024
Aiwa

Aiwa SB-X350A Instrukcja

5 Grudnia 2024

Instrukcje głośnik

Najnowsze instrukcje dla głośnik

Bowers & Wilkins

Bowers & Wilkins LCR3 Instrukcja

15 Stycznia 2025
Hifonics

Hifonics Vulcan VX6.2E Instrukcja

15 Stycznia 2025
Pyle

Pyle PLRGSW64BK Instrukcja

15 Stycznia 2025
ION

ION Insta Sound Instrukcja

15 Stycznia 2025
Pure Acoustics

Pure Acoustics QBT-340 Instrukcja

15 Stycznia 2025
Yamaha

Yamaha WX-010 Instrukcja

15 Stycznia 2025
Polk

Polk REACT SOUND BAR 1 Instrukcja

15 Stycznia 2025
Sennheiser

Sennheiser AMBEO Soundbar Plus SB02M Instrukcja

15 Stycznia 2025
Klipsch

Klipsch Reference RB-25 Instrukcja

15 Stycznia 2025
Klipsch

Klipsch Reference RB-35 Instrukcja

15 Stycznia 2025