Instrukcja obsługi Zebra H390

Zebra Zatyczka do uszu H390

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Zebra H390 (6 stron) w kategorii Zatyczka do uszu. Ta instrukcja była pomocna dla 8 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/6
Quick Start Guide
motorola
H390
Before using this product, read the Important Safety and Legal
Information pamphlet and follow its instructions.
Take a moment before you get started to
familiarize yourself with your new
H390 Headset.
BEFORE YOU BEGIN
Call Button
Power Switch
Indicator
Light
Volume
Buttons
Microphone
Speaker
Earhook
Indicator Light
Charging
Port
1
CHARGE
Your Headset's Battery
Verify slide switch is in the off position (toward
the charging port).
Plug the Motorola charger into the end of the
headset.
The indicator light turns red or yellow when the
battery is charging. It may take up to 1 minute
for the indicator light to turn on. When the
headset's battery is fully charged (about 2
hours), the indicator light turns green.
Disconnect the charger.
1
2
Note: Headset is not functional while charging.
Note: This product uses a lithium ion, rechargeable,
non-replaceable battery. Under normal use, the expected life
of the rechargeable battery is approximately 400 charges.
3
2
START BLUETOOTH
FEATURE
Your Phone
Press (Menu) > Settings > Connection >
Bluetooth Link > Setup.
Scroll to Power.
Select Change.
Scroll to On.
Press Select to turn on the Bluetooth
feature. The Bluetooth feature remains on
until you turn the feature off.
Note: These steps are for most Motorola phones.
For other phones, see your phone's user's guide.
1
2
3
4
5
Your phone's Bluetooth feature is off by default.
To use your headset, you must turn on the
Bluetooth feature in your phone.
For most Motorola phones (at the main menu):
M
3
PAIR
Your Headset
Before you can use your headset, you must pair
(link) it with your phone.
Step A - ENSURE HEADSET IS IN PAIRING
MODE
Power on headset by sliding the Power switch
towards the microphone to initiate easy
pairing. After a few moments, the indicator
light will be steadily lit in blue to indicate
headset is in pairing mode.
If the headset does not enter pairing mode,
see TROUBLESHOOTING for help.
Indicator Light
(steadily blue
for pairing)
Power Switch
MOTOROLA and the Stylized M Logo are registered in the US
Patent & Trademark Office. The use of wireless devices and their
accessories may be prohibited or restricted in certain areas.
Always obey the laws and regulations on the use of these
products. The Bluetooth trademarks are owned by their
proprietor and used by Motorola, Inc. under license. All other
product or service names are the property of their respective
owners.
© 2008 Motorola, Inc. All rights reserved.
Motorola, Inc.
Consumer Advocacy Office
1307 East Algonquin Road
Schaumburg, IL 60196
www.motorola.com
1-877-MOTOBLU
1-888-390-6456 (TTY/TDD United States for
hearing impaired)
Guide Number: 68000192001-A
Bluetooth QD ID: B014439
3
PAIR CONTINUED
Your Phone
Step B - SET YOUR PHONE TO LOOK FOR
YOUR HEADSET
3
4
5
1
2
For most Motorola phones:
On your Motorola phone, press (Menu) >
Settings > Connection > Bluetooth Link > Handsfree
> Look for Devices.
The phone lists Bluetooth devices it finds.
Select Motorola H390.
Select OK or Yes to pair your headset with
your phone.
Enter the passkey: 0000
Select OK.
When your headset successfully pairs and
connects with your phone, the indicator light
changes from steadily lit to flashing blue and
purple.
Note: These steps are for most Motorola phones.
For other phones, see your phone's user's guide.
M
4
TEST AND USE
Your phone and headset are now paired and
ready to make and receive calls.
To make a call:
Place the headset over your ear.
On the phone, dial the number you want to
call and press SEND key on your phone.
If your phone and headset are successfully
paired, you will hear ringing on the headset.
After you have successfully paired your
phone and headset, you don't need to
repeat these steps. For daily use, ensure
that your headset is turned ON and that
your phone's Bluetooth feature is ON.
1
2
USING YOUR H390
See
Features and
Functions Guide
on the reverse side
for information on
using your H390
Note: If desired, your headset can be restored to
original factory settings. This action will erase all pairing
information stored in your headset. Thus, you will need
to pair your phone and headset again (see step 3).
Note: To restore your headset to original factory
settings, press and hold both Volume buttons and the
Call button at the same time for 10 seconds.
TROUBLESHOOTING
My headset will not enter pairing mode.
Make sure that any devices previously paired
with the headset are turned off. If the indicator
light is not steadily lit in blue, turn off both the
other device and headset, wait 10 seconds,
then turn headset back on. Wait for the indicator
light to become steadily lit in blue, indicating
the headset is now in pairing mode.
My phone doesn't find my headset.
Make sure the indicator light on your headset is
on (lit in blue) and steady when your phone is
searching for devices (see step 3).
My headset worked before but now it's not
working.
Make sure your phone is on and the Bluetooth
feature is turned on in your phone (see step 2).
If the Bluetooth feature was turned off or was
turned on only temporarily, you may need to
restart the Bluetooth feature (see step 2) and
pair your phone and headset again (see step 3).
Support.
If you need more help, contact us at
1-877-MOTOBLU or visit us at
www.motorola.com/Bluetoothsupport

Specyfikacje produktu

Marka: Zebra
Kategoria: Zatyczka do uszu
Model: H390

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Zebra H390, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje Zatyczka do uszu Zebra

Zebra

Zebra H670 Instrukcja

10 Września 2024
Zebra

Zebra Elite Flip Instrukcja

9 Września 2024
Zebra

Zebra H390 Instrukcja

31 Sierpnia 2024
Zebra

Zebra H17 Instrukcja

28 Sierpnia 2024
Zebra

Zebra SF600 Instrukcja

25 Sierpnia 2024
Zebra

Zebra S11-Flex HD Instrukcja

23 Sierpnia 2024
Zebra

Zebra H680 Instrukcja

22 Sierpnia 2024
Zebra

Zebra H720 Instrukcja

19 Sierpnia 2024
Zebra

Zebra H500 Instrukcja

17 Sierpnia 2024

Instrukcje Zatyczka do uszu

Najnowsze instrukcje dla Zatyczka do uszu

Vivanco

Vivanco SR 97 TV Instrukcja

1 Marca 2025
Haylou

Haylou GT1 Pro Instrukcja

14 Stycznia 2025
JLab

JLab Epic Sport ANC 3 Instrukcja

14 Stycznia 2025
JLab

JLab Jbuds Sport ANC 4 Instrukcja

14 Stycznia 2025
Motorola

Motorola Moto Buds 125 Instrukcja

11 Stycznia 2025
Motorola

Motorola Moto Buds 500 ANC Instrukcja

11 Stycznia 2025
GMB Audio

GMB Audio TWS-02 Instrukcja

8 Stycznia 2025
Adidas

Adidas FWD-02 Instrukcja

8 Stycznia 2025
Skullcandy

Skullcandy Jib True XT 2 Instrukcja

7 Stycznia 2025
JBL

JBL Endurance Race 2 Instrukcja

5 Stycznia 2025