Instrukcja obsługi Yamaha RX-V650
Yamaha
Amplituner AV
RX-V650
Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Yamaha RX-V650 (57 stron) w kategorii Amplituner AV. Ta instrukcja była pomocna dla 9 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek
Strona 1/57
RX-V650
AV Receiver
Ampli-tuner audio-vidéo
OWNER’S MANUAL
MODE D’EMPLOI
BEDIENUNGSANLEITUNG
BRUKSANVISNING
GEBRUIKSAANWIJZING
ИНСТРУКЦИЯ ПО ЭКСПЛУАТАЦИИ
G
1 To assure the finest performance, please read this
manual carefully. Keep it in a safe place for future
reference.
2 Install this sound system in a well ventilated, cool,
dry, clean place — away from direct sunlight, heat
sources, vibration, dust, moisture, and/or cold.
Allow ventilation space of at least 30 cm on the top,
20 cm on the left and right, and 20 cm on the back
of this unit.
3 Locate this unit away from other electrical
appliances, motors, or transformers to avoid
humming sounds.
4 Do not expose this unit to sudden temperature
changes from cold to hot, and do not locate this
unit in a environment with high humidity (i.e. a
room with a humidifier) to prevent condensation
inside this unit, which may cause an electrical
shock, fire, damage to this unit, and/or personal
injury.
5 Avoid installing this unit where foreign object may
fall onto this unit and/or this unit may be exposed
to liquid dripping or splashing. On the top of this
unit, do not place:
– Other components, as they may cause damage
and/or discoloration on the surface of this unit.
– Burning objects (i.e. candles), as they may
cause fire, damage to this unit, and/or personal
injury.
– Containers with liquid in them, as they may fall
and liquid may cause electrical shock to the user
and/or damage to this unit.
6 Do not cover this unit with a newspaper, tablecloth,
curtain, etc. in order not to obstruct heat radiation.
If the temperature inside this unit rises, it may
cause fire, damage to this unit, and/or personal
injury.
7 Do not plug in this unit to a wall outlet until all
connections are complete.
8 Do not operate this unit upside-down. It may
overheat, possibly causing damage.
9 Do not use force on switches, knobs and/or cords.
10 When disconnecting the power cord from the wall
outlet, grasp the plug; do not pull the cord.
11 Do not clean this unit with chemical solvents; this
might damage the finish. Use a clean, dry cloth.
12 Only voltage specified on this unit must be used.
Using this unit with a higher voltage than specified
is dangerous and may cause fire, damage to this
unit, and/or personal injury. YAMAHA will not be
held responsible for any damage resulting from use
of this unit with a voltage other than specified.
13 To prevent damage by lightning, disconnect the
power cord from the wall outlet during an electrical
storm.
14 Do not attempt to modify or fix this unit. Contact
qualified YAMAHA service personnel when any
service is needed. The cabinet should never be
opened for any reasons.
15 When not planning to use this unit for long periods
of time (i.e. vacation), disconnect the AC power
plug from the wall outlet.
16 Be sure to read the “TROUBLESHOOTING” section
on common operating errors before concluding
that this unit is faulty.
17 Before moving this unit, press STANDBY/ON to set
this unit in the standby mode, and disconnect the
AC power plug from the wall outlet.
18 VOLTAGE SELECTOR (Asia and General models
only) The VOLTAGE SELECTOR on the rear panel of
this unit must be set for your local main voltage
BEFORE plugging into the AC main supply.
Voltages are:
Asia model ..................... 220/230-240 V AC, 50/60 Hz
General model . 110/120/220/230-240 V AC, 50/60 Hz
■ For U.K. customers
If the socket outlets in the home are not suitable for the
plug supplied with this appliance, it should be cut off and
an appropriate 3 pin plug fitted. For details, refer to the
instructions described below.
The plug severed from the mains lead must be destroyed, as a
plug with bared flexible cord is hazardous if engaged in a live
socket outlet.
■ Special Instructions for U.K. Model
CAUTION: READ THIS BEFORE OPERATING YOUR UNIT.
This unit is not disconnected from the AC power
source as long as it is connected to the wall outlet, even
if this unit itself is turned off. This state is called the
standby mode. In this state, this unit is designed to
consume a very small quantity of power.
WARNING
TO REDUCE THE RISK OF FIRE OR ELECTRIC
SHOCK, DO NOT EXPOSE THIS UNIT TO RAIN
OR MOISTURE.
Note
IMPORTANT
THE WIRES IN MAINS LEAD ARE COLOURED IN
ACCORDANCE WITH THE FOLLOWING CODE:
Blue: NEUTRAL
Brown: LIVE
As the colours of the wires in the mains lead of this
apparatus may not correspond with the coloured
markings identifying the terminals in your plug,
proceed as follows:
The wire which is coloured
BLUE must
be connected
to the terminal which is marked with the letter N or
coloured BLACK. The wire which is coloured
BROWN must be connected to the terminal which is
marked with the letter L or coloured RED.
Making sure that neither core is connected to the earth
terminal of the three pin plug.
1
EnglishPREPARATIONINTRODUCTION
BASIC
OPERATION
SOUND FIELD
PROGRAMS
ADVANCED
OPERATION
ADDITIONAL
INFORMATION
FEATURES............................................................. 2
GETTING STARTED............................................ 3
Supplied accessories .................................................. 3
Installing batteries in the remote control ................... 3
CONTROLS AND FUNCTIONS ......................... 4
Front panel ................................................................. 4
Remote control........................................................... 6
Using the remote control ........................................... 7
Front panel display .................................................... 8
Rear panel ................................................................ 10
SPEAKER SETUP ............................................... 11
Speaker placement ................................................... 11
Speaker connections ................................................ 12
CONNECTIONS .................................................. 15
Before connecting components................................ 15
Connecting video components................................. 16
Connecting audio components................................. 19
Connecting the antennas.......................................... 21
Connecting the power supply cord .......................... 22
Turning on the power............................................... 24
AUTO SETUP....................................................... 25
Introduction..............................................................25
Optimizer microphone setup.................................... 25
Starting the setup ..................................................... 26
PLAYBACK.......................................................... 30
Basic operations....................................................... 30
Selecting sound field programs ............................... 32
Selecting input modes.............................................. 36
TUNING ................................................................ 38
Automatic and manual tuning.................................. 38
Presetting stations .................................................... 39
Selecting preset stations........................................... 41
Exchanging preset stations ...................................... 42
Receiving RDS stations ........................................... 43
Changing the RDS mode ......................................... 43
PTY SEEK function ................................................ 44
EON function........................................................... 45
RECORDING ....................................................... 46
SOUND FIELD PROGRAM
DESCRIPTIONS ...............................................47
For movie/video sources.......................................... 47
For music sources .................................................... 50
ADVANCED OPERATIONS ..............................51
Selecting the OSD mode.......................................... 51
Using the sleep timer ............................................... 51
Manually adjusting speaker levels........................... 52
Using the test tone ................................................... 53
SET MENU ............................................................54
Using SET MENU................................................... 55
1 SOUND MENU.................................................... 56
2 INPUT MENU...................................................... 60
3 OPTION MENU................................................... 61
REMOTE CONTROL FEATURES ...................63
Control area ............................................................. 63
Setting manufacturer codes...................................... 64
Controlling other components ................................. 65
Clearing setup manufacturer codes.......................... 66
EDITING SOUND FIELD PARAMETERS ......67
What is a sound field ............................................... 67
Changing parameter settings ................................... 67
SOUND FIELD PARAMETER
DESCRIPTIONS ...............................................69
TROUBLESHOOTING .......................................73
RESETTING THE FACTORY PRESETS ........78
GLOSSARY ...........................................................79
Audio formats .......................................................... 79
Sound field programs............................................... 80
Audio information ................................................... 80
Video signal information......................................... 81
SPECIFICATIONS...............................................82
CONTENTS
INTRODUCTION
PREPARATION
BASIC OPERATION
SOUND FIELD PROGRAMS
ADVANCED OPERATION
ADDITIONAL INFORMATION
Specyfikacje produktu
| Marka: | Yamaha |
| Kategoria: | Amplituner AV |
| Model: | RX-V650 |
Potrzebujesz pomocy?
Jeśli potrzebujesz pomocy z Yamaha RX-V650, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą
Instrukcje Amplituner AV Yamaha
4 Lipca 2024
4 Lipca 2024
4 Lipca 2024
4 Lipca 2024
4 Lipca 2024
4 Lipca 2024
3 Lipca 2024
3 Lipca 2024
3 Lipca 2024
3 Lipca 2024
Instrukcje Amplituner AV
- Amplituner AV Pioneer
- Amplituner AV Technics
- Amplituner AV Onkyo
- Amplituner AV Denon
- Amplituner AV Kenwood
- Amplituner AV Marantz
- Amplituner AV Harman Kardon
Najnowsze instrukcje dla Amplituner AV
26 Września 2024
25 Września 2024
25 Września 2024
24 Września 2024
21 Września 2024
21 Września 2024
16 Września 2024
11 Września 2024
17 Sierpnia 2024
4 Lipca 2024